Everyday Carry
-
jabberwocky
- Posts: 116
- Joined: Tue Mar 28, 2006 4:47 pm
Everyday Carry
Hello Everyone...
Haven't been on the forum(s) for a couple of weeks...just got back to
Ohio from my annual vacation with family up on the Cape...three weeks
in Hyannisport...(well, can't exactly say I'm thrilled to be back in
Cleveland...)
Anyway, I was wondering, (if this is an appropriate topic)...what everyone
uses as their everyday carry knife? I've gotten loads of info just by reading the posted topics almost everyday here, and am really impressed
by the knowledge of those on the forum(s).
I'd be really interested to know what people out there think is a good,
utilitarian pocket knife to have available on their person everyday. I
happen to be really attached to a Case Medium Stockman, red jigged bone handles, and CV blades...I carry it all the time.
Haven't been on the forum(s) for a couple of weeks...just got back to
Ohio from my annual vacation with family up on the Cape...three weeks
in Hyannisport...(well, can't exactly say I'm thrilled to be back in
Cleveland...)
Anyway, I was wondering, (if this is an appropriate topic)...what everyone
uses as their everyday carry knife? I've gotten loads of info just by reading the posted topics almost everyday here, and am really impressed
by the knowledge of those on the forum(s).
I'd be really interested to know what people out there think is a good,
utilitarian pocket knife to have available on their person everyday. I
happen to be really attached to a Case Medium Stockman, red jigged bone handles, and CV blades...I carry it all the time.
-
alexander
- Posts: 43
- Joined: Tue Jan 17, 2006 3:57 pm
- Location: balto to philly
Mine rotates according to my mood, and sometimes according to my dress.
Today I'm in jeans, so I can comfortably carry my Case chestnut bone CV trapper.
If I were wearing slacks, I'd carry something smaller; most likely a Queen City small trapper (1095, red wormgroove handles) or a Queen bonestag canoe.
A good across-the-board carry is my 8OT.
These are the primary users in my collection (which is made up entirely of users...
).
Today I'm in jeans, so I can comfortably carry my Case chestnut bone CV trapper.
If I were wearing slacks, I'd carry something smaller; most likely a Queen City small trapper (1095, red wormgroove handles) or a Queen bonestag canoe.
A good across-the-board carry is my 8OT.
These are the primary users in my collection (which is made up entirely of users...
- TKC
- Posts: 376
- Joined: Sat Dec 10, 2005 2:59 am
- Location: New England
- Contact:
My EDC is a Rick Hinderer XM-18 (with orange G-10) & Peter Atwood Solar Arc. When I am in Boston, my EDC is Solar Arc & Patrick Nihiser "Little Teaser". Or I carry my small Sebbie. But I have been carrying the XM-18 since I got it at Blade from Rick. Here is Rick's site, and the XM-18: http://www.rickhindererknives.com/
"He is your friend, your partner, your defender, your dog. You are his life, his love, his leader. He will be yours, faithful and true, to the last beat of his heart. You owe it to him to be worthy of such devotion."
-
Blade Runner
- Posts: 1109
- Joined: Sat Feb 11, 2006 1:50 am
- Location: Gainesville Georgia
-
knife-nut
- Bronze Tier

- Posts: 1547
- Joined: Fri Jun 30, 2006 2:09 am
- Location: Wichita, Kansas
everyday carrier
I carry a Butch Vallotton hidden release auto. It's a great knife to carry.
- jonet143
- Gold Tier

- Posts: 6922
- Joined: Fri Jun 23, 2006 3:33 am
- Location: w'ford-tejas
edc
these are not my sunday carries.
some more posts on topic edc and neck knives in this forum.
johnnie
some more posts on topic edc and neck knives in this forum.
johnnie
- Attachments
-
- spydey and son
- spyderco&son.JPG (143.2 KiB) Viewed 5739 times
johnnie f 1949
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
-
Navajero
- Posts: 9
- Joined: Thu Feb 23, 2006 10:05 pm
I always carry my Leatherman Wave on my belt, but in my pocket, I used to switch from my Case Stockman 318 to my SAK sportsman. However, I recently got a Leatherman Micra, and I'm hooked. I forgot just how useful a little tool it is. I used to have one, but lost it and replaced it with a Squirt P4. The fact that the tools were on the outside was pretty cool, but it seemed too small to really be useful, and the knife eventually got all wobbly. The Micra is small as well, but it just seems a bit tougher for my tastes. And no, it won't fix your car or do any BIG cutting chores, but day to day, it habdles all my needs. It's scissors are tough and bigger then the SAKs, the knife sharp as a razor, and it fits extremely well on my Keychain, which is with me ALL the time. So, my Wave handles all my big chores, but for just about anything else that comes along in my day, the Micra rules!!!
-
Navajero
- Posts: 9
- Joined: Thu Feb 23, 2006 10:05 pm
I always carry my Leatherman Wave on my belt, but in my pocket, I used to switch from my Case Stockman 318 to my SAK sportsman. However, I recently got a Leatherman Micra, and I'm hooked. I forgot just how useful a little tool it is. I used to have one, but lost it and replaced it with a Squirt P4. The fact that the tools were on the outside was pretty cool, but it seemed too small to really be useful, and the knife eventually got all wobbly. The Micra is small as well, but it just seems a bit tougher for my tastes. And no, it won't fix your car or do any BIG cutting chores, but day to day, it habdles all my needs. It's scissors are tough and bigger then the SAKs, the knife sharp as a razor, and it fits extremely well on my Keychain, which is with me ALL the time. So, my Wave handles all my big chores, but for just about anything else that comes along in my day, the Micra rules!!!
-
Hukk
- Posts: 4546
- Joined: Mon Mar 06, 2006 4:04 am
- El Lobo
- Gold Tier

