Mail Call !-Post your new pick-ups here............

[toomanyknives]

Simplicity

IMG_1759 2.jpeg

Yep, it certainly is, rdnzl, and I like that, does it have just that one blade? Thx!
I have long admired Victorinox knives, but I like knives with only one spear-point blade, and possibly until right now depending on what you tell me, I haven't see any. Really like the grey color too.

That's a single blade Marco. I have one. Excellent knife. It's just called a Swiss Army Alox

[GSPTOPDOG]

That's a single blade Marco. I have one. Excellent knife. It's just called a Swiss Army AloxIMG_1990 (2).JPG

a Swiss Army Alox..... that falls under the "KISS" principal.... perfect for EDC....

[toomanyknives]

That's a single blade Marco. I have one. Excellent knife. It's just called a Swiss Army AloxIMG_1990 (2).JPG

a Swiss Army Alox..... that falls under the "KISS" principal.... perfect for EDC....

Knife Is So Swiss? Knife In Someones Sweater? Keep It Somewhere Safe? I give up, TOPDOG!

[treefarmer]

Here are a couple that recently arrived, different sellers:

The Barlow is a Kabar 1013, fairly sure it is in the 1955-'65 era. Clip has half stop , the pen is rather lazy.
The metal handle is a Schrade, marked SCHRADE over N.Y. U.S.A. marked 752 on pile side. This stamp begins in 1973-? The engraving on the pile side are the words New York Knife Works over Walden over New York, the pile side is the large factory of New York Knife shown in lots of the research about NYKC. The Schrade 752 shows up on the internet with different business names and such.
Treefarmer

[GSPTOPDOG]

a Swiss Army Alox..... that falls under the "KISS" principal.... perfect for EDC....

Knife Is So Swiss? Knife In Someones Sweater? Keep It Somewhere Safe? I give up, TOPDOG!

.......

[glennbad]

Here are a couple that recently arrived, different sellers:001.JPG002.JPG

The Barlow is a Kabar 1013, fairly sure it is in the 1955-'65 era. Clip has half stop , the pen is rather lazy.
The metal handle is a Schrade, marked SCHRADE over N.Y. U.S.A. marked 752 on pile side. This stamp begins in 1973-? The engraving on the pile side are the words New York Knife Works over Walden over New York, the pile side is the large factory of New York Knife shown in lots of the research about NYKC. The Schrade 752 shows up on the internet with different business names and such.
Treefarmer

That metal Schrade is a dandy!

[treefarmer]

That metal Schrade is a dandy!
[/quote]

Thanks, Glenn.
A knife like this opens up several of doors, a search for 752's with other commemorations, trade it to someone who is into New York Knife Works items or a Schrade collector/accumulator.
Treefarmer

[toomanyknives]

Here are a couple that recently arrived, different sellers:001.JPG002.JPG

The Barlow is a Kabar 1013, fairly sure it is in the 1955-'65 era. Clip has half stop , the pen is rather lazy.
The metal handle is a Schrade, marked SCHRADE over N.Y. U.S.A. marked 752 on pile side. This stamp begins in 1973-? The engraving on the pile side are the words New York Knife Works over Walden over New York, the pile side is the large factory of New York Knife shown in lots of the research about NYKC. The Schrade 752 shows up on the internet with different business names and such.
Treefarmer

Those are great Treefarmer. I've never seen a Schrade like that one. Nice one to have!

[dlr110]

I had this generic no name delivered today. When I saw it on Amazon it peaked my interest and the price was only $20.
The ad says the blade is 440C and the handle is Nylon Glass Fiber. Made in China of course. The blade springs open very
quickly and there is no wobble when open. Currently has a very nice edge on the blade. To close you press the lever on
the side and that releases the holding pin on the pivot end of the blade. Just another example of those odd knives in
my collection.
_

Screenshot 2024-07-03 164158.png (439.05 KiB) Viewed 1883 times

[rdnzl]

[Madmarco]

Simplicity

IMG_1759 2.jpeg

Yep, it certainly is, rdnzl, and I like that, does it have just that one blade? Thx!
I have long admired Victorinox knives, but I like knives with only one spear-point blade, and possibly until right now depending on what you tell me, I haven't see any. Really like the grey color too.

That's a single blade Marco. I have one. Excellent knife. It's just called a Swiss Army AloxIMG_1990 (2).JPG

Thanks, Kerry, your close-up picture makes me want one even more.
Tips on where to get one, perhaps? Thx!

[Madmarco]

That's a single blade Marco. I have one. Excellent knife. It's just called a Swiss Army AloxIMG_1990 (2).JPG

a Swiss Army Alox..... that falls under the "KISS" principal.... perfect for EDC....

And a hearty THANKS to you also, Dog!
KISS = Karry it softly sucka"!
Karry it smartly son!
Or, the most likely definition, "Iiiiiiii wanna rock an' roll all niiiight and party every day"!

