All AAPK Member Store Products
Henckels by Boker 4 blade stockman. When Henckels contracted with Boker to make their pocketknives they required a higher degree of fit and finish and premium materials. This stockman...
Item # 72519
$119.50
2008 Great Eastern Tidioute Brimstone Jigged Bone Whittler Pattern # 541308W New in Round GEC Tube Comes with a COA that has been corrected to the right serial # 38 of 50 Nice...
Item # 72497
$325.00
2021 Case XX Bone Stag Stockman Pattern # 6.5318 SS New in Box , Never Carried Original Factory Edge of Stainless Steel Nice Bone Stag Handles with no Chips or...
Item # 72496
$71.99
2022 Case XX Bone Stag Small Coke Bottle Pattern # 6.5225 1/2 SS New in Box , Never Carried Original Factory Edge of Stainless Steel Nice Bone Stag Handles with no Chips...
Item # 72495
$67.99
This is a Henckels, made by Boker, stag canoe. When Boker made knives for Henckels they used premium materials and took the extra steps to insure that these knives were of the highest...
Item # 72487
$154.50
This is gorgeous whittler made by Boker for Henckels. The buffalo horn handles are chip and crack free. The stainless steel blades have not been used or resharpened and retain their...
Item # 72446
$134.50
2 small metal frame Case knives about 3" long. One is a 059L and the other is a 225L for the Swat Rodeo. Both are used and have light scratches. Blades have not been sharpened and lock up fine. I...
Item # 72436
$29.99
From a fellow AAPK members fixed blade collection comes this Bark River Elmax fixed blade. The handles are cocobolo wood with nice lines and tight grain and is chip and crack free....
Item # 72419
$285.00
From a fellow AAPK member's custom fixed blade collection comes this Don Cowles Custom small hunter. The handles are some very striped and red colored curly maple that has been stabilized....
Item # 72406
$588.00
From a fellow AAPK members custom fixed blade collection comes this hunter made by Sidney "Pete" Moon. The handles are desert ironwood and are chip and crack free. The blade is made os...
Item # 72404
$375.00
Queen Cutlery Large 4” Four Blade Congress #32, 1958 – 1960: tang stamp is “Q Steel”, very rare blad
Queen Cutlery Large 4” Four Blade Congress #32, 1958 – 1960: tang stamp is “Q Steel”, very rare blade etch is "STAINLESS STEEL", genuine Winterbottom bone handles...
Item # 72401
$250.00
Queen Cutlery Large 4” Four Blade Congress #32, 1958 – 1960: tang stamp is “Q Steel”, etched blade, genuine Winterbottom bone handles with no chips or cracks,...
Item # 72399
$170.00
Queen Cutlery Large 4” Four Blade Congress #32, 1975 - 1976: rare “Queen “tang stamp, blade etch is “Queen Steel #32”, genuine Winterbottom bone handles with...
Item # 72398
$150.00
1995 Case XX Pattern # 2159L SSP Made for Cycle Exchange Buford Ga. New in Box with Brown Leather Sheath would make a nice EDC Has Factory Edge Locks up Tight , No...
Item # 72372
$65.00
2019 Great Eastern Northfield UN-X-LD Sambar Stag Stockyard Whittler with Punch Pattern # 291319 New in GEC Round Tube , Never Carried Nickel Silver Pinched & Fluted...
Item # 72371
$295.00
2021 Tuna Valley Old Man Norman Mammoth Bark Ivory Barlow 1 of 50 Made New in TV round Tube , Never Carried Nickel Silver Arrowhead Bolsters & pins ,154CM...
Item # 72370
$425.00
From a fellow AAPK members custom knife collection comes this Joe Knipstein custom knife. Joe has been making knives since 1986 and this one is a beauty. The knife is substantial in...
Item # 72360
$385.00
From a fellow AAPK members custom knife collection comes this Larry Page custom. Larry Page has been making knives since 1982. He is a student of George Herron and learned how to make...
Item # 72359
$345.00
Queen Cutlery Co. #44 One Blade Folding Hunter in Winterbottom Bone: 5 1/4” closed; early 1958 - 196
Queen Cutlery Co. #44 One Blade Folding Hunter in Winterbottom Bone: 5 1/4” closed; early 1958 - 1960, Q Steel tang stamp, genuine Winterbottom bone handles with no chips or...
Item # 72355
$225.00
Cesar Maidel out of Brazil, Deer Stag Native, 14C28N steel and 4" closed. He used stag,dome, pins and all stainless hardware. It's slightly heavier than most American builds, but definitely not a...
