A couple of GEC questions
-
Tennessee Dave
- Posts: 278
- Joined: Wed Apr 03, 2013 5:47 pm
- Location: Dayton, TN
A couple of GEC questions
I am about to buy either a #23 Pioneer or #73 Scout. I like to carry my knives so my first inclination is to go with the Scout. I would appreciate some of you who have some experience with these two knives to talk a bit about your thoughts. I sometimes have to overcome my "I can do it" attitude. I know the Pioneer is big and heavy and the Scout is a lot smaller but I found a Pioneer that I really like from the 2007 run.
Give me your honest thoughts regarding if one should attempt to carry the Pioneer or Scout occasionally. For what it's work I work in an office so I am pretty much a khaki guy during the week.
My second questions relates to year of production. Both the Pioneer and Scout that has turned on my fire right now is from the 2007 production. My question is it okay to buy new stock from 2007 or should I buy newer production? In both cases the handle material is Stag.
I value the opinions here and thank you in advance for your response.
Give me your honest thoughts regarding if one should attempt to carry the Pioneer or Scout occasionally. For what it's work I work in an office so I am pretty much a khaki guy during the week.
My second questions relates to year of production. Both the Pioneer and Scout that has turned on my fire right now is from the 2007 production. My question is it okay to buy new stock from 2007 or should I buy newer production? In both cases the handle material is Stag.
I value the opinions here and thank you in advance for your response.
- Mr Rick
- Posts: 794
- Joined: Tue Apr 02, 2013 9:51 pm
- Location: So Cal
- Contact:
Re: A couple of GEC questions
At 4 1/2" the Pioneer is a pretty big lump. but probably manageable in one of these.

I'm carrying the Montana Whittler at 3 1/2" and I have it in this.

In either case, the year of manufacture would not bother me. Go for it!!!

I'm carrying the Montana Whittler at 3 1/2" and I have it in this.

In either case, the year of manufacture would not bother me. Go for it!!!
Rick
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
- jerryd6818
- Posts: 39458
- Joined: Sun Jan 04, 2009 5:23 am
- Location: Farther down the road.
Re: A couple of GEC questions
I don't see a down side. What's your concern? They don't go stale like crackers or sour like milk.Tennessee Dave wrote: is it okay to buy new stock from 2007
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
- big monk
- Bronze Tier

