This is a vintage HSRRY MORSETH from CLINTON WASHINGTON hand crafted knife.the handle is (3' pc stag. The blade measures5 inches long fron fave on. N/..

This is a Randall Made Knives badge and challenge coin from 2013 marking their 75th Anniversary. The set was not made by the Randall Shop but authoriz..

Burr Oak Knives, Custom bold feather pattern damascus with Wrought Iron guard, carbon fiber and oak handle. 5" blade, 9.5" overall length. The sheath ..

This is a Boyd & Fireman San Francisco Classic Custom Push Dagger. It is their rendering of the classic push dagger popular during the San Francisco G..

Over 13 3/8" Prioletta Style Custom Knife by Samir Ahmad in Pakastan.Birds eye damascus over 6 /38" blade this knife is no joke . Custom order. He sel..

Over 13 3/8" with a polished Damascus blade and a Stag handle.This custom knife is designed to look similar to the Spanish Hellraiser Swing guard.Etch..

Over 13 3/8" Prioletta Style Custom Knife by Samir Ahmad in Pakastan.Birds eye damascus over 6 /38" blade this knife is no joke . Custom order. He sel..

Never used, carried or sharpened. 9.5" blade. No box ..

Never used, carried or sharpened. 11" blade. No box ..

Custom 11 inch picklock using parts stamped Stiletto Italy. Nickle silver skull crusher bolsters with inlaid brass guards. Book matched Cocobolo coffi..

Nice rare vintage 16 1/2 inch balisong balisword. In very good shape and almost impossible to find now especially with the eagle head...

Nice rare vintage 32 1/4 inch balisong balisword. In very good shape and almost impossible to find now especially with the eagle head...

Custom Shark with a dual finish on the blade. Bead blasted and satin. Also with a satin finish on the bolsters. Everything works as it should. Nice kn..

Nice 10 inch custom ECC gravity with a 6061 cold rolled aluminum frame,brass liners,brass bolsters,and steel trigger. All made and satin finished by h..

Custom Strider Knife in new and unusused condition.  Never sharpened or carried.  This knife is so smooth and well made.  See pics.  ..

Kroo Sheepsfoot Barlow, sheepsfoot blade with long pull and high hollow ground....traditional build with elongated fluted bolsters ..3.75" closed with..

Custom Shark with a dual finish on the blade. Bead blasted and satin. Also with a satin finish on the bolsters. Everything works as it should. Nice kn..

The K'ROO custom is a Slimline Wharnie Trapper 4" closed, comes with a Rose pattern  laser polished Damasteel blade and spring... Pins all ss steel, b..

Kroo Slimline Wharnie, Hawthorne Jack..traditional build with fluted bolsters and end caps..4" closed with Rwl34 blade and spring, BeanBag Micarta wit..

Large custom Jolly by Rubens Blades. Measures a little over 11 1/2 inches long overall. Custom G-10 handles with a new skull badge. It has been fine t..

     This old, slip-joint, lockback beauty by Dave Ricke(deceased) of West Bend, Wisconsin is approximately 4 5/8" long when closed.  The absolutely g..

7 inch picklock parts kit as shown. Each kit has been fitted and tested to ensure proper fit and function. Build it yourself or have your favorite kni..

This is a large Coke Bottle style custom Folding Hunter by deceased maker J Peterson of Renton, WA (the maker passed away in 1980). The knife is 5 3/4..

Peter Crowl Damascus Fixed Blade Knife Journeyman Smith. Peter is located in Indiana and is a journeyman bladesmith. Solid work. Spalted maple handle ..

I have for sale a this Chris Reeves small sebenza 21 CGG Lunar landing knife. This is a 50th anniversay commerative of the first man to walk on the mo..

Custom Shark with a dual finish on the blade. Bead blasted and satin. Also with a satin finish on the bolsters. Everything works as it should. Nice kn..

Custom 9 inch picklock using parts from a frank b 2.0. New round spring that will never break. Nickle silver bolsters,grey/silver kirinite,and a skull..

Custom Shark with a dual finish on the blade. Bead blasted and satin. Also with a satin finish on the bolsters. Everything works as it should. Nice kn..

My packable small game gambrel is only 10" wide and weighs less than 4 oz. a perfect piece of equipment to have in your pack or hunting pouch. Comes w..

Custom Shark with a dual finish on the blade. Bead blasted and satin. Also with a satin finish on the bolsters. Everything works as it should. Nice kn..

Custom Shark with a dual finish on the blade. Bead blasted and satin. Also with a satin finish on the bolsters. Everything works as it should. Nice kn..

