Just a few blems here and there but a very lightl;y used scout kife with four blades and a stainless bail. three brass pins hold down the jigged Delrin handles. All blades have a loud snap. Nickel...
This Camillus folding saw has 12 teeth per inch so it should make short work of just about any wood. 5 1/2" closed, the Zytel feels dry in wet conditions. The L6 saw blade is what most saws are...
At first, I thought it was jigged bone but closer inspection it is jigged black. This material was used during the war years since other material was difficult to obtain so Boker was beginning to...
A collaberation between Mike Skellern and Fred Burger and produced for the mass market by Boker. This is an early model, larger than ones produced today at 4.5" closed. The bogwood/morta handles...
Today, Normark is still in business as Rapala. This knife dates to the 1970's and comes in its original cammo sheath, 6" closed, you can see the blade flex in one of the pics. All brass hardware,...
Made by Anton Wingen under their Othello brand and so stamped on the mark side tang. Pile side has GC Co, 49 for the year made. Made in Solingen Germany. Appears to have the factory edge with some...
This is a six dot 1976 hawk, 11011. Never carried or cleaned. Brass liners, walnut handles held down by four brass pins. 1/2 stop, tight pull. Factory in every respect. Lanyard hole, factory...
This is not a cleaned knife! Three dot 1973 vintage with dark brown jigged bone handles, nickel bolsters, liners and pinned shield. All blades very hard pull and loud snaps. All blades are mirror...
I have sure been busy finding stuff. This one had to be cleaned and polished to be a presentable EDC. Factory tight lockup. Loud snap closed. I don't think it was ever used, just left to tarnish...
I mentioned on the Case site that the handle repair looked like the Borg's eye on Star Trek. Looks like a mechanic that knew the way to form white lead as you can see, it is still holding after...
This is a 1991 made Buck 055, small folding 3 1/2" model with true ebony handles. Curved brass bolsters and frame. Tang stamped Buck 055+ usa. Factory specifications, tab...
Tom lived inside the Disney property in Orlando FL. He was these first and went to court with Disney. Disney lost and had to pay Tom for his court costs. Tom passed six years ago...Buckle made of...
This is a Buck model 532, 4 3/8" closed. Is the blade BG42? I don't know for sure but the Anvil logo dates it to 2002 and that would make BG42 possible. Nickel bolsters and liners with...
At this time, Imperial was owned by Schrade but the operation in Ireland closed in 1980 so not many knives were made there. This 2 inch key fob model is a minature of the large folding hunter....
A.W. Wadsworth was an imaginary name used by Adolf Kastor Bros. a NYC import co. from the 1870's to 1963. They owned a factory in Germany, Germania works in Solingen and imported their knives up...
This model dates to the 60'-70's. A stockman pattern, #95045, USA made for Sears by Camillus. 4" closed, three brass pins hold down the Delrin. 7/8" Craftsman Sears Shield in nickel, as re...
Thomas Lamb designed the wedge lock ergonomic handle for this knife, first produced in 1960 with the patent number 390544 on the front handle near the bolster. The blade is tarnished and has some...
Jim Parker owned Case at the time this knife was made. He had leveridged his other knife businesses to pull off the Case purchase and he would file for bankruptcy in 1991. The ABCA was an...
A big trapper, 4 1/8" closed, factory edge, mint. Nice two tone jigged bone handles held down by three brass rivets. Nickel shield, bolsters, pinched in the front. One dot next to the lightning...
Never used or carried. Factory tight and wicked snap. 3 14" closed, three nickel pins hold down the Appaloosa bone handles. Made in 1979. Mirror polished, no AI description here, Iknow what I'm...
Jim Parker came out with the eagle brand in the mid 70's. This one dates to that period but it was made by Camillus in saw cut Delrin. 4" closed in the stockman pattern. No tang stamps, just the...
Schrade Walden NY switch blade, Paratrooper model. This is a great looking and operating knife. Schrade used a DuPont material that did not shrink, so the handles, held down by 5 brass pins, look...
The Jim Parker Fain Edwards assoc. lasted from 1984-86. mostly Damascus bladed knives were produced but this one is a plain 440c 2 bladed folder, 3 1/2" closed. Tang pattern number is...
The Jim Parker Fain Edwards assoc. lasted from 1984-86. mostly Damascus bladed knives were produced but this one is a plain 440c three bladed folder, 4" closed. Tang pattern number is stamped:...
The Jim Parker Fain Edwards assoc. lasted from 1984-86. mostly Damascus bladed knives were produced but this one is a plain 440c two bladed folder. 3 1/2" closed, tang pattern number is stamped:...
This 90's folder is factory mint in every respect. 2 1/2" closed, top lock and a lanyard hol;e. Stainless frame with a hardwood insert. Frame is beveled all around. Mirror polished blade tang...
Made for Bridgedale in the 80's in Seki japan. 440c stainless, Dark wood handles held down by four nickel pins. Nickel bolsters, brass liners, Top lock. Blade locks tight, loud walk and...
Made in 1993 to celebrate the 60th anniversary of the series. The master blade has a serial number 0460 which makes this knife one of a set of four that was produced by Camillus. Tight, factory...
Sad how the NKCA was raped and pillaged by its own directors. Cargill etc. This 15th anniversary knife is a beaut. 5 1/2" inches closed, jigged white bone held down by 5 brass pins. Mirror...
