Holley Manufacturing Company A.D. 1844
- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Holley Manufacturing Company A.D. 1844
Holley claimed they were the earliest knife manufacturer in the U.S., maybe. There was another company making knives earlier, of all places in the state of Maine, but I cannot find any evidence they made pocket knives just kitchen knives and the like. In any case they are one of the earliest makers of pocket cutlery in this country.
The quality from beginning,(1844), till their end 1930`s?, was very high.
If you have ever held one in your hands and examined it carefully you would certainly agree. I have been fortunate to own several over the years and I have not seen one I did not like yet. They made virtually every pattern know at the time, there are in existence several photo cards showing the actual knives they displayed in the worlds fair and very deservingly won gold medals for manufacturing them.
There is a lot of information already online and in books documenting their history from inception till their demise so I won`t go into detail here.
I was lucky to find this one recently, a lock back hunter, and it renewed my interest in this company and their fine knives. Some of the others I have posted before but will include them here for posterity.
What I would like is to see are any knives you may have in your collection made by Holley, good or bad I like `em all.
The quality from beginning,(1844), till their end 1930`s?, was very high.
If you have ever held one in your hands and examined it carefully you would certainly agree. I have been fortunate to own several over the years and I have not seen one I did not like yet. They made virtually every pattern know at the time, there are in existence several photo cards showing the actual knives they displayed in the worlds fair and very deservingly won gold medals for manufacturing them.
There is a lot of information already online and in books documenting their history from inception till their demise so I won`t go into detail here.
I was lucky to find this one recently, a lock back hunter, and it renewed my interest in this company and their fine knives. Some of the others I have posted before but will include them here for posterity.
What I would like is to see are any knives you may have in your collection made by Holley, good or bad I like `em all.
AAPK Janitor
369
369
- jerryd6818
- Gold Tier
- Posts: 39428
- Joined: Sun Jan 04, 2009 5:23 am
- Location: Farther down the road.
Re: Holley Manufacturing Company A.D. 1844
Dimitri, I've never seen a Holly up for sale and I doubt I could afford it if I did. This is a great posting of some beautiful old knives. Thanks.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Holley Manufacturing Company A.D. 1844
Thanks for looking Jerry, I appreciate the feedback



AAPK Janitor
369
369
-
- Gold Tier
- Posts: 3923
- Joined: Mon Jul 24, 2006 3:19 pm
Re: Holley Manufacturing Company A.D. 1844
Dimitri, I owned one and traded it. My mistake!!
Harold
Harold
- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Holley Manufacturing Company A.D. 1844
Been there Harold
You still have a picture of it?

You still have a picture of it?
AAPK Janitor
369
369
- peanut740
- Gold Tier
- Posts: 7889
- Joined: Fri Jan 23, 2009 2:32 pm
- Location: Ohio, along the river
- Contact:
-
- Posts: 2538
- Joined: Mon Apr 03, 2006 6:48 pm
Re: Holley Manufacturing Company A.D. 1844
Nice knives, Dimitri
I have a couple that I have had for several years. Could never bring myself to sell them.
Tom

I have a couple that I have had for several years. Could never bring myself to sell them.
Tom
- carrmillus
- Gold Tier
- Posts: 6293
- Joined: Sun Nov 14, 2010 9:22 pm
- Location: tupelo, miss.
Re: Holley Manufacturing Company A.D. 1844
...I still want to see one of the holley charter oak knives??...anybody ever seen one??..I read somewhere it's supposed to be the rarest collectible knife there is!!......
...........

