Leichtung Soft Arkansas Stone. The stone itself measures 8"x2"x1/2" and comes in the shown fitted wooden box. Leichtung stones are highly regarded by machinists for tool sharpening. This stone is...

Leichtung Washita Stone. The stone itself measures 8"x2"x1/2" and comes in the shown fitted wooden box. Leichtung stones are highly regarded by machinists for tool sharpening. This stone is in...

NCCO (Novelty Cutlery Co.) Cattaraugus Leg Knife measures 5" closed. This knife was made by Novelty Cutlery Co. in Japan and though not made by Cattaraugus the blade is clearly etched Cattaraugus....

NCCO (Novelty Cutlery Co.) Cattaraugus Leg Knife measures 5" closed. This knife was made by Novelty Cutlery Co. in Japan and though not made by Cattaraugus the blade is clearly etched Cattaraugus....

Ontario Knife Co. Hawkbill Pruner measures 4 1/16" closed. Good snap and blade is tight in frame. Walnut wood handles drilled for lanyard. Blade tang not stamped but blade is nicely etched. Knife...

Buck USA 450U (made 1998) Lock Blade Folder measures 4 1/2" closed. Partially seratted blade is sharp with good open and close snap. Locks up tight with no wobble. Great working...

Utica Cutlery Co. Utica N.Y. Toothpick knife measures 3 5/8" closed. Beautifully jigged brown bone handles with no chips or cracks. Both blades marked with early ached type stamp. Good open and...

Stabilized Spalted Maple Block. This block has been professionally stabilized by K&G and I believe they are the best in the business. Block is completely impregnated with resin and will polish...

Stabilized Spalted Maple Block. This block has been professionally stabilized by K&G and I believe they are the best in the business. Block is completely impregnated with resin and will polish...

Stabilized Spalted Maple Block. This block has been professionally stabilized by K&G and I believe they are the best in the business. Block is completely impregnated with resin and will polish...

Fossilized Walrus Oosik round for fixed blade handle. I have pollished one area on the piece to give you and idea of what it will look like when finished out. Very hard, dense and stable material....

Fossilized Walrus Oosik round for fixed blade handle. I have pollished one area on the piece to give you and idea of what it will look like when finished out. Very hard, dense and stable material....

Fossilized Walrus Oosik round for fixed blade handle. I have pollished one area on the piece to give you and idea of what it will look like when finished out. Very hard, dense and stable material....

Fossilized Walrus Oosik round for fixed blade handle. I have pollished one area on the piece to give you and idea of what it will look like when finished out. Very hard, dense and stable material....

Robeson Mount Vernon Dryer Felt Co liner lock measures 4 1/2" closed. Large English jack style knife. Although not marked in any way with the Robeson name this knife is unmistakably a...

Edward Weck Germany 4 blade pearl congress knife measures just over 2 3/.4" long closed. A very finely made and delicate knife having 4 blades that are all stamped with the Weck name on front and...

Flint Knapped Neck Knife Measures 3 1/8" overall lenght. I can't tell you much about this knife other than what you can see in the pictures. Stag handles and flint Knapped appearing steel blade....

Remington Letter Opener Desk Knife measures 9" overall length. This knife is an original Reminton product that I purchased without the handles and long letter opener blade. Since I have one of...

CASE XX 8271 Long Pull Mother of Pearl Handle equal end pen knife measures 3 1/4" closed. Beautiful MOP handles with no issues. I have always favored this pattern for it's dovetailed bolsters and...

CASE XX STAINLESS 82079 Mother of Pearl Handle sleeveboard pen knife measures 3 3/8" closed. Beautiful MOP handles with no issues. Both blades are stamped on this XX era 1940-1964 knife. Mint,...

CASE TESTED 9364TF pearl senator pen knife. 3 1/8" closed length. There is a crack in the pearl that runs from the bolster to the liner as shown. The crack does not run through the pin. Nice old...

TRENCH ART FIGHTING KNIFE with 7 3/8" double edged blade. With so many knives falsely advertised as "fighting kninves" this knife is the real deal. WWII vintage knife with handle made of...

Two Metal Frame Advertising Knives both measuring 3 1/16" closed. CENTRAL CBD HEATING knife is marked "STAINLESS SHEFFIELD ENGLAND" on the opner blade. PETERS SOLID LEATHER SHOES knife is marked...

Sheffield Butcher Skinning knife. I have had this old Sheffiled blade for over 20 years and finally got around to putting Micarta handles on it. Forged carbon steel that is ground for a very thin...

Sheffield Butcher Skinning knife. I have had this old Sheffiled blade for over 20 years and finally got around to putting Micarta handles on it. Forged carbon steel that is ground for a very thin...

Sheffield Butcher Skinning knife. I have had this old Sheffiled blade for over 20 years and finally got around to putting Micarta handles on it. Forged carbon steel that is ground for a very thin...

KA-BAR Interframe design Advertising Pen Knife. Cracked Ice celluloid handles with 2 tiny areas of separation on the reverse side at master blade end, does not go to or through pin, no chips or...

Made by Norton sold by Pike sharpening stone measures 8"x2"x1". Large and quite old sone in very good condition and laqbled 0-FINE on one end. The top of the stone has the Norton Trademark and...

Waltco SAF-T-SHEATH Outdoor Knife measure 4 1/2" closed. Goins' book dates this company to c.1956. Interesting butterfly type open and close. Scaler back blade appears to be lightly used and full....

Sears Imperial TL29 Type Electricians Knife measures3 3/4" closed without bail. Shell type handle construction. Brown plastic handles. Master blade is nicely etched "SEARS" and clearly...

