Pictures of Miscellaneous Stuff & Things

If you can think of something to talk about that is not related to knives, discuss it here.
Post Reply
User avatar
Quick Steel
Posts: 18339
Joined: Thu Dec 16, 2010 5:39 pm
Location: Lebanon, KY

Re: Pictures of Miscellaneous Stuff & Things

Post by Quick Steel »

What a great addition to your hobby. It not only looks good, but you incorporated necessities to make it highly functional, e.g. the airflow system. Well done bestgear. ::tu::
Waukonda
Gold Tier
Gold Tier
Posts: 6330
Joined: Sat Aug 31, 2019 1:35 am

Re: Pictures of Miscellaneous Stuff & Things

Post by Waukonda »

That structure is quite impressive. I hope you follow up with some pics of thriving plants in the near future.
Ike
User avatar
jerryd6818
Posts: 39458
Joined: Sun Jan 04, 2009 5:23 am
Location: Farther down the road.

Re: Pictures of Miscellaneous Stuff & Things

Post by jerryd6818 »

Well ain't you just the handyman. Whoulda thunk a software geek would know where his hands are and how to use 'em. Good job of it bub.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
User avatar
FRJ
Gold Tier
Gold Tier
Posts: 17123
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Pictures of Miscellaneous Stuff & Things

Post by FRJ »

A nice tidy little structure, Tom, and very purposeful.
I kind of wince at the pressure treated frame in that environment but it will suit you.
Joe
User avatar
Eustace
Posts: 1221
Joined: Sun Aug 20, 2017 6:26 am
Location: Bulgaria

Re: Pictures of Miscellaneous Stuff & Things

Post by Eustace »

For electricians
Attachments
bushon.jpg
User avatar
Eustace
Posts: 1221
Joined: Sun Aug 20, 2017 6:26 am
Location: Bulgaria

Re: Pictures of Miscellaneous Stuff & Things

Post by Eustace »

User avatar
philco
Gold Tier
Gold Tier
Posts: 15534
Joined: Sat Mar 22, 2008 9:32 pm
Location: Kentucky (Wildcat Country)

Re: Pictures of Miscellaneous Stuff & Things

Post by philco »

Nice work Tom. ::tu::
Phil
AAPK Administrator

Jesus died for you. Are you living for Him?

"Buy More Ammo!"
Johnnie Fain 1949-2009
User avatar
Steve Warden
Posts: 6883
Joined: Wed May 27, 2015 4:18 pm
Location: Cherry Hill, NJ

Re: Pictures of Miscellaneous Stuff & Things

Post by Steve Warden »

Eustace wrote: Fri Nov 29, 2019 9:10 pm For electricians
I'll admit to using a paperclip and foil for temporary fixes. :oops:
Take care and God bless,

Steve
TSgt USAF, Retired
1980-2000

But any knife is better than no knife! ~ Mumbleypeg (aka Ken)
User avatar
jerryd6818
Posts: 39458
Joined: Sun Jan 04, 2009 5:23 am
Location: Farther down the road.

Re: Pictures of Miscellaneous Stuff & Things

Post by jerryd6818 »

If we had a fuse blowing problem and couldn't find it, we would insert a screwdriver in place of the fuse and look for smoke. ::shrug:: :mrgreen:
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
doglegg
Gold Tier
Gold Tier
Posts: 23874
Joined: Mon Sep 18, 2017 2:35 am
Location: Grand Prairie, Texas

Re: Pictures of Miscellaneous Stuff & Things

Post by doglegg »

Jerry, working on traffic signals I learned that things electrical run on smoke. In every instance if you let the smoke out it quits working. ::nod::
User avatar
FRJ
Gold Tier
Gold Tier
Posts: 17123
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Pictures of Miscellaneous Stuff & Things

Post by FRJ »

doglegg wrote: Sat Nov 30, 2019 12:51 am Jerry, working on traffic signals I learned that things electrical run on smoke. In every instance if you let the smoke out it quits working. ::nod::
:lol:
Joe
User avatar
jerryd6818
Posts: 39458
Joined: Sun Jan 04, 2009 5:23 am
Location: Farther down the road.