Santa Fe started in 1978 so this one would date to that time period due to the Camillus tang stamp. 2" closed, a lobster pattern with a pen and file blade with a money clip on the reverse. Nickel...
Santa Fe began in 1978. I think this one dates to the mid 80's. Look closely at the stone work. This is the knife you will receive. 3" closed. Stones inset appear to be green and blue malachite...
Gutmann Cutlery specialized in copies of other designs and this is one that was originally made in Italy. The blade is conceiled in a stainless handle and can be deployed by one hand. A...
The Sakai brand of knives began in 1958 in Seki Japan and continue today. This model is the backpacker, tab lock, 3 1/4" closed, solid aluminum handles with a rubber insert with the Sakai logo and...
The knife, itself, has a tang stamp that dates it to 1960's to early 70's but Santa Fe started in 1978. Anyway, one side is mother of pearl with jet (stone) inserts. The other side is hard wood....
This one is a large cigar equal end that measures 4 1/4" closed and 1/2" wide! Three nickel pins hold down the plexiglas handles that have old time movie scenes on either side. The tang stamp is...
The Miller Bros. Co. was formed in 1856 in Meridan CT but did not start making knives until 1870. This knife dates to the 1880's. The moose pattern is always a big knife as in this case, a 4 1/4"...
From a mechanic's tool chest, a mirror used to wash up for lunch or to get home looking presentable. Once given away by tool suppliers, this one was from Nicholson Files. looks...
A late 70's knife, a tiny little 'Japan' under the eagle. 5" closed, Hardwood handles, held down with 5 brass pins. Factory tight, solid lock up with thmb ramp. Original price tasg on box...
This is a model 625 Gator Mate, made in Portland USA. 4" closed, The handle is a non slip rubberized polymer with a top blade lock spacer. Half serrated, stenciled 1st Production Run and tang...
This is a pristine mint Lord, model 895 3" closed. Thick gnarly Sambar stag held down by three brass pins. The date code corresponds to 1987. The blade has a long thumb guard...
The model f39 has an upswept blade with long thumb guard. The handle is alternating aluminum and black fiber spacers with an aluminum guard and in this case, an early version with nF39 stamped on...
Paperwork inside is dated 1978 when Ka-Bar was owned by Cole National. Some tarnish on backsprings that will come off with elbow grease.. 3 1/2" closed, slant brass bolsters, Hardwood handle held...
The larger box has some dry water damage at one end otherwise clean with no other damage but two hard to find items, if you have the knives. Instructions are in both boxes with 1964 date codes,...
Marshall Wells was a hardware wholesaler in Michigan and are still in business today. They contrated with all the then knife makers like Schrade, Case, Camillus, Pal for knives to sell in their...
'Rugged'; out on the blade and 127 over 3 on the tang. Pile side reads Seki Japan ATS-36. Very well made and heavy for its size but the solid brass frame accounts for the weight. The steel...
'110' style tang stamped Soliongen West Germany so made before 1990. Sort of heavy due to the solid nickel frame. Lock back, with gold colored inserts on both sides. Absolutely mint. Tight lock up...
Large at 4' closed, the 307 Wrangler is a jumbo storkman's pattern with saw cut Delrin handles, brass liners and pins. Never used, factory edges. Tight with alligator snap on all blades. Pre date...
This is a Seki City Japan made Al Mar. 3 3/8" closed, never used or handled. Mint with a factory edge. Stainless handles, brass liners and a lanyard hole. A traditional pocket knife made in the...
This one appears to be a 1980's knife, made in Seki City Japan. Al passed nearly 30 years ago. 4" closed, reinforced lanyard hole, brass lioners, three stainless steel pins hold down the hard wood...
A large, 4 1/4" closed lockback, looks to be from the early 80's and a colaboration between Whiskers and Linda Karst who did the skrim of a large cat on one side of the horn handle held down by...
This Camco (Camillus) made folder commerates the 60th anniversary of the Lone Ranger series, 1933 - 1993. Absolutely mint, stainless hardware wth aluminum liners and a large bail. Tip bolsters...
This is a pretty, mint Barlow with one long lamb foot blade stamped 'real lamb foot' out on the blade. Tang stamped Whitby Stainless Italy and made in the 70's. Mirror polished blade, never used...
The round shield reads, Handmade Falcon famous Blades. 5" closed with brass pins holding down the horn handles. Locks tight, no wobble. Factory edge, mirror polished. Falcon began in the 70's as a...
A gnarly stag handle, held down with brass pins and at some spots, a 1/4" thick. Button open and close. Mirror polished flat ground blade. s new, tight, no play. Nickel hardware and brass liners....
Tang stamped Mano/Made in W. Germany. West Germany was created after WWII and lasted until the reunification in 1990. Mano made knives in Ohligs/Solingen prior to WWII, this one is not a high end...
This model 112 was produced in 1986 and since it is a 25th anniversary knife, the pins, frame and bolsters are nickel. The wood handles are real Ebony. Absolutely mint. Comes in a Buck Black...
An Uncle Henry folding hunter in mint condition, factory sharp and tight. Comes in its original sheath. The numbers on the front bolster were used to register the knife against theft. Dove tailed...
