Vincenzo Balistreri customs 3.5" closed original Little Bad Boy Taillock pattern dressed in Horse Hoof scales, like glass, and stunning anodized titanium bolsters with filework spring, comes with...

Mammoth ivory scales , smooth as glass,CPM-154 blade and backspring, 406 SS pins ,liners,shield and ringed/fluted bolsters. Hand rubbed and finished, perfect action, flush in all 3,...

The DrT, David Taber, custom is a Outsider pattern,he couldn't make up his mind , has antique Westinghouse micarta and he used the last of the Corvettite for shield and bolsters, sporting a...

Birdvis Spear Hitchcock Prototype, see pics. One of one, he never made another, he said getting a curve in the spear spine was a job. He put the specs in for the regular Hitchcock in...

Thys Meades, another South African maker,perhaps the most sought after maker today, mini Dino, this is an ultra light has G10 liners.Micarta scales ,OD Vintage Westinghouse with Westinghouse...

MDK Native slipjoint with Camel Thorn scales and Ivory Bolsters and shield, The shield is inlaid and double pinned. Check out his hollow grinds, all hand rubbed satin finish. Closed is 3.75" and...

The DrT, David Taber, custom is a Dino pattern, Ironwood scales with full checkered look, he sends them out to a friend,and sporting a CPM-154 blade. Other steel is 406. 3.625" closed has CRoc...

The Jhloyd custom is a full size 4.25", "Viper", Sway Back original TB pattern, comes with a 52100 Wharncliffe blade and back spring, The pins, liners, and bolsters all stainless steel, it's mill...

This Phil Jacob Natural Micarta Sway Back is simply fantastic. At 2.8ozs and 4" closed it's a great example of the master craftsmans work. Buttery smooth action each piece welds itself into a...

The DrT, David Taber, custom is a Dino pattern, Fordite, from the Corvette factory in Kentucky where it was sourced after it closed , it ran vettes from 58 to 72, scales with Damascus blade ,and...

The DrT, David Taber, custom is a Dino pattern, micarta covers with G-10 bolsters and liners, sporting a special extended transitional shield. Blade and backspring are ATS-34 other steel is 406....

Timoteo Native slipjoint with Umbria exotic wood scales and 1070 carbon steel, for you guys looking for a patina here it is. Check out his hollow grinds, all hand rubbed satin finish. Closed is 4"...

Dean Robertson customs Dino pattern slipjoint knife. 3 5/8" closed, comes with an 01 tool steel blade and backspring with 406 SS pins,liners and Ivory Deer Trophy shield, very top shelf, and this...

Vincenzo Balistreri customs 4" closed original Native Taillock pattern dressed in Contrasting micaeta, comes with a RWL-34 blade and ackspring with 406 SS pins,liners and shield. It is mill...

The K'ROO custom is a Gunstock with a clip blade,covered in Ironwood Burl ,3.75" closed, comes with a N690 blade and N690 back spring. Pins 4 of em,frame and shield are SS. Has a 4 pull, half stop...

A Bobby Toole custom dressed in natural Micarta and steel bolsters Hollow ground and Swedge cut Clip with nail nick. CPM-154 blade and backspring, 406 SS pins ,liners,shield and steel bolsters. 4...

Dean Robertson customs,original SWay back pattern, knife. 3.75" closed, comes with an cpm-154 steel blade and backspring with 406 SS pins,liners and double Crappie,Fish, shield. It is mill...

Kroo Native slipjoint with Denim Micarta scales and Hippo Ivory Bolsters and shield, the Hippo gives a whiter and almost translucent polished finish. The shield is inlaid and double pinned, as are...

Pepe Jalomo Native slipjoint with exotic Coconut Shred scales, made in compression chamber like micarta, CPM-154 blade and backspring. Check out his hollow grinds, all hand rubbed satin finish....

Cosimo custom is another Italian master and is spot on, the "Viper", Sway Back pattern, 4" closed, comes with a Rwl34 Wharncliffe blade, hollow ground, 416 back spring,pins, liners, and bolsters...

Vincenzo Balistreri customs 4" closed original Zulu pattern dressed in TRUE ELEPHANT IVORY, that federal shield is true turtle shell not acrylic, he's just full of surprises, comes...

The Enrique Pena custom is a mini Zulu pattern, 3.625" closed, comes with a heavy swedge cut Spear point blade, mill relieved ss pivot, frame and pins are steel,the blade is Cpm-154 Stainless...

The Birdvis custom is a Dino pattern, 3.75" closed, comes with a heavy swedge cut Dino blade, mill relieved ss pivot, frame and pins are steel,the blade is Cpm-154 Stainless steel and features...

3.5" Mini Lannys Clip, Same style same maker same materials as the lambsfoot recently sold. Mammoth ivory scales , smooth as glass,CPM-154 blade and backspring, 406 SS pins ,liners,shield...

The Birdvis custom is his modern pattern Hitchcock.3 3/8" closed, comes with a Reverse tanto blade, mill relieved ss pivot, frame and pins are steel, has a Cross cut micarta pivot collar and No...

The Steenkamp Dino has Cocobolo scales, a stainless shield black Micarta Bolsters and N690 blade and backspring, stainless steel frame and pins.4" closed. Great action, smooth 6 pull, pinch...

This is a new custom knife by John Lloyd. 4" closed and set on a Barlow/Jack style handle, Chamberfered, with a Wharncliffe point blade in 52100 carbon steel and hollow ground. Blade measures 3"...

Sacred bear, Tony Utt, custom Native pattern slipjoint knife. 4 1/8" closed, comes with a CPM-154 steel blade, , modified Spear, has a stone washed finish. Sports tangerine G-carta scales with...

The Steenkamp custom is a modern Barlow pattern, 3.65" closed, comes with a heavy Spear point blade,liners and pins are steel,the blade is Cpm-154 Stainless steel and features Thunderstorm Kevlar...

The K'ROO custom is a K'roo take on the "Viper", Sway Back pattern, 3.93" closed, comes with a N690 Scagel cut Wharncliffe blade and back spring,pins, liners, and elonated bolsters all steel and...

Broadway Jack, 3 1/2" closed based on the 15, the only wharnie 15 made, post production sold as straggler without easy open, 1 of 6 made.Last year gec used this material was 2016,this...