- danno50
- Gold Tier
- Posts: 3773
- Joined: Mon Jan 12, 2009 12:05 am
- Location: Saskatchewan, Canada
Re: Holley Manufacturing Company A.D. 1844
Nice old knives, Dimitri, great find on the hunter! I also really like the photo of the lineup of old Holley knives.
Dan
Dan
Dan
- RobesonsRme.com
- Posts: 10077
- Joined: Wed Jan 28, 2009 3:44 pm
- Location: The Heart of Dixie.
- Contact:
Re: Holley Manufacturing Company A.D. 1844
I had a very nice large frame Holley coke bottle jack with a beautiful, but grey, heavy sabre-cut clip blade. I got it at a trade day in northeast Alabama and eventually traded it to Joe Seale for a Robeson toothpick in mint condition.
There was a knife on Ebay some time back purporting to be a Charter Oak. It certainly did look like one. They wanted major dollars for it, but I do not think it sold.
We discussed it here extensively and I'm pretty sure the Ebay photos wee posted as well.
As far as I know, no Holley knife has ever been found with the Salisbury tang stamp. Lakeville was originally Salisbury and Holley started before the date of the name change.
I think a Salisbury marked knife would eclipse a Charter Oak.
Charlie
There was a knife on Ebay some time back purporting to be a Charter Oak. It certainly did look like one. They wanted major dollars for it, but I do not think it sold.
We discussed it here extensively and I'm pretty sure the Ebay photos wee posted as well.
As far as I know, no Holley knife has ever been found with the Salisbury tang stamp. Lakeville was originally Salisbury and Holley started before the date of the name change.
I think a Salisbury marked knife would eclipse a Charter Oak.
Charlie
DE OPPRESSO LIBER
"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "
Sidlow Baxter
"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "
Sidlow Baxter
- Colonel26
- Bronze Tier
- Posts: 10404
- Joined: Sun Jul 01, 2012 3:35 am
- Location: Kentucky
Re: Holley Manufacturing Company A.D. 1844
Very nice looking knives. Like Jerry I've never seen one in the flesh, but I sure do like looking at y'all's pictures!
“There are things in the old Book which I may not be able to explain, but I fully accept it as the infallible word of God, and receive its teachings as inspired by the Holy Spirit.”
Robert E. Lee
Robert E. Lee
- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Holley Manufacturing Company A.D. 1844
Here you go Tommy:carrmillus wrote:.I still want to see one of the holley charter oak knives??...anybody ever seen one??..I read somewhere it's supposed to be the rarest collectible knife there is!!......
http://www.allaboutpocketknives.com/kni ... 35&t=38816
I personally looked at this knife from the guy that listed it on e-bay at our local knife show in 2013 or last year IIRC. The knife is legit as far as I am concerned and it was a pleasure to be able to examine one in hand.
AAPK Janitor
369
369
- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Holley Manufacturing Company A.D. 1844
Thanks!peanut740 wrote:MB those are topshelf.
I don`t blame you Tom, I would hang on to them myselfolderdogs1 wrote:Nice knives, Dimitri
I have a couple that I have had for several years. Could never bring myself to sell them.
Tom


Thanks Dan, that is quite a line up of knives in that photo!danno50 wrote:Nice old knives, Dimitri, great find on the hunter! I also really like the photo of the lineup of old Holley knives.
Dan
AAPK Janitor
369
369
- carrmillus
- Gold Tier
- Posts: 6293
- Joined: Sun Nov 14, 2010 9:22 pm
- Location: tupelo, miss.
Re: Holley Manufacturing Company A.D. 1844
...the tree was blown down in a storm in 1856, and I read somewhere that holley obtained some of the wood to make the charter oak knives?????............Miller Bro`s wrote:Here you go Tommy:carrmillus wrote:.I still want to see one of the holley charter oak knives??...anybody ever seen one??..I read somewhere it's supposed to be the rarest collectible knife there is!!......
http://www.allaboutpocketknives.com/kni ... 35&t=38816
I personally looked at this knife from the guy that listed it on e-bay at our local knife show in 2013 or last year IIRC. The knife is legit as far as I am concerned and it was a pleasure to be able to examine one in hand.

- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
- btrwtr
- Gold Tier
- Posts: 5206
- Joined: Thu May 24, 2012 11:53 am
Re: Holley Manufacturing Company A.D. 1844
Loved the aged handles on that lockback hunter Dimitri. Beautiful knife.
Wayne
Wayne
If I have seen further it is by standing on the shoulders of giants.
Wayne
Please visit My AAPK store https://www.allaboutpocketknives.com/catalog/btrwtr
Wayne
Please visit My AAPK store https://www.allaboutpocketknives.com/catalog/btrwtr
- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Holley Manufacturing Company A.D. 1844
Here is another large knife, 4 3/4" closed.
Can you tell I don`t like to polish `em?
Can you tell I don`t like to polish `em?

AAPK Janitor
369
369
- LongBlade
- Posts: 3416
- Joined: Mon May 18, 2015 3:00 pm
- Location: Woods of CT
Re: Holley Manufacturing Company A.D. 1844
Great thread MB and beautiful Holleys posted so far...
I'll throw this Holley Ebony Hunter up though it is also posted under the Traditional Hunters thread so just 2 photos here - This Hunter is the twin "wooden legged" brother of MB's ivory handled knife just above - even the shield... but mine has a lanyard hole...
MB - Check the blade on this old folding lock back dirk (this was made to be a dirk based on fit in liners and I don't believe it was sharpened down to look like a dirk - look at swedge) - integral liners with bolster on this one but no tang stamp that I can find.. nice worn stag handles - doesn't that blade look similar to the first one you posted?? Long swedge and nail nick very similar... does that Holley by chance have integral liners and bolsters?? I always assumed mine was Sheffield made based on the liners/bolster... I did find this on a local hunt in CT though
Have at least 3 more Holleys but need to get photos.. just realized I never took photos of them yet
... anyway once things settle abit over the holidays I'll get them done and up here...

