Eagle Knife Company

[New_Windsor_NY]

That's.....

Thank you, Dimitri.

[New_Windsor_NY]

Very recently, my trip to the post office produced this pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 3 3/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO (over) PAT. PEND (over) MADE IN USA" This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. Overall, this is my thirtieth, EAGLE KNIFE COMPANY pocket knife. ALL twenty-nine of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. The main blade does have a WEAK half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. Overall, this pocket knife is in EXCELLENT condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[New_Windsor_NY]

Yesterday afternoon, my visit to the post office produced this pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE CO" This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. Overall, this is my thirty-first, EAGLE KNIFE COMPANY pocket knife. ALL thirty of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. The main blade does have a GOOD half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. This pocket knife is in VERY GOOD condition. This pocket knife did NOT need any cleaning. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[bestgear]

Yesterday……

you’ve cornered the market on this brand Skip, congratulations on your latest find!

[New_Windsor_NY]

you’ve.....

Thank you, Tom.

[New_Windsor_NY]

A couple of days ago, my trip to the post office produced this pocket knife. This pocket knife now becomes my most recent example to be posted under this topic or thread. This pocket knife also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE CO" This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. Overall, this is my thirty-second, EAGLE KNIFE COMPANY pocket knife. ALL thirty-one of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. The main blade does have a WEAK half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. Overall, this pocket knife is in GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[Miller Bro's]

[New_Windsor_NY]

Thank you, Dimitri.

[New_Windsor_NY]

Yesterday morning, my visit to the post office produced this pocket knife. This pocket knife now becomes my latest example to be posted under this topic or thread. This pocket knife also became the latest example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE CO" This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. Overall, this is my thirty-third, EAGLE KNIFE COMPANY pocket knife. ALL thirty-two of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. This pocket knife is definitely NOT my nicest looking example. I do NOT obtain THESE pocket knives for their appearance. This pocket knife is in GOOD condition. This pocket knife did need a VERY MINOR cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[New_Windsor_NY]

This morning, my trip to the post office produced this advertising pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, advertising, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE Co" The main handle side says, "ROBINSON BOYS SHOES" The other handle side says nothing, it is blank. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. This is only my third EAGLE KNIFE CO pocket knife that has advertising on it. Overall, this is my thirty-fourth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-three of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. The main blade does have a GOOD half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. This pocket knife is in EXCELLENT condition. This pocket knife did NOT require cleaning. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[New_Windsor_NY]

This morning, my visit to the post office produced this pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), two blades, two tang stamps, 3 3/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO (over) PAT. PEND (over) MADE IN USA" The secondary blade front tang stamp says, "EAGLE KNIFE CO (over) PAT. PEND (over) MADE IN USA" Overall, this is my thirty-fifth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-four of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This is my sixth, EAGLE KNIFE COMPANY pocket knife, that has two blades. The main blade appears to have been reshaped. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. The secondary blade does have a GOOD half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a VERY GOOD closing snap. Overall, this pocket knife is in FAIR condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[New_Windsor_NY]

A couple of days ago, my trip to the post office produced this pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 3 3/8" closed, one spring, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO. (over) PAT. PEND (over) MADE IN USA." This is my thirty-sixth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-five of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does have a GOOD half stop. The main blade does have a GOOD opening snap. The main blade does have a VERY GOOD closing snap. This pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[Miller Bro's]

This pocket knife is in VERY GOOD condition.

I'll say!

[New_Windsor_NY]

I'll.....

Thank you, Dimitri.

[New_Windsor_NY]

Yesterday morning, my visit to the post office produced this pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), two blades, one tang stamp, 3 3/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO (over) PAT. OCT. 1.18 (over) MADE IN USA" This is my seventh, EAGLE KNIFE COMPANY pocket knife, that has two blades. This is my thirty-seventh, EAGLE KNIFE COMPANY pocket knife. ALL thirty-six of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade appears to have been reshaped. The main blade does have a GOOD half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. The secondary blade does have a GOOD half stop. The secondary blade does NOT have an opening snap. The secondary blade does NOT have a closing snap. This pocket knife is in GOOD condition. This pocket knife did NOT need cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I found the remains of a cigarette tax revenue stamp.
It was in the well of the main blade. See the LAST picture below.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[New_Windsor_NY]

A couple of days ago, my trip to the post office produced this advertising pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, advertising, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE CO" The main handle side says, "WEAR RED GOOSE SHOES" The other handle side says nothing, it is blank. This is only my fourth EAGLE KNIFE CO pocket knife that has advertising on it. But, it is my second, EAGLE KNIFE CO. pocket knife that is advertising this particular product. My other "WEAR RED GOOSE SHOES" pocket knife was posted, under this topic or thread, back on Wednesday, July 2, 2025. Overall, this is my thirty-eighth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-seven of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other knife or cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does have a WEAK half stop. The main blade does have an OK opening snap. The main blade does NOT have a closing snap. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[toomanyknives]

