Guns & Gun Related Stuff

[ken98k]

Went to a military relic show today. Not into military stuff but this little show other things do show up. Traded some military knives I had bought to sell trade for these two antique muzzleloaders. Top full stock rifle is approximately .32 cal and marked on the barrel “G Biddel”. The second rifle is approximately .40 cal and marked “H PETER” on top of the barrel and has a “G. Goulcher” lock. Bores are dark but no significant pitting. Some added copper shielding to both which does hide some wood loss and a repair on the Biddel. Looking forward to taking em out and making them roar again
IMG_8248.jpeg

Gorgeous wood!

[zp4ja]

[quote=ken98k post_id=1183642 time=1741539836 user_id=15140]
[quote=zp4ja post_id=1183566 time=1741491193 user_id=13871]
Very nice Ken.
8" barrel?
Jerry
[/quote]

8 3/8"
[/quote]


Nice Ken.

Jerry

[FRJ]

Went to a military relic show today. Not into military stuff but this little show other things do show up. Traded some military knives I had bought to sell trade for these two antique muzzleloaders. Top full stock rifle is approximately .32 cal and marked on the barrel “G Biddel”. The second rifle is approximately .40 cal and marked “H PETER” on top of the barrel and has a “G. Goulcher” lock. Bores are dark but no significant pitting. Some added copper shielding to both which does hide some wood loss and a repair on the Biddel. Looking forward to taking em out and making them roar again
IMG_8248.jpeg

Those are gorgeous looking old guns!
I hope they work well for you.

[Rockingkj]

Went to a military relic show today. Not into military stuff but this little show other things do show up. Traded some military knives I had bought to sell trade for these two antique muzzleloaders. Top full stock rifle is approximately .32 cal and marked on the barrel “G Biddel”. The second rifle is approximately .40 cal and marked “H PETER” on top of the barrel and has a “G. Goulcher” lock. Bores are dark but no significant pitting. Some added copper shielding to both which does hide some wood loss and a repair on the Biddel. Looking forward to taking em out and making them roar again
IMG_8248.jpeg

Those are gorgeous looking old guns!
I hope they work well for you.

Thanks. Have to get a .32 jag before I can try shooting that one.

[Miller Bro's]

Went to a military relic show today. Not into military stuff but this little show other things do show up. Traded some military knives I had bought to sell trade for these two antique muzzleloaders.........

Nice looking guns!

[Rockingkj]

Thanks! I’m susceptible to two versions of kryptonite , sharp objects and muzzleloaders.

[ken98k]

Thanks! I’m susceptible to two versions of kryptonite , sharp objects and muzzleloaders.

[OLDE CUTLER]

A while back in this thread. I pictured a gray Ruger Wrangler 22lr single action with a 7 and 1/2 inch barrel. I have been shooting it for a few months, but was not happy with the way it shot. It would shoot a decent group, but the point of impact was a considerable point to the left of where the fixed sights were looking. I contacted Ruger about this and they gave me authorization to send it in for repairs. With the point of impact being to the far left as it was, the obvious problem when looking at the sights was that the front sight leaned to the right. This would have been caused by not fitting the barrel correctly at the factory. I received word from Ruger that they would not be fixing the old one, but would be replacing it with a new one which I received yesterday. While one could say that Ruger customer service worked correctly in fixing this, one could also say that Ruger quality control should never have let that one out for sale.

[Unk]

A buddy had this re-production Gen 1 Glock P80 for sale, so I took it off his hands. Basically a new Glock 17 with some of the Gen 1 P80 details. Has a new/ old "tupperware" case with it.

[ken98k]

A buddy had this re-production Gen 1 Glock P80 for sale, so I took it off his hands. Basically a new Glock 17 with some of the Gen 1 P80 details. Has a new/ old "tupperware" case with it.

I bought a Glock 19X last year and have been very happy with it.

[robpa]

Over the years Ive heard a LOT of people baf mouth Glocks, then they ended up getting one and, then many times another and so on.

[ken98k]

Over the years Ive heard a LOT of people baf mouth Glocks, then they ended up getting one and, then many times another and so on.

I never had any interest in them until I saw this one.