Item # 72344
$449.99
2019 Case XX Mini Copplock Pattern # 101749L New in Box Never Carried Original Factory Edge Handles of White & Black Carbon Fiber G-10 Basket Weave with...
Item # 72341
$70.00
2001 Case XX Black Bone Pocket Worn Mini Folding Hunter Pattern # TB62165 New in Box , Never carried Original Factory Edge Nice Pocket Worn Old Black Bone...
Item # 72339
$65.00
From a fellow AAPK member's fixed blade collection. This custom knife is made by a custom maker R. Nelson, which I have been told is Roger Nelson. Not sure who this is or where he comes from...
Item # 72328
$297.50
Cesar Maidel out of Brazil, Deer Stag Lanny Clip, 14C28N steel and 4" closed. He used stag,dome, pins and all stainless hardware. It's slightly heavier than most American builds, but definitely...
Item # 72320
$449.99
1995 Case XX Stag Stockman Pattern # 5318 New in Metal Tin, Never Carried Has Factory Original Edge Nickel Silver Bolsters & Case Shield No Wobble...
Item # 72314
$135.00
Jeffrey Mitchell Custom Swayback, Smooth as glass Mammoth Ivory Scales paired with Vegas Stainless Damascus blade with etched Cpm154 spring..Stainless steel bolsters, liners and pins. Little...
Item # 72311
$649.99
Queen Cutlery Large 4” Four Blade Congress, circa 1961: no tang stamp, blade etch is “Queen Steel #32”, genuine Winterbottom bone handles with no chips or cracks,...
Item # 72310
$150.00
From a collection of fixed blade knives collected by a fellow AAPK member comes this Parker Custom Series hunter. Made in the 1980's for Jim Parker by one of Japan's finest craftsman....
Item # 72300
$325.00
Northwoods by GEC Harrison Bay, 14 pattern, 3" closed. Comes dressed in Custom Mammoth Tooth by Don Seals, Mr Knife Guy. Has his Custom filework and he did a great job contouring those...
Item # 72286
$339.99
From a collection of fixed blades knives from a collector comes this Master Ichiro Hattori hunter called the "Dream Hunter" also sometimes called a Chute knife. This model was made in the...
Item # 72280
$345.00
2001 Case XX Yellow Handle Fish Knife Pattern # 320094F SS New in Box , Never Carried Original Factory Edge of Stainless Steel, There is a little Blade rub on Fish Scaler...
Item # 72224
$82.00
From a collector's fixed blade collection comes this A.G. Russell fixed blade. Made in the mid 1990's in Seki Japan by one of the Master knife makers. Most of the Seki made fixed blades were...
Item # 72211
$325.00
This is a Schatt and Morgan swayback whittler made in 1997. The handles are some rich deep blue bone that is chip and crack free. The blades have not been used or resharpened and...
Item # 72169
$174.50
1985 Case XX Lock Back pattern # 21051L SSP New in a Case Box not original Looks to have come off a display board as the front handle is faded Locks up Tight , No Wobble...
Item # 72149
$40.00
2012 Great Eastern Tidioute Lumber Jack Frontier Bone Pattern # 452112LT New in GEC Round Tube , Never Used or Carried Has original Factory Edge of 1095 Carbon Steel...
Item # 72137
$525.00
2018 Great Eastern Elderberry Jigged Bone Dixie Possum Pattern # 828218 New in GEC Round Tube , Never Carried Has original Factory Edge of 1095 Carbon Steel Nice Elderberry...
Item # 72135
$225.00
Vintage Big Custom Made Half Congress knife which is unique and 100% handmade....
Item # 72129
$125.00
2021 Case XX Bone Stag Pattern # 6.5208 New in Box , Never Carried Has Original Factory Edge Nickel Silver Bolsters & Case Shield No Wobble , No Half Stop...
Item # 72122
$78.00
2019 Great Eastern Tortoise Shell Acrylic Pattern # 861219 New in GEC round Tube Factory edge of 1095 Carbon Steel Tortoise Shell Acrylic are Chip & Crack...
Item # 72121
$235.00
2010 Great Eastern Red Stag Model # 235210 EC New in GEC Round Tube . with COA. Has Original Factory edge Great Looking Red Stag Handles with no Chips or...