I'll throw this Holley Ebony Hunter up though it is also posted under the Traditional Hunters thread so just 2 photos here - This Hunter is the twin "wooden legged" brother of MB's ivory handled knife just above - even the shield... but mine has a lanyard hole...
MB - Check the blade on this old folding lock back dirk (this was made to be a dirk based on fit in liners and I don't believe it was sharpened down to look like a dirk - look at swedge) - integral liners with bolster on this one but no tang stamp that I can find.. nice worn stag handles - doesn't that blade look similar to the first one you posted?? Long swedge and nail nick very similar... does that Holley by chance have integral liners and bolsters?? I always assumed mine was Sheffield made based on the liners/bolster... I did find this on a local hunt in CT though

Have at least 3 more Holleys but need to get photos.. just realized I never took photos of them yet

____________________________________________________________________________
Lee
Lee
- wlf
- Gold Tier
- Posts: 5965
- Joined: Thu Mar 24, 2011 2:55 am
- Location: WV
Re: Holley Manufacturing Company A.D. 1844
Good to see you Dimitri,happy Christmas to me.Great thraed.
I'll get to posting a couple.Here is one now,but the other I don't have pictured yet.
I think this is the only farmers jack I have( or seen) with the nail notch for the spey (budding blade) blade.I'd love to have the other two listed,especially the one with pruner, budding,and pen blade.My new quest.
In the regular pruner section of the catalog,a slim version of the larger pruning blades is called a peach pruning blade.
I'll get to posting a couple.Here is one now,but the other I don't have pictured yet.
I think this is the only farmers jack I have( or seen) with the nail notch for the spey (budding blade) blade.I'd love to have the other two listed,especially the one with pruner, budding,and pen blade.My new quest.

In the regular pruner section of the catalog,a slim version of the larger pruning blades is called a peach pruning blade.
I buy roosters combs and farmers..........................................................jack knives [/b]
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle
- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Holley Manufacturing Company A.D. 1844
That one has Sheffield written all over it and early too, nice knifeLongBlade wrote:MB - Check the blade on this old folding lock back dirk (this was made to be a dirk based on fit in liners and I don't believe it was sharpened down to look like a dirk - look at swedge) - integral liners with bolster on this one but no tang stamp that I can find.. nice worn stag handles - doesn't that blade look similar to the first one you posted?? Long swedge and nail nick very similar... does that Holley by chance have integral liners and bolsters?? I always assumed mine was Sheffield made based on the liners/bolster...

No, the Holley I posted does not have integral bolsters/liners.
I really like the ebony handle hunter you posted Lee, can`t wait to see the others you have!

AAPK Janitor
369
369
- Miller Bro's
- Gold Tier
- Posts: 12752
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Holley Manufacturing Company A.D. 1844
Nice to see you too again Lyle
That`s a real beauty, and a rare pattern to find with a Holley stamp!
Keep your eyes open and your fingers crossed for finding the other two patterns, there out there somewhere

That`s a real beauty, and a rare pattern to find with a Holley stamp!
Keep your eyes open and your fingers crossed for finding the other two patterns, there out there somewhere

AAPK Janitor
369
369
- djknife13
- Gold Tier
- Posts: 7377
- Joined: Sun Oct 13, 2013 6:28 pm
- Location: Northern Minnesota
Re: Holley Manufacturing Company A.D. 1844
Longblade the stag is incredible on that dirk. It is so impressive that I believe I remember seeing it before on another thread (and at my age I don't remember much) and Lyle that Farmers jack is beautiful. I have a few Holleys I'll have to get pictures of. One of my favorite knives is a Holley Rip Van Winkle that I showed a catalog picture of to my wife as my dream knife that I would never own, and 6 months later I stumbled into one and didn't have to mortgage anything to get it.__Dave
- Beechtree
- Posts: 910
- Joined: Fri May 04, 2012 8:17 pm
Re: Holley Manufacturing Company A.D. 1844
Great knives all, this is a wonderful holiday thread. Dimitri, I have never before seen any pictures of the 1876 display that you posted. That is wonderful. I would love to see the whole thing!!!
"A tool is but an extension of a man's hand." -Henry Ward Beecher
- wlf
- Gold Tier
- Posts: 5965
- Joined: Thu Mar 24, 2011 2:55 am
- Location: WV
Re: Holley Manufacturing Company A.D. 1844
Beechtree wrote:Great knives all, this is a wonderful holiday thread. Dimitri, I have never before seen any pictures of the 1876 display that you posted. That is wonderful. I would love to see the whole thing!!!
Me too.
I buy roosters combs and farmers..........................................................jack knives [/b]
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle
GEC SFOs and others at LICK CREEK CUTLERY- www.allaboutpocketknives.com/wlf
May the Father and Son bless
Lyle