- Posts: 3036
- Joined: Tue Dec 14, 2004 4:47 pm
- Location: Arizona, right here in the U.S. of A.
That is a great looking knife Hukk.
Here is one I really enjoy carrying.
Bill
Here is one I really enjoy carrying.
Bill
- Attachments
-
- TAD Custom.jpg (19.95 KiB) Viewed 5726 times
Please visit the Member Stores here at AAPK, including my store.....GET AN EDGE!
http://www.allaboutpocketknives.com/getanedge
http://www.allaboutpocketknives.com/getanedge
-
remington collector
- Posts: 1396
- Joined: Sat Dec 17, 2005 9:53 pm
- Location: north carolina
- sunburst
- Posts: 2921
- Joined: Wed Nov 23, 2005 10:07 pm
- Location: The Scrublands of Central Florida
- El Lobo
- Gold Tier

- Posts: 3036
- Joined: Tue Dec 14, 2004 4:47 pm
- Location: Arizona, right here in the U.S. of A.
Ok,
Here is another one I carry every day, without fail...

Well, maybe I don't really CARRY it any further than from the knife drawer to the cutting board..
..but we do use it most every day. It's the first Chef's knife ever done by David Winston...done for my wife a couple years ago.
Not meant to be a thread hijack...just having fun.
Bill
Here is another one I carry every day, without fail...

Well, maybe I don't really CARRY it any further than from the knife drawer to the cutting board..
Not meant to be a thread hijack...just having fun.
Bill
Please visit the Member Stores here at AAPK, including my store.....GET AN EDGE!
http://www.allaboutpocketknives.com/getanedge
http://www.allaboutpocketknives.com/getanedge
- Don Luis
- Posts: 114
- Joined: Sun May 14, 2006 5:34 am
- Location: Mexico City, Mexico
I usually carry a folding plier multitool, A SAK and a traditional slipjoint, the multitool is usually an old Leatherman original, sometimes a Leatherman SideClip, the SAK is usually a Victorinox Huntsman, sometimes a Victorinox Farmer, the slipjoint is usually a Schrade stockman (897UH or 98OT or 34OT). lately I've been carrying an old Camillus Military Utility, just to keep Camillus in my mind now that they are in trouble.
Wow, that's a nice chef knife!!!!!.
The picture shows some of the knives mentioned and since I don't own such a nice chef knife I've included an old forged carbon Usuba which cuts fine.
Luis
Wow, that's a nice chef knife!!!!!.
The picture shows some of the knives mentioned and since I don't own such a nice chef knife I've included an old forged carbon Usuba which cuts fine.
Luis
- Attachments
-
- knives-a01.jpg (49.71 KiB) Viewed 5626 times
- El Lobo
- Gold Tier