Item # 72120
$475.00
Schatt and Morgan 042176..Series 8 of File & Wire Tested...Diamond Jigged Bone..Saber ground primary
Schatt and Morgan 042176..Series 8 of File & Wire Tested...Diamond Jigged Bone..Saber ground primary..has a 6 pull on primary, the pull is almost too far back but saber grind gives you better...
Item # 72117
$199.99
061213...comes NIT with gecs coa and has 08 stamped into front bolsters. Ships next day free USPS...
Item # 72116
$269.99
GECS 661312 Calf Roper..Tomato Acrylic..1 of 40 made..NIT..Ships next day free USPS...
Item # 72115
$299.99
Pablo Castellani of Brazil...Large Sheepsfoot Barlow..4" closed but has sweet action...Ebony scales...a must see video on YouTube...https://youtu.be/QOcAOBor3Ds....Ships next day free USPS...
Item # 72036
$579.99
GECS 363122...Blood Red jigged bone..American Cattle Bone is a big deal...Cattle Bone usually sourced from South America because of a local breed with extremely think shin bones, bone come from...
Item # 72020
$239.99
Gecs new release 941121...Clip Jack..Northfield with swedge cut and long pull...ringed bolsters with end caps ..1095... 3.25 closed...new in tube. This one really took the dye well....Blue Camel...
Item # 72019
$229.99
GECs 888222 Bayou Trapper...Serpentine handle covered in Black Linen Micarta at 4" closed...1095 for steel with brass pins and liners.Clip blade has Ace etch and Lambsfoot has PPP. This is...
Item # 72017
$279.99
From my personal collection comes this English whittler by Great Eastern Cutlery Tidioute, pattern 38. This split backspring whittler has Bloodwood handles that are chip and crack free....
Item # 72007
$225.00
The K'ROO custom is a Sleeveboard...steel bolsters ..3.9" closed, comes with a N690 blade and spring and is mill relieved. Pins are ss steel and features Exotic Padauk scales . All steel is...
Item # 72006
$399.99
2019 New in Box Great Eastern Tidioute Burnt Sienna Jigged Bone Stockyard Whittler with Punch Pattern # 291319 one of 273 made Never Carried Has Factory Edge of 1095 Carbon...
Item # 71982
$275.00
2022 Mcusta Elite Series White Corian Liner Lock Model MC-126 D New in Box , Never Carried Original Factory Edge of 33 Layers of Damascus Stainles Steel Core VG-10...
Item # 71981
$208.00
Bill Ruple Standard Sawcut Bone Barlow..Sheepsfoot and pen..3.5 closed..Cpm154..Hall of Fame Inducte
Bill Ruple, founder of the Texas Cartel..newest inductee into Knife Makers Guild Hall of Fame, and amazing builder. Bill has mentored more Makers, good Makers, than anyone I know. This...
Item # 71978
$1,099.99
Tracy LaRock Teardrop Sheep..W2..Black G10.. 2.5" blade and 3 5/8" closed..Hamon..brass liners & pin
Tracy LaRock Custom Teardrop Sheepsfoot... with 2.5" blade and 3 5/8" handle. W2 blade and backspring..wicked hamon. Black G10 scales...with brass liners and pins. This thing is so...
Item # 71975
$419.99
Tracy LaRock Custom Teardrop Clip... with 2.5" blade and 3 5/8" handle. W2 blade and backspring..wicked hamon. Black G10 scales...with brass liners and pins. This thing is so handy...at only...
Item # 71974
$399.99
Smooth natural giraffe bone,A2 blade and backspring, 406 SS pins ,liners,shield and fluted integral bolsters.Acid washed blade, polished stainless, perfect action, flush in all 3.Its 4"...
Item # 71973
$659.99
Michael du Plessis Giraffe Bone Wharnie Trapper...4".. N690..long pull..lanyard tube.fluted bolsters
Michael du Plessis, MDK HIMSELF, Wharnie Trapper...4" closed...has N690 blade and backspring...That's Smooth as glass dyed Giraffe Bone...has a solid 6 pull and 5 pinch,nick is milled and...
Item # 71947
$479.99
2005 Queen Cutlery Collectors Brown Bone Fixed Blade 1 of 50 Made New in Box with Brown Leather Sheath, Never Carried Original Factory Edge Nice Brown...
Item # 71934
$185.00
2011 Great Eastern Tidioute 5th Anniversary Ebony Handle Whaler Pattern # 462211 1 of 33 made in Ebony PPP etched on rear of Pen New in GEC Round Tube , Never...
Item # 71925
$850.00