- Posts: 5718
- Joined: Thu Feb 18, 2010 1:53 am
- Location: Ninety Six,South Carolina
Re: A couple of GEC questions
I carry the #73 Scout (below) in my pocket,with no trouble at all__ it is "my primary EDC"___the #23 Pioneer is 4 1/2 inches, lots heavier,and is much more enjoyable to carry in a belt sheath,such as the one below ( much too heavy for pocket carry---IMHO )__ you can't go wrong with the GEC Stag,from any years !!!!! It's all good !!!!!Tennessee Dave wrote:I am about to buy either a #23 Pioneer or #73 Scout. I like to carry my knives so my first inclination is to go with the Scout. I would appreciate some of you who have some experience with these two knives to talk a bit about your thoughts. I sometimes have to overcome my "I can do it" attitude. I know the Pioneer is big and heavy and the Scout is a lot smaller but I found a Pioneer that I really like from the 2007 run.
Give me your honest thoughts regarding if one should attempt to carry the Pioneer or Scout occasionally. For what it's work I work in an office so I am pretty much a khaki guy during the week.
My second questions relates to year of production. Both the Pioneer and Scout that has turned on my fire right now is from the 2007 production. My question is it okay to buy new stock from 2007 or should I buy newer production? In both cases the handle material is Stag.
I value the opinions here and thank you in advance for your response.
I'm not young enough,____to know everything !!!!!!!!!!!!
MONK****
MONK****
-
Tennessee Dave
- Posts: 278
- Joined: Wed Apr 03, 2013 5:47 pm
- Location: Dayton, TN
Re: A couple of GEC questions
I guess I had figured out that they don't go stale.jerryd6818 wrote:I don't see a down side. What's your concern? They don't go stale like crackers or sour like milk.Tennessee Dave wrote: is it okay to buy new stock from 2007
- Mr Rick
- Posts: 794
- Joined: Tue Apr 02, 2013 9:51 pm
- Location: So Cal
- Contact:
Re: A couple of GEC questions
And expensive.Tennessee Dave wrote:I guess I had figured out that they don't go stale.jerryd6818 wrote:I don't see a down side. What's your concern? They don't go stale like crackers or sour like milk.Tennessee Dave wrote: is it okay to buy new stock from 2007I have read some opinions expressed that there is a rather significant difference in stag quality between the older and newer productions. I don't remember which was better and I can not put my finger on the thread. I ordered a #73 from the 2007 production. Looking forward to adding this one to my small collection. I am going to order a couple of those sheaths Rick. Thanks for the link. Man a new hobby is very exciting.
Rick
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
Always looking for custom knives made in Montana.
AAPK #9213.............and proud of it.
- jerryd6818
- Posts: 39458
- Joined: Sun Jan 04, 2009 5:23 am
- Location: Farther down the road.
Re: A couple of GEC questions
After re-reading that post, I came off as a sarcastic smart ass. Very far from my intent. Please accept my apologies.Tennessee Dave wrote:I guess I had figured out that they don't go stale.jerryd6818 wrote:I don't see a down side. What's your concern? They don't go stale like crackers or sour like milk.Tennessee Dave wrote: is it okay to buy new stock from 2007I have read some opinions expressed that there is a rather significant difference in stag quality between the older and newer productions. I don't remember which was better and I can not put my finger on the thread. I ordered a #73 from the 2007 production. Looking forward to adding this one to my small collection. I am going to order a couple of those sheaths Rick. Thanks for the link. Man a new hobby is very exciting.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
-
Tennessee Dave
- Posts: 278
- Joined: Wed Apr 03, 2013 5:47 pm
- Location: Dayton, TN
Re: A couple of GEC questions
Jerry I didn't take it that way. Gave me a good laugh. No worries man. 
- jerryd6818
- Posts: 39458
- Joined: Sun Jan 04, 2009 5:23 am
- Location: Farther down the road.
Re: A couple of GEC questions
Whew! Thanks! Skated another'n.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
- caddyman1973
- Posts: 818
- Joined: Mon Jul 18, 2005 11:42 pm
- Location: Brodhead, Ky
Re: A couple of GEC questions
Cant go wrong with a 73
I love the 23's, but not for pocket packin'. Dont forget the Missouri Trader/Trapper (#42) for the #73 / #23 in between.

You be tolerant....
You coexist....
I will do NEITHER!!!!
You coexist....
I will do NEITHER!!!!
-
Earl
- Posts: 1064
- Joined: Mon Jul 19, 2010 6:09 pm
-
HiPower
- Posts: 700
- Joined: Sat Jul 18, 2009 12:12 am
Re: A couple of GEC questions
single blade 73s for the kahki days & the pioneer & missouri traders in single blades & horizontal belt sheaths on non-work days. i have found the stag thru the years to be consistently superb.--HiPower
HiPower
- On Edge
- Posts: 1373
- Joined: Tue Oct 26, 2010 8:18 pm
- Location: Southern VA
Re: A couple of GEC questions
And there you have it - all great suggestions, and that'll do ya just fine, Dave. Yer all done!HiPower wrote:single blade 73s for the kahki days & the pioneer & missouri traders in single blades & horizontal belt sheaths on non-work days. i have found the stag thru the years to be consistently superb.--HiPower
... for early Spring, that is …
Now, let's talk about about the late Spring / Summer selections, then there's the 'Autumn into Winter' considerations - and don't even get me started on Sunday-go-to-meetin' carries or the Holiday specials …
~ Edge
"Any man who can drive safely while kissing a pretty girl is simply not giving the kiss the attention it deserves."
~ Albert Einstein
~ Albert Einstein
-
HiPower
- Posts: 700
- Joined: Sat Jul 18, 2009 12:12 am
Re: A couple of GEC questions
on edge i like the minkskinner in abalone for holidays in town.--HiPower
HiPower
- On Edge
- Posts: 1373
- Joined: Tue Oct 26, 2010 8:18 pm
- Location: Southern VA
Re: A couple of GEC questions
nice choice, HP!
"Any man who can drive safely while kissing a pretty girl is simply not giving the kiss the attention it deserves."
~ Albert Einstein
~ Albert Einstein