A couple of GEC questions

GEC specializes in highly collectable and premium quality usable pocket knives. The company's USA manufactured knives have quickly proven to be a big hit with both collectors and users who seek quality American craftsmanship.
Post Reply
Tennessee Dave
Posts: 278
Joined: Wed Apr 03, 2013 5:47 pm
Location: Dayton, TN

A couple of GEC questions

Post by Tennessee Dave »

I am about to buy either a #23 Pioneer or #73 Scout. I like to carry my knives so my first inclination is to go with the Scout. I would appreciate some of you who have some experience with these two knives to talk a bit about your thoughts. I sometimes have to overcome my "I can do it" attitude. I know the Pioneer is big and heavy and the Scout is a lot smaller but I found a Pioneer that I really like from the 2007 run.
Give me your honest thoughts regarding if one should attempt to carry the Pioneer or Scout occasionally. For what it's work I work in an office so I am pretty much a khaki guy during the week.

My second questions relates to year of production. Both the Pioneer and Scout that has turned on my fire right now is from the 2007 production. My question is it okay to buy new stock from 2007 or should I buy newer production? In both cases the handle material is Stag.

I value the opinions here and thank you in advance for your response.
User avatar
Mr Rick
Posts: 794
Joined: Tue Apr 02, 2013 9:51 pm
Location: So Cal
Contact:

Re: A couple of GEC questions

Post by Mr Rick »

At 4 1/2" the Pioneer is a pretty big lump. but probably manageable in one of these.

Image

I'm carrying the Montana Whittler at 3 1/2" and I have it in this.

Image


In either case, the year of manufacture would not bother me. Go for it!!! ::tu::
Rick

Always looking for custom knives made in Montana.

AAPK #9213.............and proud of it.
User avatar
jerryd6818
Posts: 39458
Joined: Sun Jan 04, 2009 5:23 am
Location: Farther down the road.

Re: A couple of GEC questions

Post by jerryd6818 »

Tennessee Dave wrote: is it okay to buy new stock from 2007
I don't see a down side. What's your concern? They don't go stale like crackers or sour like milk.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
User avatar
big monk
Bronze Tier
Bronze Tier
Posts: 5718
Joined: Thu Feb 18, 2010 1:53 am
Location: Ninety Six,South Carolina

Re: A couple of GEC questions

Post by big monk »

Tennessee Dave wrote:I am about to buy either a #23 Pioneer or #73 Scout. I like to carry my knives so my first inclination is to go with the Scout. I would appreciate some of you who have some experience with these two knives to talk a bit about your thoughts. I sometimes have to overcome my "I can do it" attitude. I know the Pioneer is big and heavy and the Scout is a lot smaller but I found a Pioneer that I really like from the 2007 run.
Give me your honest thoughts regarding if one should attempt to carry the Pioneer or Scout occasionally. For what it's work I work in an office so I am pretty much a khaki guy during the week.

My second questions relates to year of production. Both the Pioneer and Scout that has turned on my fire right now is from the 2007 production. My question is it okay to buy new stock from 2007 or should I buy newer production? In both cases the handle material is Stag.

I value the opinions here and thank you in advance for your response.
I carry the #73 Scout (below) in my pocket,with no trouble at all__ it is "my primary EDC"___the #23 Pioneer is 4 1/2 inches, lots heavier,and is much more enjoyable to carry in a belt sheath,such as the one below ( much too heavy for pocket carry---IMHO )__ you can't go wrong with the GEC Stag,from any years !!!!! It's all good !!!!! ::tu::
Attachments
GEC #73 Scout Genuine Stag  (EDC) a.JPG
DSCN1545.jpg
I'm not young enough,____to know everything !!!!!!!!!!!!

MONK****
Tennessee Dave
Posts: 278
Joined: Wed Apr 03, 2013 5:47 pm
Location: Dayton, TN

Re: A couple of GEC questions

Post by Tennessee Dave »

jerryd6818 wrote:
Tennessee Dave wrote: is it okay to buy new stock from 2007
I don't see a down side. What's your concern? They don't go stale like crackers or sour like milk.
I guess I had figured out that they don't go stale. :lol: I have read some opinions expressed that there is a rather significant difference in stag quality between the older and newer productions. I don't remember which was better and I can not put my finger on the thread. I ordered a #73 from the 2007 production. Looking forward to adding this one to my small collection. I am going to order a couple of those sheaths Rick. Thanks for the link. Man a new hobby is very exciting.
User avatar
Mr Rick
Posts: 794
Joined: Tue Apr 02, 2013 9:51 pm
Location: So Cal
Contact:

Re: A couple of GEC questions

Post by Mr Rick »

Tennessee Dave wrote:
jerryd6818 wrote:
Tennessee Dave wrote: is it okay to buy new stock from 2007
I don't see a down side. What's your concern? They don't go stale like crackers or sour like milk.
I guess I had figured out that they don't go stale. :lol: I have read some opinions expressed that there is a rather significant difference in stag quality between the older and newer productions. I don't remember which was better and I can not put my finger on the thread. I ordered a #73 from the 2007 production. Looking forward to adding this one to my small collection. I am going to order a couple of those sheaths Rick. Thanks for the link. Man a new hobby is very exciting.
And expensive. ::nod::
Rick

Always looking for custom knives made in Montana.

