From a recent 44 piece Robeson by Queen collection purchased from a fellow AAPK member. This is a Mastercraft Congress made with some very nice green almost a tractor green bone that is chip...

This is a Union Cut Co elephant toe made in 1986, I believe for the Ka-Bar Collector's Club, but I could be wrong about that. The handles are rugged and deep jigged brown bone that is chip...

Northwoods Fall Creek fixed blade manufactured by Great Eastern Cutlery. This knife comes with a Wharncliffe blade stamped with the Northwoods logo and is wrapped in Carbon Fiber scales. OAL is 5...

Great Eastern Cutlery Northfield #56 Easy Open Dogleg Jack in Che Chen Rosewood. This knife has a single Spear Point blade with longpull constructed of 1095 High Carbon Steel and comes with an...

This is a 1975 CASE XX 6250 pattern knife. Collectors have referred to this knife as a "Sunfish" or "Elephant Toe". The overall length of the knife when it is closed is 4 3/8". It...

knife carry loop replacement parts, like those used on many scout knives X 12 various...

Vintage GunStock Pocket Knife with Pretty Mother of Pearl Handles. I believe this beauty was made for...

AS NEW NEVER CARRIED OR SHARPENED WITH NO BOX 2010 Case 6318 Appalosa bone with no cracks or chips, and deer tracks etched on both side, with Case crosshair shield. all three blades as new...

1997 Case Trapper 6254 carried never sharpened, with SS blades with no wobble, The brown bone handles are chip and crack free, snap is as factory new, nickel bolsters with brass liners and pins....

Case 9-1/8 1940-1965 Stag hunting knife This knife isn’t new, or never carried and ever re-sharpened. How ever it is a good specimen of and early hunting knife with some out...

Vintage Bulldog Brand Stockman w/ S&D Enterprises Blade Etch & Stag Handles. Good open...

Remington Rh 46 Sheath Knife This knife looks as new, hardly carried if ever. The blade is 6-1/4” point to butt. 10-3/4 inch overall length. It’s...

Summer Sale----Brand New Limited Edition Brazilian Horn Model leverlock automatic Switchblade knife made by Otter-Messer Hubertus company of Solingen Germany ,same great hi-quality as in the past...

Brand New Limited Edition Brazilian Horn Model leverlock automatic Switchblade knife made by Otter-Messer Hubertus company of Solingen Germany ,same great hi-quality as in the past 100 years...

-This is a brand new Shell-Puller model made in small quanity in Solingen Germany. This model was made famous by Johnny Cade played by Ralph Macchio in the movie "The Outsiders" this is same model...

Brand New Limited Edition Brazilian Horn Model leverlock automatic Switchblade knife made by Otter-Messer Hubertus company of Solingen Germany ,same great hi-quality as in the past 100 years...

Remington Rh 51 Sheath Knife This knife looks very nice. The blade is 7-3/4” point to butt. Its got the circle Remington DuPont made in...

Remington Rh 35 Sheath Knife This knife looks very nice. The blade is 9-1/4” point to butt. Its got the circle...

Remington Rh 32 Sheath Knife This knife looks very nice. The blade is 8-3/4” point to butt. It’s got the circle...

1980 , 10 dot Case XX boot knife , 4 1/2" blade and 8 1/2" overall. Blade double edge with a couple light scratches at the tip. P62-4 1/2 SS. Wood handles with some light scratches on the guard....

A nice Remington UMC RH-34 , 5" blade , 9 3/8" overall, Blade has some scratches, leather handles with black, red and blue fiber washers and brass washers.Pommell with light dings and scratches.Kn...

Remington UMC RH-36 , 6 1/4" blade and 10 1/2" long overall. Blade has scratches , stains and light pitting.leather handle with black and red fiber washers, has some dings and dents in leather...

Super Knife Dual Action Switchblade, Original Box, Unused #2. Interesting knife that opens manually with the thumb stud or automatically with the hidden button. It has a backlock to release the...

Super Knife Dual Action Switchblade, Original Box, Unused #1. Interesting knife that opens manually with the thumb stud or automatically with the hidden button. It has a backlock to release the...

Wendell Carson started making knives in 1998 and sourced his knife parts from various manufacturers, mostly from Queen. Mr Carson used unique handle materials and hand finished each knife to...

This is a Paragon folding hunter designed by Blackie Collins. Made in Seki Japan by some of Japan's finest craftsmen. The handles are some very nice cocobolo and are chip and crack...

Vintage Camillus, New York (Heavy Duty great made knife, not cheap novilty) 2 Blade Large Cigar Knife (CM8009) with Riders of...

2015 NEW NO BOX Case XX xmas trapper 10254ss never carried or sharpened. Stardust handles no chips or cracks, blades with factory edges with no wobbles. Nickel bolsters and brass liners and...