Browning USA Trapper knife measures 4 3/16" closed. Knife has been lightly used, Dark wood handles and stainless steel blades. I am not sure but I believe these wooden handled Browning folders...

Schrade+ USA 885UH Stockman measures 4" closed. Staglon type handles with UIncle Henry shield. Stainles blades NSL bolsters and brass linners. Older USA made Schrade in mint uused...

Ontario Knife Co. #602 Stockman Knife measures 4" closed. Blade is etched "Ok Ontario 602 Made in USA". Stainless steel blades are tight and snappy. Delrin handles with Old Hickory logo on front....

Craftsman USA 94608 Stockman measures 3 15/16" closed, Blade is etched "Craftsman Gunstock Stainless Steel". Round Shield marked "Soft Grip". Blades are full tight and snap open and closed. Knife...

Remington R12 Trapper Knife is 4 1/8" closed length. Remington blade etch, shield and tang stamp. Immitaion stag handles with no issues. Good snap and blades are tight in frame. Lightly used near...

Remington R1823 Serpentine Jack Knife measures 3 5/8" closed. Strong snap with half stops on both blades with no wobble. Master blade is short in frame as shown. Nice Rogers brown bone handles...

F.C.CO. (Fulton Cutlery Co.by Robeson) Punch Blade Jr. Stockman measures 3 1/4" closed. Unusual pattern with spear master, clip and punch blades. Snap is light but positive on master, good on clip...

Robeson Shuredge Interframe Pen Knife measure 2 3/4" closed. Older script type stamp and back of master tang stamped "PATENTED". Good snap and blades are tight in frame. Interframe type handles in...

Robeson 622393 Peanut Knife measures 2 7/8" closed. Immitation Strawberry bone handles with no issues. Good snap on both blades. SNL Robeson shield and bolsters. Brass...

Camillus #19 Muskrat knife measures 3 7/8" closed. Knife is used with wear and staining to blades. Positive snap on both blades with a bit of side to side movement on the unmarked blade. Staglon...

Schrade+ 285UH trapper is 3 7/8" long closed. Knife appears to have been very lightly used, very near mint condition with original factory edges. One of the older USA made Schrade...

Camillus 4 Line Coke Bottle Folding Hunter measures 5 1/4" closed not including the original heavy bail. Ebony wood handles with no cracks and attractive large banner type shield. Big clip blade...

IMPERIAL Prov. R.I. Toothpick Knife measures 5" closed. Early Imperail with solid bolster construction. Black and cream swirl celluloid handles with no issues. Good open and close snap with side...

Queen Folding Hunter measures 5 1/4" cloesd. Immitation Winterbottom bone handles. Good snap on both blades with no wobble. Many of these knives were not stamped but rather lightly etched out on...

Schrade Cut Co. Walden N.Y. Congress measures 3 1/4" closed. Peach seed bone handles with no chips or cracks. Both blades with half stops and good...

Ulster Stainless N.Y. USA Etched Official Scout measures 3 5/8" closed without bail. Knife is in very near mint condition with original factory edge. Saw cut delrin handles. Good snap all...

American Knife Co. Thomaston Pearl Balloon Whittler measures 3 7/16" closed. Goins book dates this stamp 1875-1895. All blades are stamped, have half stops and open and close snap. Very early and...

Marble's Ideal with full blade measuring just over 7". Handle in very good condition with no issues and 1/2" barrel nut. Original ambidextrous sheath in very good condition. Snap is intact and...

Marbles Ideal with blade measuring just over 7 3/4". Handle is in very good condition with no issues and early 1/2" barrel nut. Original ambidextrous sheath has been restitched at some time...

MSA, Marble's Safety Axe Ideal with blade measuring just over 6 7/8". Handle in very good condition with no issues. Lignum Vitae wodd pommel with 1/2" barrel nut. Pictures show what looks like a...

Marbles Ideal with blade measuring just over 7 3/8". Earlier Ideal with thin handle spacers. Handle is in very good condition with no issues and early 1/2" barrel nut. Original ambidextrous...

Marbles #2 Hound and Hare Hatchet. Has the number 2 stamped clearly on the bottom of the ax heel. Very nice condition on the early and longer clevis style handles showing three minor separations...

Case 8364S Pearl Pen Knife 8 Dot 1972 measures 3 1/8" closed. Knife blade looks to have original factory edge. Beautiful mother of pearl handles with no issues. Tight and snappy in very near mint...

Remington R955 Toothpick Knife measures 5" closed. Attractive red and white patterned celluloid handles with no issues. Steel blosters. Blade is tight with hard snap. Nice used example with lots...

Remington RS3333 Officail Boy Scout knife measures 3 3/4" closed withot bail. Tight and good snap on all blades. Well matched Rogers bone handles with no issues. Punch blade is just a bit short as...

Shapleigh Diamond Edge 4 1/4" Cigar jack. Blades are tight withood open and close snap. Ivory celluloid handles with no issues. Nice older knife with DE shield. Money order or...

Imperial Official Scout Knife measures 3 4/4" Closed. Full blades and all tight with good snap. Solid construction with full bolsters. Some blade etch as shown. Nice example showing some use in...

Stabilized Spalted Maple Block. This block has been professionally stabilized by K&G and I believe they are the best in the business. Block is completely impregnated with resin and will polish...

Fossilized Walrus Oosik round for fixed blade handle. I have pollished one area on the piece to give you and idea of what it will look like when finished out. Very hard, dense and stable material....

Fossilized Walrus Oosik round for fixed blade handle. I have pollished one area on the piece to give you and idea of what it will look like when finished out. Very hard, dense and stable material....