Here's a very hard to find Hubertus Shellpuller Large Size 11 Knife with 12 and 16 Gauge Shellpullers built into the top bolster. This is The Big Horn Edition and the handles are done in Rams Horn...

This Large size 11 Hubertus automatic has beautiful Green Micarta handles. The knife works perfectly the way it was designed, and fires with power and has no peek. This one has a Spear-Point blade...

This Large size 11 Hubertus automatic has beautiful Genuine Stag/Antler handles. The knife works perfectly the way it was designed, and fires with power and has no peek. This one has a clip-point...

Older mini novelty keychain out the front switchblade. Overall open length is approx. 5", blade is approx. 2". Blade is stamped "STAINLESS CHINA" on the tang. Inexpensive Asian keychain otf but no...

Benchmade 9101SBK Auto Stryker Automatic Knife Next Gen The Benchmade 9101SBK Auto Stryker is a tactical automatic knife built for performance and reliability. Designed with a 3.6"...

This model 112 was produced in 1986 and since it is a 25th anniversary knife, the pins, frame and bolsters are nickel. The wood handles are real Ebony. Absolutely mint. Comes in a Buck Black...

An Uncle Henry folding hunter in mint condition, factory sharp and tight. Comes in its original sheath. The numbers on the front bolster were used to register the knife against theft. Dove tailed...

The Camillus tang stamp on this Knife dates it from 1989 -2007. Absolutely mint in every respect. Factory edge, tight and snap. Wide belly master blade, all blades mirror polished. Mirror polished...

This is a spactacular knife for several reasons. Utica went to the Kutmaster tang stamp in 1937. This one dates to the 50's. Jigged brown Delrin handles. held down by three brass pins. All blades...

3 3/4" closed, steel frame, brass liners and pin. Threaded nickel bolsters, nickel shield. Very tight with loud report, all blades. Sharp rough black handles. Steel bail. Master blade shows very...

From a club member's collection. Imperial bought the rights to the Shapleigh Diamond Edge logo in 1967. This knife dates to that timeframe. 3 3/4" closed, brown fiber handles. Steel pins, bail,...

Remington sold their knife factory to Pal in 1939. This is a militaryu contract multi blade with steel bail, bolsters, liners and pins. The rough black handles show no sign of wear or use at all....

CASE XX COMMEMORATIVE SET 2024 135TH ANNIVERSARY STAINLESS STEEL POCKET END BOLSTERS COAT OF ARMS SHIELD OLIVE GREEN ROGERS JIGGED BONEHANDLES...

New Brian Yellowhorse knife model #YH166 made by Queen. #25 of 50. Includes the original display...

JEFF PEARCE CUSTOMS PEN KNIFE DAMASTEEL STAINLESS BLADE BLUE MAMMOTH IVORY 410 STAINLESS STEEL LINERS 416 STAINLESS BOLSTERS CLOSED...

JEFF PEARCE CUSTOMS SMALL ZULU CARBON DAMASCUS BLADE WORLD WAR II RAG MICARTA 410 STAINLESS STEEL LINERS CLOSED LENGTH - 3 1/16"...

New-Dave Yellowhorse knife model # BUBY112HRS, made by Buck, comes in original display case. measures 4 3/8"...

New David Yellowhorse-Grey Eagle.custom model 500 Duke made by Buck, model # 0500YISLE-B, Serial # 42 of 100. Includes wood display case with Certificate of Authenicity. 4 3/8" length...

WINCHESTER TRADEMARK U.S.A. (1919-1942-STOCKMAN-4 INCHES CLOSED-3 BLADES USED MARKED TIGHT AND SNAPS-BRWN PIC BONE HANDLES PRICE GREAT FOR A ORIGINAL WINCHESTER EVEN WITH...

New bad azz super nice hi quality Italian style automatic Swinguard switchblade knife , knife measures 9-3/4" inches in open position , Mirror Polished 440 stainless steel razor sharp bayonet...

Here's a rare discontinued 18 incher with a swedgey blade and very rare unusual handles. The handles are a reddish pink (please see pictures). Of coarse the 15 inch and the 18 inch Italians are no...

In 2016 I had 100 of these made by Henning Ritter at the old Hubertus Factory. This is one of my few remaining ones out of my personal collection. The knife works perfectly and fires with great...

WILLEM STEENKAMP CUSTOMS BARLOW PATTERN SPEAR BLADE RED BUSH WILLOW HANDLES BLACK MICARTA MICARTA BOLSTER M390 STEEL CLOSED LENGTH -...

WILLEM STEENKAMP CUSTOMS GREEN CANVAS MICARTA HANDLES X CUT MICARTA BOLSTER M390 STEEL CLOSED LENGTH - 3 3/4" OVERALL - 6 7/8"...

Rare vintage 1940's 11" Italian flat guard picklock stiletto. Brass lined with nickel silver bolsters. Some of the most unique genuine cow horn scales I have seen - one crack - can be left as is...

Vintage 11" 1970's Italian stiletto. Standard flat ground blade is stamped "B Rostfrei" (Beltrame) on the front tang. Genuine Rosewood scales. Blade fires strong. Everything functionsn as...

Vintage "MADE IN ITALY" 1960s/70s small 6" manual opening Italian STILETTO lockback folder. Vintage made in Italy very small lock back Stiletto . Blade with nail nick is stamped " MADE IN ITALY "...

