Ring opener knives
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
If you’re gonna be dumb... You better be tough!
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
This one just arrived from Australia!
Late pics, and dark ones... I will try and post better tomorrow.
This one is an unusual shape for sure ( by ring turn standards)
Super unique one!
Late pics, and dark ones... I will try and post better tomorrow.
This one is an unusual shape for sure ( by ring turn standards)
Super unique one!
If you’re gonna be dumb... You better be tough!
-
doglegg
- Gold Tier

- Posts: 23980
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
Re: Ring opener knives
It looks like a swell center
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Is that what this shape is known as? It’s just an arched top, with a slight coffin edge bottom. I’ve never seen a ring turn in this style. The rings are a light material almost like silver. I do have another with rings made of this material. It doesn’t ‘clang’ like metal...
If you’re gonna be dumb... You better be tough!
-
doglegg
- Gold Tier

- Posts: 23980
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
Re: Ring opener knives
Not sure if it is a true swell center but it does have the look. A shape common to some whittlers. A very cool knife.

- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Super interesting, and cool! Thank you - for that information...
If you’re gonna be dumb... You better be tough!
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...
Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...
Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...
If you’re gonna be dumb... You better be tough!
- Madmarco
- Gold Tier

- Posts: 12039
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Ring opener knives
Hi B4U! I'm not at all familiar with ring-turn knives,bronze4u wrote: ↑Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...
Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...
ring turn Birks 1.jpgring turn Birks.jpg
-
knife7knut
- Posts: 10697
- Joined: Tue Nov 06, 2007 9:02 pm
- Location: Tecumseh,Michigan
Re: Ring opener knives
Nice one! Glad to see you back posting.I would keep an eye on that one as it looks like there is evidence of celluloid out-gassing on the blade.bronze4u wrote: ↑Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...
Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...
ring turn Birks 1.jpgring turn Birks.jpg
Adventure BEFORE Dementia!
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Thank you!
Not sure what that means exactly, (My wife has accused me of this though!)
However, celluloid has definitely shrunk.
Not sure what that means exactly, (My wife has accused me of this though!)
However, celluloid has definitely shrunk.
knife7knut wrote: ↑Mon Jan 11, 2021 8:42 pmNice one! Glad to see you back posting.I would keep an eye on that one as it looks like there is evidence of celluloid out-gassing on the blade.bronze4u wrote: ↑Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...
Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...
ring turn Birks 1.jpgring turn Birks.jpg
If you’re gonna be dumb... You better be tough!
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Madmarco, welcomeMadmarco wrote: ↑Mon Jan 11, 2021 8:36 pmHi B4U! I'm not at all familiar with ring-turn knives,bronze4u wrote: ↑Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...
Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...
ring turn Birks 1.jpgring turn Birks.jpgso I'm hoping you would explain their operation to me. When you turn the ring does the blade fly open by a spring, or does the blade gradually open as you turn the ring, or...? Thanks, Mark!
![]()
there's just a square torrent/peg through a square hole in the blade that slowly turns and opens each blade. It is said these were initially for women as to not break nails trying to open blades... Although, I have evidence they were for the blind as well...
If you’re gonna be dumb... You better be tough!
-
doglegg
- Gold Tier

- Posts: 23980
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
Re: Ring opener knives
What a great knife b4u. I would heed knife7knuts advice and store it away from your other knives to keep it from damaging them if it out gasses further.
Celluloid gives off corrosive gasses when they begin to break down. It will sure eat up any metal around it. You have too many wonderful knives to see that happen. But that is a pretty one. Congrats.

Celluloid gives off corrosive gasses when they begin to break down. It will sure eat up any metal around it. You have too many wonderful knives to see that happen. But that is a pretty one. Congrats.
- Madmarco
- Gold Tier

- Posts: 12039
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: Ring opener knives
Thanks very much for your explanation B4U!bronze4u wrote: ↑Mon Jan 11, 2021 10:14 pmMadmarco, welcomeMadmarco wrote: ↑Mon Jan 11, 2021 8:36 pmHi B4U! I'm not at all familiar with ring-turn knives,bronze4u wrote: ↑Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...
Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...
ring turn Birks 1.jpgring turn Birks.jpgso I'm hoping you would explain their operation to me. When you turn the ring does the blade fly open by a spring, or does the blade gradually open as you turn the ring, or...? Thanks, Mark!
![]()
there's just a square torrent/peg through a square hole in the blade that slowly turns and opens each blade. It is said these were initially for women as to not break nails trying to open blades... Although, I have evidence they were for the blind as well...
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Sure thing Madmarco!Madmarco wrote: ↑Tue Jan 12, 2021 12:14 amThanks very much for your explanation B4U!bronze4u wrote: ↑Mon Jan 11, 2021 10:14 pmMadmarco, welcome
there's just a square torrent/peg through a square hole in the blade that slowly turns and opens each blade. It is said these were initially for women as to not break nails trying to open blades... Although, I have evidence they were for the blind as well...I kindda had a feeling that was how they open, but really didn't know for sure, and now you've confirmed it!
Thanks again!
![]()
If you’re gonna be dumb... You better be tough!
- WillyCamaro
- Posts: 6186
- Joined: Thu Jan 10, 2019 4:03 am
- Location: Yorkton, Saskatchewan
Re: Ring opener knives
Hey Bronze my man, good too see you back mate!
Hope you've been healthy, staying out of trouble this past year (well, as much as you can, especially being cooped up with the missus...
).
Another great ring-turner sir! I really like the red handles on it, gives it a very unique, and distinctive look.

