GEC Tidioute Rams Foot, 933124, natural linen micarta handles, 3 & 7/8 inches closed. Has not been used, carried or sharpened. Good blade snap both ways and a half stop. Shipping in USA...

Case Baby Butterbean, 62132SS, year 2000, pitch black jigged handles. 2 and 3/4 inches closed, has not been used, carried or sharpened. Good blade opening on both and closing on both ends. This...

I bought two of these finger holds at the Atlanta Show. Made them up on Spyderco Openers. I am carrying one and decided to part with one. This is an authentic Spyderco. ...

New with tube Gec 38 special. Good snap, no chips or cracks. Gec quality. Thanks for looking,...

...

Vintage Union Cutlery Co Olean NY Fixed Blade Sheath Knife With Beautiful Jigged Bone Handles In Great Used Condition. Comes With A High Quality Custom Made Leather Sheath. 4 7/8" Blade Looks Like...

Vintage Case XX 1 Dot Li'l Devil P51 Fixed Blade Knife In Excellent Used Condition. Maybe Factory Edge But Blade Has Been Scratched So I Am Going To Say Been Sharpened. Photos Will Show A Tiny...

ONTARIO IS GONE. THE NAVY MARK 3 KNIFE WAS THE ONLY KNIFE THEY MADE FOR THE MILITARY IN STAINLESS. HAVEN'T SEEN IF THIS WILL BE CHINA DUPLICATED. NICE KNIFE DRAINING SHEATH WEB...

GIN 1 BLADE MONARCH THIS IS WHERE BENCHMADE STARTED AMERICAN KNIVES. KNIFE AND SHEATH ARE NEW BOX IS ABIT WEATHERED BUT ORIGINAL WITH PAPERWORK ...

Schrade USA made baby stockman pattern 807UH. This knife was made in 1997 as a submission for the 1998 National Knife Collector’s Association youth knife program yearly knife. This is the...

Bear & Son, made in Alabama. This is the #05 lockback pattern, and measures 3 ¾ inch closed. Jig Red Bone handles, brass liners, nickel silver bolsters, and blank round shield. This...

Keen Kutter brand, made by Bear & Son in Alabama. This is the #05 lockback pattern, and measures 3 ¾ inch closed. Caramel Jig Bone handles, brass liners, nickel silver bolsters, and...

Keen Kutter brand, made by Bear & Son in Alabama. This is the #05 lockback pattern, and measures 3 ¾ inch closed. Caramel Jig Bone handles, brass liners, nickel silver bolsters, and...

Keen Kutter brand, made by Bear & Son in Alabama. This is the #05 lockback pattern, and measures 3 ¾ inch closed. Caramel Jig Bone handles, brass liners, nickel silver bolsters, and...

Equal end pen knife, only marked Solingen Germany. Research suggests these were likely made by Boker approximately around 1990. Measures 3 3/8 inch closed. Spear and pen blades, no liners or...

These A.G.A. Campolin Gun Knives are getting pretty scarce as they were made with only a short run in 2019. This one has a beautiful African Black Ebonywood body. It's a picklock design as you...

Here's an older AKC Italy 13 Incher with a Dagger Blade. The knife has brass liners all the way through the bolsters and this knife functions perfectly, and fires with power and has no peek....

THIS IS A LIMITED EDITION BUCK USA CUSTOM FIXED BLADE KNIFE THIS IS THE BANQUET EDITION KNIFE LIMITED TO 500 THIS IS #26 NEW IN THE WOODEN DISPLAY CASE THE KNIFE BLADE IS CUTOUT WITH...

14cm Omega 1950s picklock. It is non mint but solid and still cool. Chad Rubens fixed the broken lock pin and gave it a spring. The blade has had some sharpening and use with some bend at the tip...

Beautiful Graham Clayton Digby's Kelham Island Mother Of Pearl Folding Knife Sheffield England. Here's an amazing exhibition style folder from English Master knife maker Graham...

Offering a Korean OTF Bell Mfg Secret Agent Super Automatic, 4 3/4" closed, 8" overall, camouflage blues and greens, STAINLESS over ROSTFREI front tang stamp, very minty in factory box....

Here's a very hard to find Hubertus Shellpuller Large Size 11 Knife with 12 and 16 Gauge Shellpullers built into the top bolster. The knife is NIB and works perfectly the way it was designed. The...

These A.G.A. Campolin Gun Knives are getting pretty scarce as they were made with only a short run in 2019. This one has a beautiful African Black Ebonywood body. It's a picklock design as you...

Canal Street Cutlery 4 1/8 Moon Pie Trapper #30. North American Elkhorn stag antler handles. 440c mirror polished blades with custom etch. Handle and blades are in new, unused condition. Blades...

IF YOU LIKE GREAT STAG AND HARD FIRING AUTOS THIS IS FOR YOU...

Rare Spanish copy of a French knife but with the button on the bolster. Very unusual coil spring knife in great working...

Knife measures 9" open length and 4 7/8" closed. Large bayonet blade. Blade doesn't look to have been sharpened or used to cut, though it seems to have had some carbon tracking. Bone scales are...

Here is a vintage Frost Cutlery butterfly knife and am guessing it was made in the 80s or 90s. Knife measures 9 1/8" open and 5 1/8" closed. Scales are a green wood which are in nice shape. Brass...

You don't see slant bolster knives much anymore. Everything works on this...