- Posts: 3036
- Joined: Tue Dec 14, 2004 4:47 pm
- Location: Arizona, right here in the U.S. of A.
Luis,
I admire your lanyards, fobs, and knot work.
Bill
I admire your lanyards, fobs, and knot work.
Bill
Please visit the Member Stores here at AAPK, including my store.....GET AN EDGE!
http://www.allaboutpocketknives.com/getanedge
http://www.allaboutpocketknives.com/getanedge
- longbeachbum
- Posts: 381
- Joined: Fri Mar 11, 2005 8:44 pm
- Location: Long Beach, CA
Some of my favorite and most frequently carried EDC's are:
-- Moore Maker 3 7/8" yellow punchblade stockman. Camillus made, nothing fancy, but something about it just feels really right.
-- Shapleigh's 3 5/8 buffalo horn cattle knife. If you can get past the BS about recently discovered 50 year old parts etc etc, it's a very nice Olbertz made slipjoint. Fit and finish every bit as good as a Schatt and Morgan Railsplitter, with better steel.
-- Case yellow CV mini Copperlock. Elegant small gents folder with great steel for thirty bucks. I carry this one to the office a lot.
-- Bulldog "Ground Hog". I carry this one when I'm going to be doing any whittling, which is actually pretty often. Best whittling knife I know of hands down. It puts a congress to shame.
-- Schrade 8OT. No explanation necessary I presume.
-- SAK black tinker, for when pure practicality is the goal. If I'm working around the house, that's what I'll carry.
-- In addition to these I generally carry a Spyderco Endura, Delica, or Native in the opposite pocket.
I'm not big on belt sheathes, but I'm never far from a Leatherman Wave as I've got one in the house and another in the car.
Then I have about thirty other knives in my EDC drawer which don't get carried as often, but they do get carried!
Great thread!
-- Moore Maker 3 7/8" yellow punchblade stockman. Camillus made, nothing fancy, but something about it just feels really right.
-- Shapleigh's 3 5/8 buffalo horn cattle knife. If you can get past the BS about recently discovered 50 year old parts etc etc, it's a very nice Olbertz made slipjoint. Fit and finish every bit as good as a Schatt and Morgan Railsplitter, with better steel.
-- Case yellow CV mini Copperlock. Elegant small gents folder with great steel for thirty bucks. I carry this one to the office a lot.
-- Bulldog "Ground Hog". I carry this one when I'm going to be doing any whittling, which is actually pretty often. Best whittling knife I know of hands down. It puts a congress to shame.
-- Schrade 8OT. No explanation necessary I presume.
-- SAK black tinker, for when pure practicality is the goal. If I'm working around the house, that's what I'll carry.
-- In addition to these I generally carry a Spyderco Endura, Delica, or Native in the opposite pocket.
I'm not big on belt sheathes, but I'm never far from a Leatherman Wave as I've got one in the house and another in the car.
Then I have about thirty other knives in my EDC drawer which don't get carried as often, but they do get carried!
Great thread!
-
jabberwocky
- Posts: 116
- Joined: Tue Mar 28, 2006 4:47 pm
Well...this forum is absolutely great...I'm glad I went ahead and started this thread a few days ago. Just some amazing knives, and some really cool opinions on everyday carries...(so much new info).
I've learned quite a bit just by investigating some of the knives and knife-
makers mentioned, and visiting their websites. And some of the photos!
(Hukk and El Lobo...sweet knives!)
I've learned quite a bit just by investigating some of the knives and knife-
makers mentioned, and visiting their websites. And some of the photos!
(Hukk and El Lobo...sweet knives!)
- longbeachbum
- Posts: 381
- Joined: Fri Mar 11, 2005 8:44 pm
- Location: Long Beach, CA
Hey Butch, after reading your post I dusted off my Indian Head 4" stag stockman and carried it today. I'd forgotten how nice it is. I think we'll add this to the regular EDC rotation.ButchTN wrote:My Monday to Friday EDC is a Bulldog copperhead and my weekend EDC is an Indian Head stag handle stockman. I have nothing but good things to say about both of them![]()
Butch
Regards,
Jim
-
Hukk
- Posts: 4546
- Joined: Mon Mar 06, 2006 4:04 am
A knife I really like and at a price you can't beat is one made by Wendall Carson. I just bought a Swayback Muskrat Trapper with Sea Cow scales. The quality is outstanding and the brand is the Fightin Bull. I found out about them from a post by El Lobo, I should say I had seen them on eBay but El Lobo's post was a convincing one. I will buy another as a carrier and keep the other as a collectable. He makes a very fine knife. 
- El Lobo
- Gold Tier

- Posts: 3036
- Joined: Tue Dec 14, 2004 4:47 pm
- Location: Arizona, right here in the U.S. of A.
OK,
Small hijack here, as I've never carried this knife.
However, Hukk has been a prolific poster as of late and has contibuted much to the forums. So as they sorta say...this one's for you.
Wendell Carson Trapper... in black baleen.
For those who may wonder...baleen is what whales, those who don't have teeth, use to sort of strain their food. To me it has a feel similar to horn...but is made of Keratin.
It may not be quite as pretty as abalone, but I flat guar-an-tee they put up a big fight if you try to take it from their mouths.
Bill
Small hijack here, as I've never carried this knife.
However, Hukk has been a prolific poster as of late and has contibuted much to the forums. So as they sorta say...this one's for you.
Wendell Carson Trapper... in black baleen.
For those who may wonder...baleen is what whales, those who don't have teeth, use to sort of strain their food. To me it has a feel similar to horn...but is made of Keratin.
It may not be quite as pretty as abalone, but I flat guar-an-tee they put up a big fight if you try to take it from their mouths.
Bill
- Attachments
-
- Wendell Carson Baleen Trapper.jpg (26.91 KiB) Viewed 4074 times
Please visit the Member Stores here at AAPK, including my store.....GET AN EDGE!
http://www.allaboutpocketknives.com/getanedge
http://www.allaboutpocketknives.com/getanedge
- longbeachbum
- Posts: 381
- Joined: Fri Mar 11, 2005 8:44 pm
- Location: Long Beach, CA
I've got four of Wendell's knives and I agree, very nice and a great price for what amounts to a semi custom. I'll try to take some Fightin Bull pics. I do EDC one of them, a 4" red bone stockman, so unlike some people's posts, this is not a thread hijack. 
Edited to add pictures. Click on the picture to view a better resolution image.
Edited to add pictures. Click on the picture to view a better resolution image.
- Attachments
-
- The one on top is the one I EDC. The others are drawer queens.
- Fightin Bull resized2.jpg (170.56 KiB) Viewed 4061 times
-
- EDC is on the left
- Fightin Bull resized1.jpg (143.93 KiB) Viewed 4062 times