Hope you've been healthy, staying out of trouble this past year (well, as much as you can, especially being cooped up with the missus...
Another great ring-turner sir! I really like the red handles on it, gives it a very unique, and distinctive look.
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Hey WillyCamaro, thanks! I have been healthy and well!
Luckily, my wife and I truly get along together! Lol
But I hear that... lol I agree, the red is nice!
Hope you’ve been healthy and happy as well.
Cheers!
Luckily, my wife and I truly get along together! Lol
But I hear that... lol I agree, the red is nice!
Hope you’ve been healthy and happy as well.
Cheers!
WillyCamaro wrote: ↑Tue Jan 12, 2021 12:57 am Hey Bronze my man, good too see you back mate!
Hope you've been healthy, staying out of trouble this past year (well, as much as you can, especially being cooped up with the missus...).
![]()
Another great ring-turner sir! I really like the red handles on it, gives it a very unique, and distinctive look.
![]()
If you’re gonna be dumb... You better be tough!
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Hey there! Thank you! Luckily, I store each knife individually wrapped in paper towel. They stay dry and well this way. Thanks!
doglegg wrote: ↑Mon Jan 11, 2021 11:35 pm What a great knife b4u. I would heed knife7knuts advice and store it away from your other knives to keep it from damaging them if it out gasses further.
Celluloid gives off corrosive gasses when they begin to break down. It will sure eat up any metal around it. You have too many wonderful knives to see that happen. But that is a pretty one. Congrats.![]()
![]()
![]()
If you’re gonna be dumb... You better be tough!
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Hey guys! Hope everyone and everything is good.
My wife and I took on our first vaccine doses, yesterday. It was like a well-oiled machine where we went for it.
I was never one to get a 'flu shot' or a polymer handgun for that matter -
But figured I’d better grab both! (never say never! I already had the baby 'G'! Just have had it out making upgrades on it.)
Anyhow, I am posting a new ring turn! I really like the uniqueness of this puppy. L.S.M. German sterling. For a small knife, this one has some weight to it!
My wife and I took on our first vaccine doses, yesterday. It was like a well-oiled machine where we went for it.
I was never one to get a 'flu shot' or a polymer handgun for that matter -
But figured I’d better grab both! (never say never! I already had the baby 'G'! Just have had it out making upgrades on it.)
Anyhow, I am posting a new ring turn! I really like the uniqueness of this puppy. L.S.M. German sterling. For a small knife, this one has some weight to it!
If you’re gonna be dumb... You better be tough!
- TPK
- Posts: 11021
- Joined: Sun Mar 31, 2019 6:16 pm
- Location: Bayern, Germany
- Contact:
Re: Ring opener knives
Very nice looking little pen knife!bronze4u wrote: ↑Thu Apr 08, 2021 4:45 pm Hey guys! Hope everyone and everything is good.
My wife and I took on our first vacations, yesterday. It was like a well-oiled machine where we went for it.
I was never one to get a 'flu shot' or a polymer handgun for that matter -
But figured I’d better grab both! (never say never! I already had the baby 'G'! Just have had it out making upgrades on it.)
Anyhow, I am posting a new ring turn! I really like the uniqueness of this puppy. L.S.M. German sterling. For a small knife, this one has some weight to it!
TOM - KGFG - (Knife-Guy-From-Germany)
I believe..., every knife is a soul, looking for a soulmate.
Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano
US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
I believe..., every knife is a soul, looking for a soulmate.
Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano
US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
-
doglegg
- Gold Tier

- Posts: 23980
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
Re: Ring opener knives
Kirk, I like the 26, I like the additions to it and I love the knife. Not much use on that one. You always have great ones.

- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
Re: Ring opener knives
Doglegg
Thanks! Yes it has not been used or abused much at all. Here’s what I’ve done to my 26 so far:
Upgrades:
1. ‘BLACKLIST’ match grade fluted barrel
2. ‘STRYKOUT’ trigger shoe with .25 trigger & slide polishing job. 3. Pearce magazine grip extension 4. SS 16# guide-rod 5. Hogue rubber grip. 6. TLR-6 Streamlight 7. Titanium back plate ( smooth) 8. About to add: Black SS dimple pin set 9. About to add: Trijicon HD XR Night Sight Set. 10. About to add: Ghost ultimate 3.5 lb trigger connector.
Thanks! Yes it has not been used or abused much at all. Here’s what I’ve done to my 26 so far:
Upgrades:
1. ‘BLACKLIST’ match grade fluted barrel
2. ‘STRYKOUT’ trigger shoe with .25 trigger & slide polishing job. 3. Pearce magazine grip extension 4. SS 16# guide-rod 5. Hogue rubber grip. 6. TLR-6 Streamlight 7. Titanium back plate ( smooth) 8. About to add: Black SS dimple pin set 9. About to add: Trijicon HD XR Night Sight Set. 10. About to add: Ghost ultimate 3.5 lb trigger connector.
If you’re gonna be dumb... You better be tough!
- WillyCamaro
- Posts: 6186
- Joined: Thu Jan 10, 2019 4:03 am
- Location: Yorkton, Saskatchewan
Re: Ring opener knives
Custom ring-turner. Custom Glock. What's not to love!

- bronze4u
- Posts: 559
- Joined: Mon Mar 20, 2017 7:05 am
- Location: Tiburon
- Contact:
- 1967redrider
- Gold Tier

- Posts: 21541
- Joined: Wed Feb 02, 2011 4:23 pm
- Location: Alexandria, VA
- Contact:
Re: Ring opener knives
Two winners there!

Pocket, fixed, machete, axe, it's all good!
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
CHRIST IS KING
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
CHRIST IS KING