As New never carried or sharpened 2017 Case XX medium congress 64052ss with lightly jigged red bone, with no chips or cracks, all four blades have factory edges with factory new function. Nickel...

Vintage 1980's balisong from Valor Corporation. This is a great flipper / practice knife with tons of hours left in it! Good condition - Knife shows normal wear for the...

As nice as you can find, Case XX 1940-64 6214 Swell Jack with Red bone scales, carbon blades, 6214 was discontinued June 1 1975, This one is XX era and is as nice you will find. Red bone jigged...

3/4" closed knife. The blade full, stamped (Logo/QSP) The backside (S35VN), Handles are G10, bolster is carbon fiber. Has belt clip. Believe this one has been...

pouch for folding knives leather, about 4 1/2in total length and 2 in wide less than 1in deep, made in...

Case XX 1970 6235-1/2 red bone knife as new never carried, cleaned or sharpened. stunning as nice as you can find. Swell end Jack knife, Nickel bolsters are perfect with both carbon blades are...

Used Buck Knife pouch probably fits the...

pile of mismatched and some used knife scales few feel like wood to me but think there are some smooth bones, one box is all Case...

this is a pile of the ugly or chipped scales some I believe are bone others are some...

4 x 1 in jigged possibly bone...

smooth precut bone (?) 3in X just over 1/2 wide with sloped edge take all 4, 2 have small...

2 5/8in precut scales near 1/2in wide think its bone but could be some...

4in X 3/4in jigged scales about 1/12th inch thick with sloping sides possibly composite like micarta but not delrin could be...

2 3/4in X 1/2in at top and 3/4in at bottom, about 1/12th in with sloped edges jigged bone (?)...

Knife making parts, found in plastic bags that were very old and tearing sold in bulk for barehead 8x scales jigged dark brown black probably micarta 8x brass liners 4x...

THE "DOMINUS" 9" IS A NEW SWITCHBLADE MADE BY A.G.A. CAMPOLIN FROM MANIAGO ITALY. IT HAS BEAUTIFUL EXOTIC AFRICAN EBONY WOOD HANDLES WITH NICKEL SILVER BOLSTERS, A MALTESE CROSS...

Vintage Hand Made Bulldog Brand Trapper w/ Great Stag Handles -NOS. Good open and close snap...

Bulldog Brand "Cattle King" Large Stockman Knife w/ Fantastic Mother of Pearl Handles -NOS and M/NM....

11inch Frank Beltrame swivel bolster with stunning abalone shell. Fires nice and strong....

From a recent 44 piece Robeson by Queen collection purchased from a fellow AAPK member. This is an RCC Grand Dad Barlow demonstrator made in 2003 with only 100 of these made. The...

From a recent 44 piece Robeson by Queen collection purchased from a fellow AAPK member. This is a Robeson Shuredge Coke bottle hunter made with smooth strawberry red bone that is chip and...

This is a beautiful, custom, hand made 12" switchblade. It features beautiful black and white buffalo horn handles with engraved stainless steel bolster and center band. There is very nice...

New A.G.A.Campolin 6” Dominus leverlock knife is small and fits in every pocket. This Automatic Switchblade features a 440A stainless steel blade and the handle is made of Beautiful...

Here's a very hard to find Hubertus Shellpuller Large Size 11 Knife with 12 and 16 Gauge Shellpullers built into the top bolster. The knife is NIB and works perfectly the way it was designed. The...

Vintage Bulldog Brand (BKC# 44) Stockman with “Quarter Horseman” Blade Etch w/...

Miniature Keychain Switchblade Knife, Taiwan, 2.75 Inch Fishtail Style, Unused. Here's an interesting mini switchblade with harder to find, white & blue swirl handle scales. The...

Miniature Keychain Switchblade Knife, Taiwan, 2.75 Inch Fishtail Style, Unused. Here's an interesting mini switchblade in great shape with harder to find, white & blue swirl handle...

Miniature Keychain Switchblade Knife, Taiwan, 2.75 Inch Fishtail Style, Unused.Here's an interesting mini switchblade in great shape. I've seen many variations of this model however this is...

Miniature Keychain Switchblade Knife, Taiwan, 2.75 Inch Fishtail Style, Unused.Here's an interesting mini switchblade in great shape. I've seen many variations of this model however this is...

Actual knife you will receive. Never carried, never sharpened, no cracks, no wobble, both blades have good snap opening and closing. 3 5/8" closed. Satin finish 1095 carbon steel Spear and...

Nice condition Korrizy. Made in the 80s by the Bell Company, this one is 8.5 inches OAL. Built without a bale. Stainless steel liners with D stamp. Fires nice and hard. Bayonet blade is in...

Vintage Ka-Bar Dog Head 4 & 1/2" Large Trapper w/ Chestnut Bone Handles +Dog Head Shield...