Re: Pictures of Miscellaneous Stuff & Things

Post by jerryd6818 »

Dang Floyd. Sure wish I'd known that nugget of wisdom earlier when I was still working.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.

This country has become more about sub-groups than about it's unity as a nation.

"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
User avatar
WillyCamaro
Posts: 6185
Joined: Thu Jan 10, 2019 4:03 am
Location: Yorkton, Saskatchewan

Re: Pictures of Miscellaneous Stuff & Things

Post by WillyCamaro »

::rotflol::
John 3:16

Romans 8:1
User avatar
TPK
Posts: 11015
Joined: Sun Mar 31, 2019 6:16 pm
Location: Bayern, Germany
Contact:

Re: Pictures of Miscellaneous Stuff & Things

Post by TPK »

bestgear wrote: Fri Nov 29, 2019 5:44 pm Just wrapped-up my final autumn project, a mini-greenhouse. I had a small space behind my shed and a mature white oak to build a south-facing 4' x 4' mini-greenhouse out of pressure treated lumber and a 5mm material called solexx (http://www.solexx.com/why-solexx.html). The roof is hinged at the top so that it can open about 4" above the doorway to let hot air out. The back (north side) has a 1' screen at the bottom that can be open and closed from the inside to let cool air in. So far, the temperature has been about 15 degrees higher inside vs. outside with no ventilation. The ten 1020 trays hold 15 3-1/2" pots each so I'll be able to raise at least 150 vegetables, herbs and flowers for our outside gardens next Spring! I'm taking my gardening hobby to a new level - thanks for taking a peek.
Hi Tom,

You did a mighty fine job on your new greenhouse! ::tu:: Well thought out & funktional. I won't show it to my wife though or I'll have something new on my Honey-Do-List. ::facepalm::

It's none of my business but If you can get it up off the ground, it would last ya a lot longer. In carpenter school they taught us to try to keep wood 30cm. off the ground (about one foot). That's what the Germans called "constructive & architectural protection".
Six cement blocks would do the trick. But even some run of the mill red bricks would help. Any distance to the ground is a posative plus. And while your at it, if you place some tarpaper between the bricks or blocks & the wood, it will keep moisture from raising up from the ground, through the bricks into the wood. ::tu:: Like I said before, it's none of my business, just a tip. ::handshake:: You did a fine job on that greenhouse though! Thanks for the pictures. ::super_happy::

Another Tom
TOM - KGFG - (Knife-Guy-From-Germany)

I believe..., every knife is a soul, looking for a soulmate. :wink:

Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano

US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
User avatar
bestgear
Silver Tier
Silver Tier
Posts: 6226
Joined: Tue Apr 17, 2012 6:58 pm
Location: Oak Island NC
Contact:

Re: Pictures of Miscellaneous Stuff & Things

Post by bestgear »

TPK wrote: Sat Nov 30, 2019 8:04 amIf you can get it up off the ground, it would last ya a lot longer.
Thanks for the great feedback Tom, your suggestions were actually considered when I was designing the greenhouse. I've attached a picture of the structure under the greenhouse (the cavity was filled with sand to become the greenhouse floor). I poured high-strength concrete into the four 8" tubes at the corners that are 4' deep and set in 3/4" bolts which are connected to the 4"x4" pressure-treated frame. I've always believed that ground contact with pressure treated lumber is an acceptable building practice although I've recently come to learn that not all pressure treated lumber is created equally. I purchased certified ground contact southern yellow pine so hopefully I've taken every precaution I could to ensure at least 25 years (my lifetime).

