Stunning smooth bone (possibly horn) stockman configuration pocket knife sold by Witte Hardware. Made in St. Louis, likely between 1910-1930. There aren't too many Witte knives in...
Beautiful Bridge Cutlery Co brown jigged bone handle Jack knife. Most likely made around 1915. Slight serpentine back. Blades have some signs of age but amazingly still have...
This is a beautiful Victorian Gentleman's Knife. I have about a dozen similar knives I've collected over the years because I find them aesthetically pleasing, and a convenient and...
This sleek utilitarian pen knife is the work of Hermann Schulder. Thanks to user RustyOldKnife for the help identifying the tang stamp. The knife is built well (but wasn't treated...
Fantastic Boker USA pocket knife. Stockman configuration with good snap. Bone handles and a dog bone shield. 1950-1970. See photos and feel free to send...
- Winchester pen knife - Wood handles in good condition - 1980's - Blades minimally unused. Very good condition with good snap no wobble. Master blade tip...
- Hammer Brand Pocket knife - 1940's - Providence, Rhode Island -Faux wood skins in good condition - Single Blade. Some minor oxidation but the blade still...
- Krusius Brother Pocket Knife -1920's to 1940's - Solingen Germany - Pearl Scales. Obvious chip on one side. - 3 blades. 2 knives and one nail file....
- CAMCO Jack Knife - Made in Camillus, NY - Made most likely between 1940-1960 - Black jigged delrin handles - Blades in very good condition with plenty of steel...
- Proto Tools Single Blade Pocket Knife - Tang reads 18520 Proto USA - Likely 1970's - Sheepsfoot Blade. Looks unused. Very good condition with great...
- The Ideal Knife Company - Providence, Rhode Island - Likely between 1930 and 1950 - 2 blades with plenty of steel left and snap, albeit a bit grainy. It's...
- Vintage Imperial Jack Knife - Tang stamp is hard to read but given the "Imperial" stamp it's between 1920-1952 in all likelihood - Tortoise Shell handles - 2...
- Bridge Cutlery Co - St. Louis Missouri - Most likely late 1800's, possibly early 1900's - Smooth bone serpentine handle. Minor chips. See photos for...
- Kutmaster Knife - Utica, NY USA - Made between 1940-1960 - 2 blades that have been sharpened quite a bit, but they still have good snap and no wobble. Oxidation as...
- Utica Cutlery Co - "Featherweight" model Girl Scout Pen Knife - Utica, NY USA - 1940's - Light oxidation, but the handle and blades are in good condition....
This is an unbranded single blade pocket knife with an antique high carbon blade and wooden handles. I've always referred to it as my badass pirate knife. I've been unable to find out...
Remington UMC Pocket Knife 3 Blade Stockman configuration Manufactured in Bridgeport, CT in the 1930s Good snap, no wobble, some oxidation See photos for...
This is a simple, but striking old knife in very good condition. The handles appear to be a dark hardwood which contrast nicely with the pinched bolster. The blade has no tang stamp...
- Craftsman 4 Blade Pocket Knife - Model 95043 - Blacked sawn delrin handles - Made in USA - Likely 1960's - Used but good condition. Blades still have...
- IXL George Wostenholm Pen Knife - Sheffield, England - Pre 1930 - Stainless handle is in excellent condition - Blades have been used and sharpened, but the tang...
- Vintage Camillus #49 Tuxedo Knife - Light and Dark Jigged Bone Handles. No significant chips, cracks, or scratches. - 2 pen knife blades in excellent shape. Both...
- Camillus Cutlery Co. - Tang stamp indicates 1948-1956 - Made in Camillus, NY. - Jigged Bone Handle. Nice light brown color. Two chips, one in the middle bottom...
This is a rare, collectible Fidelity Knife Company Scout knife. Manufactured in the 1940's in Meriden, CT, this knife carries the Scout name on its brass handles. It has some damage to...
Eagle Knife Co single blade ultra utilitarian pocket knife. Based on the style and tang stamp, as well as the known years the company was producing knives, this is like a 1930's or early...
This is a great mid century Queen Cutlery three blade stockman pocket knife in good condition. The handles are unique Winterbottom Bone which is often found on model #9. The blades...
This is a classic, streamlined Boker single blade serpentine handle pocket knife made in the city of steel, Solingen, Germany. It has a red shield with the Tree Brand logo and Solingen...
Vintage German made pocket Knife with some snap left and no wobble. Obvious oxidation, but the knife is still in good structural condition. Very unique and rare Pocket knife. A...
