Is this a good deal of Remingtons?

A place to ask or answer knife related questions.
Post Reply
mikekoz
Posts: 156
Joined: Mon Jan 01, 2007 10:04 pm

Is this a good deal of Remingtons?

Post by mikekoz »

I was going to purchase this set of Remington's off Ebay and thought I would get a few opinions from the experts! The buyer states that these are made in the USA. Can anybody tell by looking at them if they are the real deal, or a good deal in general!! Thank you all in advance!!

http://cgi.ebay.com/Remington-Knife-Set ... dZViewItem
mikekoz
Posts: 156
Joined: Mon Jan 01, 2007 10:04 pm

Re: Is this a good deal of Remingtons?

Post by mikekoz »

mikekoz wrote:I was going to purchase this set of Remington's off Ebay and thought I would get a few opinions from the experts! The buyer states that these are made in the USA. Can anybody tell by looking at them if they are the real deal, or a good deal in general!! Thank you all in advance!!

http://cgi.ebay.com/Remington-Knife-Set ... dZViewItem
Sorry for the poor English on the title! It should say ON Remington's, not of Remington's...;(. I also do not know how my post was duplicated???
User avatar
johnnierotten
Posts: 9303
Joined: Sun Jul 23, 2006 3:29 am
Location: Tucson AZ.

Post by johnnierotten »

I don't see were he says there US..

I believe if they were US his buy it know price would be a H*ll of a lot more..IMO
johnnierotten

So far,So good...So What!!
mikekoz
Posts: 156
Joined: Mon Jan 01, 2007 10:04 pm

Post by mikekoz »

johnnierotten wrote:I don't see were he says there US..

I believe if they were US his buy it know price would be triple or more.IMO
I asked the buyer direct and he told me they were US made knives.
User avatar
johnnierotten
Posts: 9303
Joined: Sun Jul 23, 2006 3:29 am
Location: Tucson AZ.

Post by johnnierotten »

I highly doubt it Bro,I think there made in China.
johnnierotten

So far,So good...So What!!
User avatar
jonet143
Gold Tier
Gold Tier
Posts: 6922
Joined: Fri Jun 23, 2006 3:33 am
Location: w'ford-tejas

Post by jonet143 »

hey mike, i think you're double clicking submit on your posts.
johnnie f 1949

on the cutting edge is sometimes not the place to be.
please support our troops - past and present
if not a member...join the NKCA! they're on our side.
User avatar
justold52
Posts: 4459
Joined: Tue Aug 01, 2006 2:47 am
Location: Bloomington, ILL the sick state

Post by justold52 »

Says this (""Friends of the NRA"") 25 available
That does not mean National Riffle Association at all.
Stay away from this IMO.
A sign In a Chinese Pet Store: 'Buy one dog, get one flea.'
User avatar
agteacher2
Posts: 402
Joined: Sat May 28, 2005 1:04 am
Location: Athens, TX

Post by agteacher2 »

I found these at Blue Ridge knives??????


Item: R566
Description: Remington Big Game Delrin Stag. R3 pattern. Double lockback design.
5" closed. 440A stainless large clip blade and utility saw blade with rip hook. Lanyard hole. Delrin stag handles with nickel silver bolsters and inlay shield. Leather belt sheath.

Country of Origin: USA


Item: R567
Description: Remington Gent's Delrin Stag. R5 pattern. 3 1/8" closed lockback. 440A stainless drop point blade. Delrin stag handles with single nickel silver bolster and inlay shield.

Country of Origin: USA
Attachments
R567.jpg
R567.jpg (9.9 KiB) Viewed 3632 times
R566.jpg
R566.jpg (12.37 KiB) Viewed 3632 times
Jeff Jones
Athens, TX

www.Jonescutlery.com
User avatar
El Lobo
Gold Tier
Gold Tier
Posts: 3036
Joined: Tue Dec 14, 2004 4:47 pm
Location: Arizona, right here in the U.S. of A.

