Cool Old Tools

Miller Bro's · Post by **Miller Bro's** » Wed Jun 22, 2011 12:56 am

Here is an unusual old tool I picked up. I like the old "Alligator" style wrench knives that Cattaraugus made, so this caught my eye right away when I seen it. I found the patent for it, although my handle is different and I cannot figure out what that large hole and notch is at the end of the handle. The whole thing comes right apart with three screws so you can change the jaw if it gets damaged. I got a kick out of the advertising "Extra Jaw .25". It is in good condition being over 100 years old, don`t think they made these very long

Here is the patent http://www.google.com/patents?id=f_hcAA ... &q&f=false

Anyone else have any cool old tools like this? Let`s see `em

MITCH RAPP · Post by **MITCH RAPP** » Wed Jun 22, 2011 1:50 am

Very Cool Old Tool!

Back in the Day, you could buy a metal hand tool for 25 cents. I could have used that tool the other night on a Steak my wife cooked.

bronco2 · Post by **bronco2** » Wed Jun 22, 2011 3:10 am

i like it...

FRJ · Post by **FRJ** » Fri Jun 24, 2011 5:09 pm

I've got some Cool Old Tools to show. This stuff was handy; haven't been in the other garage yet. Mercy!!!

FRJ · Post by **FRJ** » Fri Jun 24, 2011 5:17 pm

A few more things.

FRJ · Post by **FRJ** » Fri Jun 24, 2011 5:27 pm

Please, bear with me..........

The Taylor clamp;... A guy had five of these. I said how much do you want. $25. I was going to give him a buck and a quart, but he said, Oh no, $25 for all of them. O.K. ......I use these. They are fine.

CCBill · Post by **CCBill** » Fri Jun 24, 2011 6:14 pm

WOW!!! lotsa waaaaay cool "stuff". Keep it comin'.
...CCBill...

vikingdog · Post by **vikingdog** » Fri Jun 24, 2011 7:00 pm

I knew you had a big stash of cool tools Joe!

What CCBill said...

vikingdog · Post by **vikingdog** » Fri Jun 24, 2011 7:36 pm

I got this cigar box with tools along with some other hand tools when my grand dad died in '77.

Miller Bro's · Post by **Miller Bro's** » Fri Jun 24, 2011 8:48 pm

Nice stuff everyone

Joe, what a load of cool old tools you have

tjmurphy · Post by **tjmurphy** » Fri Jun 24, 2011 9:07 pm

S.S. Kresge!! Man I've not seen that name since I was a kid in Newport, Ky. There were two Kresge's, on Monmouth St. a block apart and an F.W. Woolworth in the same block. Both were the "five and dimes" at that time. Brings back great memories of a kid with a quarter.

Miller Bro's · Post by **Miller Bro's** » Fri Jun 24, 2011 9:37 pm

Here is another cool old tool for you P A boys

It is a skate sharpening plane, patented 1894

FRJ · Post by **FRJ** » Sat Jun 25, 2011 3:52 am

Dimitri, that skate sharpening tool is a rare find.

RobesonsRme.com · Post by **RobesonsRme.com** » Sat Jun 25, 2011 4:05 pm

TJ, have you been in a K-Mart lately?

They are S.S. Kresge's answer to Wal-Mart.

Charlie Noyes

tjmurphy · Post by **tjmurphy** » Sat Jun 25, 2011 7:06 pm

Just ain't the same, Charlie

MITCH RAPP · Post by **MITCH RAPP** » Sat Jun 25, 2011 7:26 pm

TJ, you are correct sir! My Grannie used to take me to Woolworths when I was a Kid and I was in Heaven!

orvet · Post by **orvet** » Sat Jun 25, 2011 8:04 pm

Lots of cool tools in this thread!
Here is an interesting old pair of pliers I picked up last summer.

johnnierotten · Post by **johnnierotten** » Tue Jun 28, 2011 3:54 am

Wow...you Fella's have some really cool stuff.

Here is my contribution.....I'll have to dig some more stuff up.

knives-are-quiet · Post by **knives-are-quiet** » Tue Jun 28, 2011 5:39 am

tjmurphy wrote:S.S. Kresge!! Man I've not seen that name since I was a kid in Newport, Ky. There were two Kresge's, on Monmouth St. a block apart and an F.W. Woolworth in the same block. Both were the "five and dimes" at that time. Brings back great memories of a kid with a quarter.

5 and 10 ~ Haven't heard that term in many, many years.
My Mother used to bring my Brothers and Sisters and I to at least one of those two stores once a week when I was a youngster. Kresge's had a cafeteria we would eat in all the time.
Those were the days.

J W

orvet · Post by **orvet** » Tue Jun 28, 2011 6:27 am

Here is an old Irwin adjustable drill bit for an old hand brace.
It also has an extra larger cutter with it.
I even have the box it came in.
It belonged to my great Uncle Tom.
I suspect it is from the 1920s or 1930s, just based on his age.
Maybe someone else can date it from the box.

Miller Bro's · Post by **Miller Bro's** » Mon Jul 04, 2011 11:57 pm

Trephine (1800s)
This trephine was a hand-powered drill with a cylindrical blade that was used to bore into the skull. The spike in the center was used to start the procedure and to hold the blade in place while cutting.

PigSticker · Post by **PigSticker** » Tue Jul 05, 2011 12:28 am

Ha that's a hole saw fer cuttin holes in skulls--man that had to be greusome to use on a guys head without nothin but hand power--
That Irwin auger bit with the protractor adjustment is very cool too

Miller Bro's · Post by **Miller Bro's** » Fri Nov 04, 2011 9:27 pm

Here is another oldie I picked up.

Can you guess what it is?

MTS6607 · Post by **MTS6607** » Sat Nov 05, 2011 12:04 am

Tooth Puller?

Miller Bro's · Post by **Miller Bro's** » Sat Nov 05, 2011 12:40 am

Yes it is

All About Pocket Knives

Cool Old Tools

Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools

Re: Cool Old Tools