This knife is new in the box with all the original papers and sheath. It hasn't been sharpened carried used or clean. This is the Hammerhead Shark 2159L SS Lockback knife from 2005. This...

This Knife is very clean for the age. It does come with the original box and paperwork. Checkout all the photos and please ask any...

Offering this used vintage Schrade Old Timer 96OT Bearhead Trapper U.S.A. made double carbon steel blades folding pocket knife. Blades are full and have been polished due to years of...

These A.G.A. Campolin Gun Knives are getting pretty scarce as they were made with only a short run in 2019. This one has a beautiful African Black Ebonywood body. It's a picklock design as you...

Here's a very hard to find Hubertus Shellpuller Large Size 11 Knife with 12 and 16 Gauge Shellpullers built into the top bolster. This is The Big Horn Edition and the handles are done in Rams Horn...

This Large size 11 Hubertus automatic has beautiful Green Micarta handles. The knife works perfectly the way it was designed, and fires with power and has no peek. This one has a Spear-Point blade...

This Large size 11 Hubertus automatic has beautiful Genuine Stag/Antler handles. The knife works perfectly the way it was designed, and fires with power and has no peek. This one has a clip-point...

Offering a NIB European Stag lever action automatic knife from AGA Campolin the "Dominus" means the "Lord". The Maltese cross bolsters are solid nickel silver, 440A SS polished bayonet...

Benchmade 9101SBK Auto Stryker Automatic Knife Next Gen The Benchmade 9101SBK Auto Stryker is a tactical automatic knife built for performance and reliability. Designed with a 3.6"...

An Uncle Henry folding hunter in mint condition, factory sharp and tight. Comes in its original sheath. The numbers on the front bolster were used to register the knife against theft. Dove tailed...

The Camillus tang stamp on this Knife dates it from 1989 -2007. Absolutely mint in every respect. Factory edge, tight and snap. Wide belly master blade, all blades mirror polished. Mirror polished...

3 3/4" closed, steel frame, brass liners and pin. Threaded nickel bolsters, nickel shield. Very tight with loud report, all blades. Sharp rough black handles. Steel bail. Master blade shows very...

From a club member's collection. Imperial bought the rights to the Shapleigh Diamond Edge logo in 1967. This knife dates to that timeframe. 3 3/4" closed, brown fiber handles. Steel pins, bail,...

Remington sold their knife factory to Pal in 1939. This is a militaryu contract multi blade with steel bail, bolsters, liners and pins. The rough black handles show no sign of wear or use at all....

CASE XX COMMEMORATIVE SET 2024 135TH ANNIVERSARY STAINLESS STEEL POCKET END BOLSTERS COAT OF ARMS SHIELD OLIVE GREEN ROGERS JIGGED BONEHANDLES...

Offering an AKC (Automatic Knife Creations) "Classic" Stag model made in Maniago Italy. Opens fast, locks up tight and operates without any issues. See photos for true condition and please...

JEFF PEARCE CUSTOMS PEN KNIFE DAMASTEEL STAINLESS BLADE BLUE MAMMOTH IVORY 410 STAINLESS STEEL LINERS 416 STAINLESS BOLSTERS CLOSED...

New-Dave Yellowhorse knife model # BUBY112HRS, made by Buck, comes in original display case. measures 4 3/8"...

New David Yellowhorse-Grey Eagle.custom model 500 Duke made by Buck, model # 0500YISLE-B, Serial # 42 of 100. Includes wood display case with Certificate of Authenicity. 4 3/8" length...

WINCHESTER TRADEMARK U.S.A. (1919-1942-STOCKMAN-4 INCHES CLOSED-3 BLADES USED MARKED TIGHT AND SNAPS-BRWN PIC BONE HANDLES PRICE GREAT FOR A ORIGINAL WINCHESTER EVEN WITH...

Moore Maker 3202B Trapper, with carbon steel blades and red plastic handles. The is a repaired knife - the shield was replaced. You can watch the repairs on this video:...

Remington R1303 Bullet Knife, made in 2013, unused and uncarried. Single-blade lockback with sawcut bone handles, 3-7/16" in length. Blade locks tight and releases...

New bad azz super nice hi quality Italian style automatic Swinguard switchblade knife , knife measures 9-3/4" inches in open position , Mirror Polished 440 stainless steel razor sharp bayonet...

Here's a rare discontinued 18 incher with a swedgey blade and very rare unusual handles. The handles are a reddish pink (please see pictures). Of coarse the 15 inch and the 18 inch Italians are no...

In 2016 I had 100 of these made by Henning Ritter at the old Hubertus Factory. This is one of my few remaining ones out of my personal collection. The knife works perfectly and fires with great...

WILLEM STEENKAMP CUSTOMS GREEN CANVAS MICARTA HANDLES X CUT MICARTA BOLSTER M390 STEEL CLOSED LENGTH - 3 3/4" OVERALL - 6 7/8"...

This Korizzy works great but is missing the safety cap rendering the safety...

I got this 12cm from Apple Valley but trying to downsize my collection and it needs to go. My rule is no more than 100 knives and I have 163 still. I paid 140 or 145 from Mark before...

not sure why these don't command a premium but the are great knives with the wasp body shape, steel liners, and downturned bolster ears but they are. That means swoop them up before they go...

Brand new Godson in amber jigged bone. These were...

Brand new amber jigged bone Godfather in perfect...