A couple of days ago, my trip to the post office produced this advertising pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, advertising, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE CO" The main handle side says, "WEAR RED GOOSE SHOES" The other handle side says nothing, it is blank. This is only my fourth EAGLE KNIFE CO pocket knife that has advertising on it. But, it is my second, EAGLE KNIFE CO. pocket knife that is advertising this particular product. My other "WEAR RED GOOSE SHOES" pocket knife was posted, under this topic or thread, back on Wednesday, July 2, 2025. Overall, this is my thirty-eighth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-seven of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other knife or cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does have a WEAK half stop. The main blade does have an OK opening snap. The main blade does NOT have a closing snap. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

Nice Skip! Great history. Now you need a Red Goose "Golden Egg" to go with it..

[doglegg]

Cool one Skip.

[New_Windsor_NY]

Nice.....

Thank you, Kerry.

Cool.....

Thank you, Floyd.

[New_Windsor_NY]

Very recently, my visit to the post office produced this pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE CO" This is my thirty-ninth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-eight of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other knife or cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does have a SOFT half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. This pocket knife is in VERY GOOD condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[New_Windsor_NY]

Recently, my trip to the post office produced this pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 3 3/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO (over) PAT PEND (over) MADE IN USA" This is my fortieth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-nine of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other knife or cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[toomanyknives]

Recently, my trip to the post office produced this pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 3 3/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO (over) PAT PEND (over) MADE IN USA" This is my fortieth, EAGLE KNIFE COMPANY pocket knife. ALL thirty-nine of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other knife or cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

That's a very interesting one, Skip!. I really like how the formed the handles. I'll bet that one feels good in the hand.

[New_Windsor_NY]

That's…..

Thank you, Kerry.
It’s just a little bit more comfortable in my hand than
the flat handled, EAGLE KNIFE COMPANY pocket knives.

[New_Windsor_NY]

Very recently, my visit to the post office produced this pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), one blade, one tang stamp, 2 7/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE (over) KNIFE CO” This my forty-first, EAGLE KNIFE COMPANY pocket knife. ALL forty of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other knife or cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does have a WEAK half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. This pocket knife is in VERY GOOD condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445

[New_Windsor_NY]

A couple of days ago, my trip to the post office produced this pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my collection. It is an EAGLE KNIFE COMPANY (1916-1919), two blades, two tang stamps, tang stamp, 3 3/8" closed, all metal, pocket knife. The main blade front tang stamp says, "EAGLE KNIFE CO (over) PAT. ALL’D (over) MADE IN USA” The secondary blade front tang stamp says, “EAGLE KNIFE CO (over) PAT. OCT. 1.18 (over) MADE IN USA” This is my eighth, EAGLE KNIFE COMPANY pocket knife, that has two blades. This is my forty-second, EAGLE KNIFE COMPANY pocket knife. ALL forty-one of my other, EAGLE KNIFE COMPANY pocket knives, have been previously posted, under and throughout, this topic or thread. This pocket knife is a "cousin" of the ALLEN CUTLERY COMPANY, the GEO. SCHRADE KNIFE CO., INC., the VALLEY FORGE CUTLERY COMPANY, the ETCHED P. COMPANY, and other knife or cutlery companies that manufactured pocket knives of a similar, simple construction. The main blade does have a GOOD half stop. The main blade does have a VERY GOOD opening snap. The main blade does have a NASTY closing snap. The secondary blade does have a CRISP half stop. The secondary blade does have a VERY GOOD opening snap. The secondary blade does have a NASTY closing snap. This pocket knife is in EXCELLENT condition. This pocket knife did NOT require cleaning. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
ANY previous post involving EAGLE KNIFE COMPANY or related pocket knives (CRUSADER & DIXON),
should NOT have "one spring" or "single spring" in the description of the pocket knife. The "spring"
on ALL of these pocket knives, is the "bend" which forms the bottom of each pocket knife.

***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
I looked at these pocket knives a little more closely. MY above quoted ***** NOTE ***** etc.,
is WRONG! In regards to ANY and ALL previous posts involving EAGLE KNIFE COMPANY or
related pocket knives (CRUSADER & DIXON), they ALL do have an actual spring or springs.
It extends from the pivot pin to the center pin. The spring on ALL of these pocket knives,
IS NOT, I repeat, IS NOT the bend which forms the bottom of each pocket knife.

Here Is The Link To The ALLEN CUTLERY COMPANY Topic Or Thread:
https://www.allaboutpocketknives.com/kn ... php?t=7445