AAPK #9213.............and proud of it.
User avatar
jerryd6818
Posts: 39458
Joined: Sun Jan 04, 2009 5:23 am
Location: Farther down the road.

Re: A couple of GEC questions

Post by jerryd6818 »

Tennessee Dave wrote:
jerryd6818 wrote:
Tennessee Dave wrote: is it okay to buy new stock from 2007
I don't see a down side. What's your concern? They don't go stale like crackers or sour like milk.
I guess I had figured out that they don't go stale. :lol: I have read some opinions expressed that there is a rather significant difference in stag quality between the older and newer productions. I don't remember which was better and I can not put my finger on the thread. I ordered a #73 from the 2007 production. Looking forward to adding this one to my small collection. I am going to order a couple of those sheaths Rick. Thanks for the link. Man a new hobby is very exciting.
After re-reading that post, I came off as a sarcastic smart ass. Very far from my intent. Please accept my apologies.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
Tennessee Dave
Posts: 278
Joined: Wed Apr 03, 2013 5:47 pm
Location: Dayton, TN

Re: A couple of GEC questions

Post by Tennessee Dave »

Jerry I didn't take it that way. Gave me a good laugh. No worries man. ::tu::
User avatar
jerryd6818
Posts: 39458
Joined: Sun Jan 04, 2009 5:23 am
Location: Farther down the road.

Re: A couple of GEC questions

Post by jerryd6818 »

Whew! Thanks! Skated another'n.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
User avatar
caddyman1973
Posts: 818
Joined: Mon Jul 18, 2005 11:42 pm
Location: Brodhead, Ky

Re: A couple of GEC questions

Post by caddyman1973 »

Cant go wrong with a 73 ::tu:: ::tu:: I love the 23's, but not for pocket packin'. Dont forget the Missouri Trader/Trapper (#42) for the #73 / #23 in between. ::tu:: ::tu::
You be tolerant....
You coexist....
I will do NEITHER!!!!
Earl
Posts: 1064
Joined: Mon Jul 19, 2010 6:09 pm

Re: A couple of GEC questions

Post by Earl »

yep,42's are definitely worth a look.........
Attachments
Knives 3046.jpg
HiPower
Posts: 700
Joined: Sat Jul 18, 2009 12:12 am

Re: A couple of GEC questions

Post by HiPower »

single blade 73s for the kahki days & the pioneer & missouri traders in single blades & horizontal belt sheaths on non-work days. i have found the stag thru the years to be consistently superb.--HiPower
HiPower
User avatar
On Edge
Posts: 1373
Joined: Tue Oct 26, 2010 8:18 pm
Location: Southern VA

Re: A couple of GEC questions

Post by On Edge »

HiPower wrote:single blade 73s for the kahki days & the pioneer & missouri traders in single blades & horizontal belt sheaths on non-work days. i have found the stag thru the years to be consistently superb.--HiPower
And there you have it - all great suggestions, and that'll do ya just fine, Dave. Yer all done!

... for early Spring, that is … :shock:

Now, let's talk about about the late Spring / Summer selections, then there's the 'Autumn into Winter' considerations - and don't even get me started on Sunday-go-to-meetin' carries or the Holiday specials … ::facepalm::

::smirk::

~ Edge
"Any man who can drive safely while kissing a pretty girl is simply not giving the kiss the attention it deserves."

~ Albert Einstein
HiPower
Posts: 700
Joined: Sat Jul 18, 2009 12:12 am

Re: A couple of GEC questions

Post by HiPower »

on edge i like the minkskinner in abalone for holidays in town.--HiPower
HiPower
User avatar
On Edge
Posts: 1373
Joined: Tue Oct 26, 2010 8:18 pm
Location: Southern VA

Re: A couple of GEC questions

Post by On Edge »

nice choice, HP!
"Any man who can drive safely while kissing a pretty girl is simply not giving the kiss the attention it deserves."

~ Albert Einstein
Post Reply

Return to “Great Eastern Cutlery (GEC) Collector's Forum”