MINT DAVID YELLOWHORSE ANASAZI 3 BLADE TRAPPER c1998 CHECK OR MONEY ORDER , 4 1/8"  CLOSED LENGTH , BEAUTIFUL HANDLES  HANDLES WITH ANASAZI SHIELD  , ..

T. J. Sheehy Juneau Alaska hunting knife made in the style of Seguine of Juneau. 10 1/4” overall with a 5” blade. Doesn’t show much use if any but the..

Considering the age and how rough these knives can be,this one is in good shape. It fires nice and has good lockup. Measures a little over 14 inches l..

FRONTIER ARMY BOOK-HARD COVER-271 PAGES   **GOOD READING OF EARLY FRONTIER**  SOMEONE MIGHT ENJOY. CHEAP AS GIVEAWAY..

Custom 10 1/4 Russian Prison Knife. This one was pre owned so it does have some scratches on the blade. But it also the only one I have seen with kiri..

Nice custom 13 inch picklock using part Stamped Maniago Italy. Full custom hand made liners,handmade brass skull crusher style bolsters with a satin, ..

Custom B&T Aluminum Ring Lock Knife - No Cracks - Operates as designed - No Wobble - Unused Condition - No Box - Approx. 5 inches closed - 8 3/8 inche..

This one just pushes the limits of of everything with this crazy design. 12 1/2 inch custom gravity with a 6061 cold rolled aluminum frame,brass liner..

Kroo Sleeveboard, used the Fremont specs with long pull..traditional build with bolsters and end caps..3.75" closed with Rwl34 blade and spring, Wart..

Birdvis Hitchcock...Red Canvas Micarta...Cpm154...3 5/8" closed...he jeweled the spring inside liners..Dob is 04/22/2022...never used...carried or sha..

1of a kind....Tinus Stone Gunstock. Desert Tan G10 with Orange liners and Hamon Etch.   Perfect blade centering. Pinch to open with 6 pull and strong ..

This one just pushes the limits of of everything with this crazy design. 10 1/4 inch custom ECC gravity with a 6061 cold rolled aluminum frame,brass l..

Custom 13 inch picklock using the spine and blade part marked Maniago Italy. Hand made full liners,and hand made brass bolsters. Book matched stag han..

Martin Prudente is a Florida maker well known to us Florida residents for making strong, hunting and tactical knives. This drop point hunter has a 3 1..

Scandinavian PUUKKO Hunting Knife with a onepiece ivory (marine, we believe) handle and sheath. Both the handle and sheath have a great patina finish ..

As new from maker Joe Calton Oklahoma custom maker, Small Game knife, 01 tool steel blade, 1/8" thick with full convex grind, Handle Curly Balbinga wi..

True custom...FIRST MAGNACUT made,MAGNACUT is more expensive and adds a little to cost...special modified Wharnie blade...African Blackwood with great..

Vintage unknown maker custom Hunting Knife with a great old Ivory (one piece) handle. 4 1/8" blade - 8 7/8" overall length. The handle is nicely patin..

Authentic Merriken custom knife .  Has one small scratch that can be seen in the pics.  Old script Merriken markings inside the knife.  ..

Antique French CHAMPAGNE wire cutter KNIFE with 2 3/4" blade stamped: SEVERIN A EPERNAY. The VERY tip of the blade is chipped off. Ivory handle and ni..

Custom 11 inch picklock with hand carved nickel silver bolsters,a skull emblem and Osage Orange wood. It fires nice,sits straight,has solid lockup and..

INCOMING from Bobby Toole..these are Bobby's pics.....shipped today...should have it in my hand Wednesday latest. Textured Bark Mammoth Scales...Cpm15..

Amazing Condition ,Fr Herder ( Germany) Bayonet Blank , ( Restoration or Customized Project . Mint . In the Best condition available today !! 8 inch e..

Nice custom 10 1/2 inch gravity. Aluminum frame,brass release,brass bolster,brass liners with kind of a spacey pattern on the backside. 3 different fi..

Neat vintage Custom made Hunting Knife with ELK Hoof Prints as the Maker's Stamp (Mark). Nice looking knife with patinaed smooth bone handle scales, e..

Custom Campolin Baron with Kirinite handles and a skull emblem. It has also been tweaked to sit deeper when closed,and fire faster...

Not sure how old these are,the patina makes me think quite a few decades at least. They measure a little under 4 inches across at the bottom,and about..

Custom 7 inch picklock with hand carved nickle silver bolsters,kirinite handles,and lots of filework. This is the only knife that both Rubens Blades a..

Custom 9 inch picklock using parts stamped Made In Italy. Solid hand carved nickel silver bolsters,Jungle camo kirinite,a raven skull emblem,and som v..