Eureka Pattern Name
- upnorth
- Posts: 2959
- Joined: Sun Oct 15, 2006 8:43 pm
- Location: Vancouver, Canada
Eureka Pattern Name
I am trying to find the earliest reference to the "Eureka" pattern name. There are so many of you collectors out there who have old catalogs, I was hoping you wouldn't mind seeing if you have the actual name in print, referring to a knife of that style!
Here's an extract from LG4, and a 1921 Catalog cut of a Western States, the earliest reference I can find for the name.
Here's an extract from LG4, and a 1921 Catalog cut of a Western States, the earliest reference I can find for the name.
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!
Johnnie Fain would have approved!
1949 - 2009
Johnnie Fain would have approved!
1949 - 2009
- Pen & Toothpick
- Posts: 846
- Joined: Sat Jun 14, 2008 4:09 am
Re: Eureka Pattern Name
You happen to have any photos of some of your Eureka's? Sometimes I debate with myself whether I like Jack Knives or Pen Knives more..that never gets anywhere.
All three knifes in the book and article are very fine looking to me!
All three knifes in the book and article are very fine looking to me!
- upnorth
- Posts: 2959
- Joined: Sun Oct 15, 2006 8:43 pm
- Location: Vancouver, Canada
Re: Eureka Pattern Name
I don't own one, P & T!! That's part of the reason I posted Catalog pictures, but I am trying to find out how far back the pattern name goes. It's such an interesting name AND pattern. I've seen a couple I like, but the prices were very high. . . . . . . some day I'll own one. Meantime, I'll find out all I can. 
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!
Johnnie Fain would have approved!
1949 - 2009
Johnnie Fain would have approved!
1949 - 2009
- Pen & Toothpick
- Posts: 846
- Joined: Sat Jun 14, 2008 4:09 am
Re: Eureka Pattern Name
Then I will keep an eye out for you too. 
- galvanic1882
- Gold Tier

- Posts: 3532
- Joined: Tue Jun 28, 2005 10:39 am
- Location: Payson AZ
Re: Eureka Pattern Name
I checked all the old catalogs that I have copies of or the originals that I have and none call the knife a Eureka Pattern although there is one in an old Biddle hardware catalog dated 1908. I have attached a picture of the only one I own an etched Carrier Cutlery Eureka. It is not in the catalog that I have from Cronk & Carrier. I think it might be in and named in an old English Cutlery co like Rodgers?? Not sure but would like to know also.
- Attachments
-
- carrier bone 2 f.jpg (93.73 KiB) Viewed 2268 times
- Sauconian
- Posts: 1396
- Joined: Wed Aug 29, 2007 12:39 am
- Location: Northampton Co.,Pa.
Re: Eureka Pattern Name
Dayum Mike. You topped Charlie !
Gorgeous.
I wanna visit your house some day.
Fran
Gorgeous.
I wanna visit your house some day.
Fran
If it's meant for me to have it, it'll still be there.
- galvanic1882
- Gold Tier

- Posts: 3532
- Joined: Tue Jun 28, 2005 10:39 am
- Location: Payson AZ
Re: Eureka Pattern Name
Thanks Fran. What does Charlie have ????
- upnorth
- Posts: 2959
- Joined: Sun Oct 15, 2006 8:43 pm
- Location: Vancouver, Canada
Re: Eureka Pattern Name
Charlie Has!!! . .. . . . .drum roll!!!!!
no eurekas
Very nice Eureka Mike!! They don't get much better!! Thanks for sharing your findings to date. I'll post anything I find here.
If you hear rustling at your front door tonight, ignore it! It will just be your imagination!! Breaking glass??? You are dreaming!!! Revving pickup truck, hand waving; that's me!!!

Eureka means "I have found it!" in Greek!!
no eurekas
Very nice Eureka Mike!! They don't get much better!! Thanks for sharing your findings to date. I'll post anything I find here.
If you hear rustling at your front door tonight, ignore it! It will just be your imagination!! Breaking glass??? You are dreaming!!! Revving pickup truck, hand waving; that's me!!!
Eureka means "I have found it!" in Greek!!
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!
Johnnie Fain would have approved!
1949 - 2009
Johnnie Fain would have approved!
1949 - 2009
- Sauconian
- Posts: 1396
- Joined: Wed Aug 29, 2007 12:39 am
- Location: Northampton Co.,Pa.
Re: Eureka Pattern Name
Pssst...Eric ! Charlie's tonight. He's gonna' be outa' town.
Fran
Fran
If it's meant for me to have it, it'll still be there.
- jonet143
- Gold Tier

- Posts: 6922
- Joined: Fri Jun 23, 2006 3:33 am
- Location: w'ford-tejas
Re: Eureka Pattern Name
i have found examples of the pattern in three blade(cattle knife and whittler) but no named jacks except in levines. most of the cats. list numbers without naming patterns. tough one charlie. 
johnnie f 1949
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
- upnorth
- Posts: 2959
- Joined: Sun Oct 15, 2006 8:43 pm
- Location: Vancouver, Canada
Re: Eureka Pattern Name
Thanks for the effort, Johnnie! I'll get something eventually!
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!
Johnnie Fain would have approved!
1949 - 2009
Johnnie Fain would have approved!
1949 - 2009
- upnorth
- Posts: 2959
- Joined: Sun Oct 15, 2006 8:43 pm
- Location: Vancouver, Canada
Re: Eureka Pattern Name
That was fast!! My friend in Winsted, CT sent me this old Eureka Jack! It was obviously in transit when I posted my pathetic complaint of Eurekalessness
!
It has seen a life (a long one) of usefulness, but retains its pattern. I have seen so many knives from the turn of the century era with Ebony handles, I want to date this knife back then, but it is hard to pin down, like most. Certainly it's a rare and old pattern. The complexity of the handle shape makes it labor-intensive to finish, so fewer were made than straighter-sided jacks.
What a pleasant surprise!
It has seen a life (a long one) of usefulness, but retains its pattern. I have seen so many knives from the turn of the century era with Ebony handles, I want to date this knife back then, but it is hard to pin down, like most. Certainly it's a rare and old pattern. The complexity of the handle shape makes it labor-intensive to finish, so fewer were made than straighter-sided jacks.
What a pleasant surprise!
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!
Johnnie Fain would have approved!
1949 - 2009
Johnnie Fain would have approved!
1949 - 2009
- jonet143
- Gold Tier

- Posts: 6922
- Joined: Fri Jun 23, 2006 3:33 am
- Location: w'ford-tejas
Re: Eureka Pattern Name
and.....it's an empire!
great knife. i read on bf that even mr. levine did not know the answer. well, more research is needed. that pattern certainly gave way to more easily made patterns. too bad. 
johnnie f 1949
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
- 4ever3
- Posts: 582
- Joined: Sun Jan 08, 2006 10:31 pm
- Location: Ok