Glock 19X.jpg (37.2 KiB) Viewed 5037 times

[New_Windsor_NY]

Do not freak out, I received permission from the management to post this FOR SALE ad.
I have this Remington Rand slide for a 45 caliber, M1911A1 automatic pistol for sale. The left side of the slide has the two-line Remington Rand & address. The "P" proof mark is on the top, and to the rear of the slide. Just above the rear sight. It also has the letter "G" (Government Contract Order?) when the firing pin guard is removed. Overall, this Remington Rand slide is in VERY GOOD condition. I am NOT the original owner of this slide. This slide was on my .45 (Colt) when I obtained it. However, I wanted a Colt slide. I found a Colt slide, and I bought the Colt slide. I have had this Remington Rand slide, safely stored, for 20 years. F.Y.I., my .45 Colt's serial number group, per the Colt archives, was manufactured in 1942. I am asking $430.00, shipping by USPS Priority Mail is included. Payment through PayPal Friends & Family preferred. Payment by postal money order might be considered. Reply by PM ONLY. Thank you.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

*****THE M1911A1 BOOKLET IS JUST FOR THE BACKGROUND, AND IT IS NOT FOR SALE.*****

***** LK AT MY VERY NEXT POST ALSO ***** LK AT MY VERY NEXT POST ALSO ***** LK AT MY VERY NEXT POST ALSO

[New_Windsor_NY]

CONTINUED FROM MY PREVIOUS POST.....

Here, for a LIMITED time, is an ORIGINAL pair of Remington Rand M1911A1 pistol grips. The pair does come with the four, what I assume are the original screws. You can't really tell from the pictures, but each grip is a dark brown in color. I am by no means an expert on grip material, but this pair of grips appears to be made of either plastic(?) OR bakelite(?) Each grip is in EXCELLENT condition, with NO cracks, NO chips, and with NO visible wear. Each grip, has embossed on the back, a star with the letter "K" in the center, followed by the number "18" These two Remington Rand grips were safely stored for 20 years, along with the above posted Remington Rand slide. If you do purchase the above posted Remington Rand slide, I will include this pair of Remington Rand grips at NO ADDITIONAL CHARGE. I will NOT sell these grips separately! PLEASE DO NOT ASK.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

From a "1911" forum.....
"Remington Rand used Keyes grips throughout production. The Keyes grips can be identified by a K in a star on the back of the grip, along with a mold number. The early Keyes grips did not have a reinforcing ring around the screw hole....."

[New_Windsor_NY]

CONTINUED FROM MY TWO PREVIOUS POSTS.....

Here, also for a LIMITED time only, is an ORIGINAL, BOYT -42- holster. I have never actually used it, but my M1911A1 fits in it perfectly. It is a black, genuine leather holster. It measures 10 3/8" long (with the flap closed), 5" wide at the widest (the top) and gradually tapering down in width, to the bottom. It says "US" inside a double oval on the front of the flap. On the back of the holster, between the belt slots, it says, "BOYT -42-" It is a right side, right handed holster. There are two ways of wearing the holster. With a belt through the two, 2 1/8" long belt slots. Or, attached to the grommets on a "military style" web belt. Overall, this holster is in VERY GOOD+ condition. The front shows very little wear. The back shows very little wear, but does have a few minor scratches. The inside of the holster shows some minor wear. ALL of the stitching is present and intact. The four rivets are ALL present and intact. This holster, along with the pair of previously posted Remington Rand grips, and the previously posted Remington Rand slide, were ALL safely stored for 20 years. If you do purchase the previously posted Remington Rand slide, which will also include the pair of Remington Rand grips, I will also include this BOYT -42- holster at NO ADDITIONAL CHARGE. I will NOT sell this holster separately! PLEASE DO NOT ASK. I am asking $430.00, shipping by USPS Priority Mail is included. Payment through PayPal Friends & Family preferred. Payment by postal money order might be considered. Reply by PM ONLY. Thank you.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** The very last side by side picture, shows the holster with my M1911A1 inside it. One picture is with the flap open, and the other picture is with the flap closed. THE GUN IS NOT FOR SALE. I'LL REPEAT THIS - THE GUN IS NOT FOR SALE!!! *****

[doglegg]

CONTINUED FROM MY TWO PREVIOUS POSTS.....