This is a sleek & streamlined vintage pen knife from the Hollinger Cutlery Company, which operated in Fremont, OH the first half of the 20th Century. There isn't a lot of information...
This is a unique and rare Schmachtenberg Bros pen knife. The Schmachtenberg Brothers were producing knives in the late 1800's and early 1900's in Solingen, Germany. The...
Instant collection of classic Barlow knives, all in good condition. Knife 1 - Red sawn delrin handle, Imperial USA blades, light oxidation, decent snap and no wobble. Knife 2 - Black...
Cutlery Company - Knivbolaget Made In - Eskilstuna, Sweden (essentially the Solingen of Sweden) Made - Likely between 1920-1950 Length - Approximately 3.5" Closed...
Beautiful Solingen, Germany knife sold by Peter Klein, likely in the 1950's or 60's. The handle is a unique high end celluloid that mimics a hardwood better than any other celluloid I've...
This is a dual blade pen knife made in Solingen, Germany and sold by Anton Wingen Jr. Anton Wingen Jr. began producing knives in 1888 and the cutlery company manufactured high end cutlery...
This is an unique and quality antique pocket knife imported and sold by WH Morley and Sons. The knife itself was made in Solingen Germany. The handle is beautifully crafted and not...
This is a rare find - a pocket knife manufactured by the Westfield Manufacturing Company. It's pre WWII and produced in Germany. The handle is in very good condition and the blade has...
This is a WH Morley & Sons Clover Leaf 3 blade pocket knife. Made in Germany, before they started manufacturing in the US. So, this is likely late 1800's or very early 1900's....
This is a coin silver two blade pocket knife from 1872. The only markings are "40 Coin" and the inscription that reads "Mr and Mrs L" on one side and "Christmas 1872" on the other....
-Early Imperial Knife Co identifiable by the rhombus tang stamp. ~1920's. - From around 1940-1950 based on the tang stamp and handle styling - celluloid handle -...
This is a knife sold by W Bingham Co, a hardware store in Cleveland, OH. W. Bingham Co. pocket knives were often produced by well-known knife manufacturers such as Cattaraugus Cutlery Co.,...
This unique little gentleman's knife is from the early 1900's, manufactured by A.W. Wadsworth and Sons in Solingen, Germany. It has a small pen blade and a file. I would not be...
This is a vintage Providence Cutlery Co pen knife made in Managua, Nicaragua. Just kidding. It was manufactured in Providence, Rhode Island likely in the 1910's to 1930's. Given...
This is a somewhat rare Sabre Grand Daddy Barlow single blade with a beautiful sawn bone handle. It's likely from the 1960's or 1970's. The blade is in good condition with some expected...
I have to give credit to another AAPK seller who so concisely and expertly detailed an identical knife for sale a few years ago. The prior sale doesn't list the seller's username, otherwise...
Well preserved and maintained Imperial Barlow knife. The blades have good snap and no wobble. I can't provide a reliable date because I haven't found a reference for this exact...
This is a great looking old school C.F. Wolfertz & Co of Allentown, PA. It has a drop point master with a secondary pen. It has expected wear from being used over the years....
This is a yellow handle three blade Ka-bar Stockman pocket knife in very good condition. The knife is robust, at about 4.5" long. All blades have Ka-bar tang stamp. No cracks,...
This is a unique Imperial Hammer Brand knife with an auto open function and lock button. The auto open function isn't currently operational and I'm not sure what it...
This is a real piece of craftsmanship from a bygone era. The tang reads "Rodgers Cutlers To her Majesty" (No England) which I understand to mean its from 1837 to 1901. Based on the...
This is a beautiful red and white dog leg jack 2 blade pocket knife from Federal Knife Company in Syracuse, NY. It's in exceptional condition, especially considering its 80-100 years...
This knife is a sleek and minimalist Case knife from the late seventies. Its model #M279SS, and is all stainless steel construction. It has a spear and pen blades. Both blades open...
For sale is a rare find - A Catskill Knife Company pocket knife. From what I could find, this may actually be a Camillus knife, sold under the Catskill name in the 1930's. Information...
Hello, fellow knife nerds. This is my first knife I'm posting for sale here, so apologies if I omit something or don't follow a typical posting style. This knife is a half whittler...
-Made by Charles "Chas" Clements - Sheffield England - Late 1800's or early 1900's - Farriers knife. Made for working on horse shoes, and hooves - Jigged...
This is a fantastic Witness 2 Blade Barlow style jack knife manufactured in Sheffield, England between 1920-1940. It's in excellent shape with good snap and no wobble. A fantastic and...