I truly do appreciate all of the feedback on my mini-greenhouse and I promise to share the progress as Spring approaches.
Attachments
GH Foundation 1.jpg
Tom
AAPK Administrator
https://www.tcjr-leatherworks.com
User avatar
TPK
Posts: 11015
Joined: Sun Mar 31, 2019 6:16 pm
Location: Bayern, Germany
Contact:

Re: Pictures of Miscellaneous Stuff & Things

Post by TPK »

bestgear wrote: Sat Nov 30, 2019 1:33 pm
TPK wrote: Sat Nov 30, 2019 8:04 amIf you can get it up off the ground, it would last ya a lot longer.
Thanks for the great feedback Tom, your suggestions were actually considered when I was designing the greenhouse. I've attached a picture of the structure under the greenhouse (the cavity was filled with sand to become the greenhouse floor). I poured high-strength concrete into the four 8" tubes at the corners that are 4' deep and set in 3/4" bolts which are connected to the 4"x4" pressure-treated frame. I've always believed that ground contact with pressure treated lumber is an acceptable building practice although I've recently come to learn that not all pressure treated lumber is created equally. I purchased certified ground contact southern yellow pine so hopefully I've taken every precaution I could to ensure at least 25 years (my lifetime).

I truly do appreciate all of the feedback on my mini-greenhouse and I promise to share the progress as Spring approaches.
Sounds like you put some hard work into anchoring it down, guess that rules out raising it up. ::super_happy:: You should be alright with the pressure treated southern yellow pine though. Wikipedia said this about souther yellow pine: "They are also used for wooden roller coasters and are most used for utility poles throughout the United States". If it's used for utility poles & it's pressure treated, you'll be just fine. ::tu::

Could you explain the sand to me. Maybe I can learn something. ::shrug:: Is it good for the greenhouse climate or does it store the heat or is it just simply a frame filler? ::shrug::
TOM - KGFG - (Knife-Guy-From-Germany)

I believe..., every knife is a soul, looking for a soulmate. :wink:

Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano

US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
User avatar
bestgear
Silver Tier
Silver Tier
Posts: 6226
Joined: Tue Apr 17, 2012 6:58 pm
Location: Oak Island NC
Contact:

Re: Pictures of Miscellaneous Stuff & Things

Post by bestgear »

TPK wrote: Sat Nov 30, 2019 4:01 pmCould you explain the sand to me. Maybe I can learn something. ::shrug:: Is it good for the greenhouse climate or does it store the heat or is it just simply a frame filler? ::shrug::
the 4” sand floor is intended to hold heat overnight when outside temperatures are still cool. I’m not 100% sold on the idea but at a minimum it’s a frame filler as you said. Time will tell - an interesting addition to my horticulture hobby. Tom
Tom
AAPK Administrator
https://www.tcjr-leatherworks.com
User avatar
TPK
Posts: 11015
Joined: Sun Mar 31, 2019 6:16 pm
Location: Bayern, Germany
Contact:

Re: Pictures of Miscellaneous Stuff & Things

Post by TPK »

bestgear wrote: Sat Nov 30, 2019 5:04 pm
TPK wrote: Sat Nov 30, 2019 4:01 pmCould you explain the sand to me. Maybe I can learn something. ::shrug:: Is it good for the greenhouse climate or does it store the heat or is it just simply a frame filler? ::shrug::
the 4” sand floor is intended to hold heat overnight when outside temperatures are still cool. I’m not 100% sold on the idea but at a minimum it’s a frame filler as you said. Time will tell - an interesting addition to my horticulture hobby. Tom
Ok cool. I'll try to remember that with the sand holding the heat for a while. I believe that could work. ::tu:: If I ever build one I'll consider that. I wish you happy growing & a green thumb! :mrgreen:

Take care,
Tom
TOM - KGFG - (Knife-Guy-From-Germany)

I believe..., every knife is a soul, looking for a soulmate. :wink:

Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano

US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
User avatar
cudgee
Posts: 6930
Joined: Thu May 16, 2019 7:21 am
Location: Victoria. Australia.