Here, also for a LIMITED time only, is an ORIGINAL, BOYT -42- holster. I have never actually used it, but my M1911A1 fits in it perfectly. It is a black, genuine leather holster. It measures 10 3/8" long (with the flap closed), 5" wide at the widest (the top) and gradually tapering down in width, to the bottom. It says "US" inside a double oval on the front of the flap. On the back of the holster, between the belt slots, it says, "BOYT -42-" It is a right side, right handed holster. There are two ways of wearing the holster. With a belt through the two, 2 1/8" long belt slots. Or, attached to the grommets on a "military style" web belt. Overall, this holster is in VERY GOOD+ condition. The front shows very little wear. The back shows very little wear, but does have a few minor scratches. The inside of the holster shows some minor wear. ALL of the stitching is present and intact. The four rivets are ALL present and intact. This holster, along with the pair of previously posted Remington Rand grips, and the previously posted Remington Rand slide, were ALL safely stored for 20 years. If you do purchase the previously posted Remington Rand slide, which will also include the pair of Remington Rand grips, I will also include this BOYT -42- holster at NO ADDITIONAL CHARGE. I will NOT sell this holster separately! PLEASE DO NOT ASK. I am asking $430.00, shipping by USPS Priority Mail is included. Payment through PayPal Friends & Family preferred. Payment by postal money order might be considered. Reply by PM ONLY. Thank you.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** The very last side by side picture, shows the holster with my M1911A1 inside it. One picture is with the flap open, and the other picture is with the flap closed. THE GUN IS NOT FOR SALE. I'LL REPEAT THIS - THE GUN IS NOT FOR SALE!!! *****

A treasure Skip. Congrats on having it

[New_Windsor_NY]

A.....

Thank you, Floyd.

[New_Windsor_NY]

CONTINUED FROM MY THREE PREVIOUS POSTS.....

I PROMISE, this is the VERY LAST item that will be added to this FOR SALE group of items.
Here, also for a LIMITED time only, is a NEAR MINT, copyright 1994, 263 pages, "Guns, Crime, and Freedom", hardcover book. Authored by Wayne LaPierre, who was the CEO and Executive Vice President of the National Rifle Association of America (NRA), a position he held between the years 1991 and 2024. The foreword is by author Tom Clancy. Also included with the book, is an unused, unattached bookplate, signed simply, "Wayne" This particular book has been boxed and safely stored since I received it, 30 years ago. I have another copy or edition that is on my bookshelf. If you purchase the previously posted Remington Rand slide, which will also include the previously posted pair of Remington Rand grips, and which will also include the previously posted BOYT -42- holster, I will include this book at NO ADDITIONAL CHARGE. I will NOT sell this book separately! PLEASE DO NOT ASK. I am asking $430.00, shipping by USPS Priority Mail is included. Payment through PayPal Friends & Family preferred. Paying by postal money order may be considered. Reply by PM ONLY. Thank you.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

MY EASTER SUNDAY REDUCED ASKING PRICE OFFER HAS EXPIRED.
But the PREVIOUSLY POSTED items are STILL FOR SALE.
They are.....
The Remington Rand M1911A1 slide with firing pin, and firing pin spring.
The Remington Rand M1911A1 grips with four screws.
The Boyt -42- M1911A1 holster.
The Wayne LaPierre, "Guns, Crime, and Freedom", N.R.A. book.
ALL four items for $430, with USPS Priority Mail included.
Payment through PayPal Friends & Family preferred.
Payment by postal money order may be considered.
Personal checks will NOT be considered.
Reply by PM ONLY. Thank you.

[ken98k]

I put a link to your slide on the 1911 board, I guess no one has responded.

[New_Windsor_NY]

I.....

Thank you, Ken.

[New_Windsor_NY]

MY, WHY DO YOU CARE WHY, ASKING PRICE REDUCTION.
THIS ASKING PRICE REDUCTION LASTS UNTIL I DECIDE TO END IT.
This is what you'll receive.....
The Remington Rand M1911A1 slide with firing pin, and firing pin spring.
The Remington Rand M1911A1 pair of grips with four screws.
The Boyt -42- M1911A1 holster.
The Wayne LaPierre, "Guns, Crime, and Freedom", N.R.A. book.
ALL four items for $400, with USPS Priority Mail included.
Payment through PayPal Friends & Family preferred.
Payment by postal money order may be considered.
Personal checks will NOT be considered.
Reply by PM ONLY. Thank you.

***** ALL OF THE FOR SALE ITEMS MENTIONED ABOVE,
HAVE BEEN PREVIOUSLY POSTED, PICTURED, AND DESCRIBED *****

[RedRaiderRick]

[GSPTOPDOG]

With ammo prices so high now this is getting too dang expensive to shoot....

[1967redrider]

20250405_163534.jpg20250405_163618.jpg

Sweet combo, RRR.