Brand new super cool 8"SLS Knife, (Swinguard Leverlock Stiletto) automatic switchblade knife , 8 inches in open position , polished stainless steel bolsters- lever -liners and guards ,...

A 100th anniversary item, a USA made Buck 310 whittler in a wooden box marked 100 years Buck 1902-2002. Coping blade has the Idaho outline. Outer box and included paperwork included. Mint. never...

Vintage Italian single action trap door OTF knife. Real nice genuine horn. Stamped in a triangle on the front tang "PATENT ROSTFREI". Overall opened length is 8 1/4". Everything...

Nice old NATO MILITARY OTF knive. Works just as it should. Blade is unsharpened sporting its factory edge and never used to cut anything. Doesn't wobble when opened. Camo paint is nice. Little...

Made in France by the G. David co. in Thiers since 1810. This knife dates to the 70's. 4 1/2" closed. Very tight pull and a loud snap both ways. Brass bolsters, liners and pins. The Arbalette...

Camillus 4 line, 30's - 40's with alligator rough black handles. Never really used most mint luster still on blade. Large hook bail, steel pins, liners and bolster. Locks up loud, soft...

This Buck sharpening tool was made in the USA from 1973 to 1980. The handle acts as a sheath when you flip th elever, the sharpening steel comes out. I don't see any use. No dents or damage of any...

Master blade seems to be the only blade used. No damage, dings of any kind. Hard pull, very tight and great snap both ways, pre date code. Tang stamp reads Buck 303 USA. Slant nickel bolsters,...

GEC 363122 Blood Red Jigged Bone. New in the Tube with Collectors...

This one's a beauty. Mirror polished blades with inscription on master blade.. Pile side sytamped HK-16-S Hand forged stainless. Brass liners, nickel bolsters and pins that hold dow the stag....

First things first, the tang stamp looks like "Latana" to me, not Latama, but also says Made in Italy. Not having much experience with this knife type I have no idea if that's the way it's...

New Colonel Coon knife in box, item# CC66BC. Purchased new in...

New Colonel Coon knife in box, item # CC48. Purchased new in...

New Colonel Coon in box, item # CC65. Purchased new in...

A new in box Colonel Coon knife, showing item # CC41. Purchased new in...

Puma brand, made in Germany in 2000. This is a 2 blade Stockman pattern, measuring 3 7/16 inch closed. Jigged brown bone handles. Brass Puma shield, brass liners, stainless blades, and nickel...

Camillus TL29 linerlock barehead Electricians Knife, made in New York. Dated approximately to the 1960s. Measures 3 ¾ inch closed, not including the bail. Spear and screwdriver /...

Kutmaster TL29 linerlock barehead Electricians Knife, made in Utica, New York. Measures 3 ¾ inch closed, not including the bail. Spear and screwdriver / wirestripper blade, which has...

Custom made Ulu Skinner. Maker is Lee Polk of Indiana. Measures 3 7/8 inch wide and 3 7/8 inch tall. Colored laminate wood handles, white spacer, and high carbon forged blade. Maker stamp...

Custom made Ulu Skinner. Maker is Lee Polk of Indiana. Measures 3 7/8 inch wide and 3 7/8 inch tall. Colored laminate wood handles, orange spacer, and high carbon forged blade. Maker stamp...

PAL Cutlery made RH 36 sheath knife. Using the old Remington hunting knife pattern, these were also used during WW2 as combat knives for the troops. Approximate date range is 1941-1949....

3 piece cutlery set with knife, fork, and spoon made by George Schrade Cutlery of Bridgeport, Connecticut for the Girl Scouts. Approximate date range is 1940-1965. All 3 pieces are stainless...

Here's a pretty scarce Hubertus Knife from the old Ritter Factory in Solingen, Germany. This is a large size 12 Slimline with yellow micarta handles and original factory edge. This knife has a...

Benchmade 3551 Stimulus Push Button Automatic Knife With Integrated Safety. Discontinued. New In Box. Never Used or Carried. Factory Edge Still Intact. Approx. 3" Satin Finish Drop Point...

New in original box Benchmade 32 Morpho, exactly as pictured. Moebalisong on Instagram Moerarities on...

New in tube with oil paper. Photos are of the actual knife up for your consideration. Never carried, never sharpened, no cracks, no spots, no rubs, no wobble, blade is perfectly centered and has...

New in tube with oil paper. Photos are of the actual knife up for your consideration. Never carried, never sharpened, no cracks, no spots, no rubs, no wobble and blade has Good snap. 3 7/8"...

New in tube. Knife in photos is the knife you will receive. Never carried, never sharpened, no cracks, no rubs, no wobble, blade has good snap opening and closing. 3" closed. Satin Finish 1095...

New very impressive OTF (out the front) ejected automatic switchblade knife ,one of the most impressive otf knives ive ever seen and ive seen a bunch , no movement of blade in open position which...

New very impressive OTF (out the front) ejected automatic switchblade knife ,one of the most impressive OTF knives ive ever seen and ive seen a bunch over the years , no movement of blade in open...

If you need info on this or any of my listings, please email me with questions or for additional photos. mc5 TOTAL NUMBER OF KNIVES :...

This is a heavy duty two blade trapper from Marbles. Knife is handled in beautiful amber carved stag bone (ACSB). Knife measures 4 1/2 inches closed. Both blades feature eyelash...

Here's an older Shellpuller Knife from the old Ritter Factory. This is like the knife they used in the Johnny Cade Movie. This knife has never been used and of coarse retains its original...