Re: Pictures of Miscellaneous Stuff & Things

Post by cudgee »

TPK wrote: Sat Nov 30, 2019 5:48 pm
bestgear wrote: Sat Nov 30, 2019 5:04 pm
TPK wrote: Sat Nov 30, 2019 4:01 pmCould you explain the sand to me. Maybe I can learn something. ::shrug:: Is it good for the greenhouse climate or does it store the heat or is it just simply a frame filler? ::shrug::
the 4” sand floor is intended to hold heat overnight when outside temperatures are still cool. I’m not 100% sold on the idea but at a minimum it’s a frame filler as you said. Time will tell - an interesting addition to my horticulture hobby. Tom
Ok cool. I'll try to remember that with the sand holding the heat for a while. I believe that could work. ::tu:: If I ever build one I'll consider that. I wish you happy growing & a green thumb! :mrgreen:

Take care,
Tom
I sent you a PM yesterday, do not know if you received it, i seem to have trouble sending them. ::hmm::
User avatar
TPK
Posts: 11015
Joined: Sun Mar 31, 2019 6:16 pm
Location: Bayern, Germany
Contact:

Re: Pictures of Miscellaneous Stuff & Things

Post by TPK »

cudgee wrote: Sat Nov 30, 2019 7:02 pm
TPK wrote: Sat Nov 30, 2019 5:48 pm
bestgear wrote: Sat Nov 30, 2019 5:04 pm the 4” sand floor is intended to hold heat overnight when outside temperatures are still cool. I’m not 100% sold on the idea but at a minimum it’s a frame filler as you said. Time will tell - an interesting addition to my horticulture hobby. Tom
Ok cool. I'll try to remember that with the sand holding the heat for a while. I believe that could work. ::tu:: If I ever build one I'll consider that. I wish you happy growing & a green thumb! :mrgreen:

Take care,
Tom
I sent you a PM yesterday, do not know if you received it, i seem to have trouble sending them. ::hmm::
Hi my friend,
Nope! Never got it. Try an E-Mail. I don't check my mails very often but if I know your sending one, I'll check em. ::tu::
TOM - KGFG - (Knife-Guy-From-Germany)

I believe..., every knife is a soul, looking for a soulmate. :wink:

Weebit-Nano https://www.weebit-nano.com/
https://en.m.wikipedia.org/wiki/Weebit_Nano

US - ARMY - COMBAT - ENGINEERS - 1990 - 1993 - God Bless Our Troops!
User avatar
dlr110
Gold Tier
Gold Tier
Posts: 6448
Joined: Sat Nov 05, 2016 4:24 am
Location: Ponder, Texas

Re: Pictures of Miscellaneous Stuff & Things

Post by dlr110 »

Eustace wrote: Fri Nov 29, 2019 9:10 pm For electricians
::clapping:: ::rotflol:: ::clapping:: ::rotflol::
David Roberts
U.S. Navy and D/FW International Airport Board Retired
Prayer Changes Everything
Montanaman

Re: Pictures of Miscellaneous Stuff & Things

Post by Montanaman »

Cleopatra out helping with the pigs in the snow this morning,
aapkcleo121.jpg
User avatar
edge213
Gold Tier
Gold Tier
Posts: 8451
Joined: Sat Jan 25, 2014 12:48 am
Location: The Crossroads of America

Re: Pictures of Miscellaneous Stuff & Things

Post by edge213 »

Montanaman wrote: Sun Dec 01, 2019 4:21 pm Cleopatra out helping with the pigs in the snow this morning,

aapkcleo121.jpg
That's a beautiful dog.
David
"Glowing like the metal on the edge of a knife" Meat Loaf
doglegg
Gold Tier
Gold Tier
Posts: 23874
Joined: Mon Sep 18, 2017 2:35 am
Location: Grand Prairie, Texas

Re: Pictures of Miscellaneous Stuff & Things

Post by doglegg »

I bet it could sleep in the snow and not get cold. That is a big and beautiful dog. I also bet it protects those little girls. ::tu:: ::nod::
Montanaman

Re: Pictures of Miscellaneous Stuff & Things

Post by Montanaman »

edge213 wrote: Sun Dec 01, 2019 4:32 pm That's a beautiful dog.
doglegg wrote: Sun Dec 01, 2019 9:51 pm I bet it could sleep in the snow and not get cold. That is a big and beautiful dog. I also bet it protects those little girls. ::tu:: ::nod::
Thank you both, she is a great dog. Yep doglegg, she always knows where the girls are. I have been on 10 hour alpine climbs where she has made a snow bed and waited for us to come down. Malamutes fur is very dense.
Post Reply

Return to “General Off Topic Discussion”