Post by El Lobo »

Hi mikekoz,

What do you mean by the "Real Deal?"
Remington hasn't made any knives since the 1940s...so they aren't the real deal.
Most modern Remingtons were made by Camillus.
Some may have been made recently by United (Arrowhead), as well...so these could be a factory/distributor dump of merchandise after United's Chapter 11.
Or, still possibly made offshore, if the seller isn't being square.

Not likely to go up much in value...IMO. Could be ok users.

Bill

EDITED: For clarity.
Please visit the Member Stores here at AAPK, including my store.....GET AN EDGE!
http://www.allaboutpocketknives.com/getanedge
User avatar
johnnierotten
Posts: 9303
Joined: Sun Jul 23, 2006 3:29 am
Location: Tucson AZ.

Post by johnnierotten »

If there actually made in the US, I'll buy a set or 2. Its hard for me to believe that 3 US made knives of any brand are selling for $40 ......If they are the Remingtons that are made by Camillus I will definitely buy a set. Thats a swinging deal. ::tu::


PS,theres a new line of Remingtons made in Italy also.
johnnierotten

So far,So good...So What!!
mikekoz
Posts: 156
Joined: Mon Jan 01, 2007 10:04 pm

Post by mikekoz »

johnnierotten wrote:If there actually made in the US, I'll buy a set or 2. Its hard for me to believe that 3 US made knives of any brand are selling for $40 ......If they are the Remingtons that are made by Camillus I will definitely buy a set. Thats a swinging deal. ::tu::


PS,theres a new line of Remingtons made in Italy also.
I asked the seller to look on the blades and he again told me they were made in the USA! He stated that was on the kniives and the box! I have purchased a set from him and will post photos of the knives when they arrive. I will be the groups guinea pig on these!!...;). I should have them in a few days.
User avatar
johnnierotten
Posts: 9303
Joined: Sun Jul 23, 2006 3:29 am
Location: Tucson AZ.

Post by johnnierotten »

Cool Bro,keep us informed. ::tu::
johnnierotten

So far,So good...So What!!
mikekoz
Posts: 156
Joined: Mon Jan 01, 2007 10:04 pm

Are these worth $50.00???

Post by mikekoz »

johnnierotten wrote:Cool Bro,keep us informed. ::tu::
OK! Just got them UPS today!! They look good to me, but I am a rookie!..;). These appear to be current model USA made Remingtons. Please look at the photos. I sure hope this set is not a fake!!...;(. That is why I am posting this so all of you experts can analyze them!! Thank you in advance!!!
Attachments
RemingtonSet 007.jpg
RemingtonSet 006.jpg
RemingtonSet 005.jpg
RemingtonSet 004.jpg
RemingtonSet 003.jpg
RemingtonSet 002.jpg
RemingtonSet 001.jpg
User avatar
johnnierotten
Posts: 9303
Joined: Sun Jul 23, 2006 3:29 am
Location: Tucson AZ.

Post by johnnierotten »

They look great to me. ::tu:: I found the 2 blade for $50,the single blade for $29.I couldn't find the 3 Blade stockman anywhere,but my guess would be somewhere around $40 ....You got approx.$120 worth of knives for $50....you did good!!

I saved his ebay ID,I think I will see if he will cut me a deal on a couple of these sets. Thanks Bro ::tu::
johnnierotten

So far,So good...So What!!
User avatar
El Lobo
Gold Tier
Gold Tier
Posts: 3036
Joined: Tue Dec 14, 2004 4:47 pm
Location: Arizona, right here in the U.S. of A.

Post by El Lobo »

Great find... ::tu::

Looks like a distributor dump of otherwise nice product. Maybe the newer knives from Arrowhead/United?

Bill
Please visit the Member Stores here at AAPK, including my store.....GET AN EDGE!
http://www.allaboutpocketknives.com/getanedge
User avatar
MITCH RAPP
Posts: 4184
Joined: Sun Jul 24, 2005 5:49 pm
Location: Southern California

Post by MITCH RAPP »

8) mikeoz; Looks like you got three real good users, at a super

price. ::tu::
Post Reply

Return to “Knife Related Q&A”