[Madmarco]

I had this generic no name delivered today. When I saw it on Amazon it peaked my interest and the price was only $20.
The ad says the blade is 440C and the handle is Nylon Glass Fiber. Made in China of course. The blade springs open very
quickly and there is no wobble when open. Currently has a very nice edge on the blade. To close you press the lever on
the side and that releases the holding pin on the pivot end of the blade. Just another example of those odd knives in
my collection.
_
Screenshot 2024-07-03 164158.png

Those are great knives for the price, David, I've had mine for a couple years and even though I don't carry it, I "play" with it regularly and it's holding up just fine.
The Chinese sites put etched logos on theirs as being either a Colt brand or AKC, including the Bill DeShivs Leverletto on the blade. Feels great in my hand, fires smoothly, and makes a great comfort knife. Enjoy!

[dlr110]

I had this generic no name delivered today. When I saw it on Amazon it peaked my interest and the price was only $20.
The ad says the blade is 440C and the handle is Nylon Glass Fiber. Made in China of course. The blade springs open very
quickly and there is no wobble when open. Currently has a very nice edge on the blade. To close you press the lever on
the side and that releases the holding pin on the pivot end of the blade. Just another example of those odd knives in
my collection.
_
Screenshot 2024-07-03 164158.png

Those are great knives for the price, David, I've had mine for a couple years and even though I don't carry it, I "play" with it regularly and it's holding up just fine.
The Chinese sites put etched logos on theirs as being either a Colt brand or AKC, including the Bill DeShivs Leverletto on the blade. Feels great in my hand, fires smoothly, and makes a great comfort knife. Enjoy!

Thank you....

[toomanyknives]

Yep, it certainly is, rdnzl, and I like that, does it have just that one blade? Thx!
I have long admired Victorinox knives, but I like knives with only one spear-point blade, and possibly until right now depending on what you tell me, I haven't see any. Really like the grey color too.

That's a single blade Marco. I have one. Excellent knife. It's just called a Swiss Army AloxIMG_1990 (2).JPG

Thanks, Kerry, your close-up picture makes me want one even more.
Tips on where to get one, perhaps? Thx!

I got mine off of Amazon, Marco. It was six dollars more directly off of the Victorinox SA site. $28.00 USD, $22.00 off Amazon.

[Quick Steel]

After reading numerous comments about how good ROSECRAFT knives were, I decided to get one and see for myself. This one arrived yesterday from Tony at Corn Creek Cutlery. In a word, superb. The quality is impeccable. D2 steel, Micarta scales, half stop, imperceptible run-up: quite amazing quality for the price. While the shield is not to my taste, it is a very minor distraction.

[Corn Creek Cutlery]

Glad you like the Obed Trapper QS!! For the record .. I do not care for the shield either. Thank you again for supporting us!!

[GSPTOPDOG]

I had this generic no name delivered today...The ad says the blade is 440C and the handle is Nylon Glass Fiber. Made in China of course. . To close you press the lever on
the side and that releases the holding pin on the pivot end of the blade. Just another example of those odd knives in
my collection.

OK, maybe it's just me ..... but that knife seems a little overly complicated for my limited intellectual capabilities ... it appears to me that the basics of rocket science are little easier to comprehend....

[Madmarco]

That's a single blade Marco. I have one. Excellent knife. It's just called a Swiss Army AloxIMG_1990 (2).JPG

Thanks, Kerry, your close-up picture makes me want one even more.
Tips on where to get one, perhaps? Thx!

I got mine off of Amazon, Marco. It was six dollars more directly off of the Victorinox SA site. $28.00 USD, $22.00 off Amazon.

Thanks buddy, probably go Amazon since I have an account with them, plus, 6 bucs is 6 bucs!

[Madmarco]

After reading numerous comments about how good ROSECRAFT knives were, I decided to get one and see for myself. This one arrived yesterday from Tony at Corn Creek Cutlery. In a word, superb. The quality is impeccable. D2 steel, Micarta scales, half stop, imperceptible run-up: quite amazing quality for the price. While the shield is not to my taste, it is a very minor distraction.

P1050305.JPGP1050302.JPG

Terrific knife, huh, Garry! That one is next on my list to buy, and the shield doesn't really bother me, perhaps try thinking of it as a ghost instead of a skull. That reaction to sinister/morbid sure pops-up on you whenever it likes, huh? Lucky you, it sucks me in every time!

[Madmarco]

I had this generic no name delivered today...The ad says the blade is 440C and the handle is Nylon Glass Fiber. Made in China of course. . To close you press the lever on
the side and that releases the holding pin on the pivot end of the blade. Just another example of those odd knives in
my collection.

OK, maybe it's just me ..... but that knife seems a little overly complicated for my limited intellectual capabilities ... it appears to me that the basics of rocket science are little easier to comprehend....

Hmm, not really, Dog, it's your basic stiletto-style swivel bolster auto, just configured slightly differently, having the safety on the side is not the norm but not uncommon either, and the square plastic button is not unusual, so yes, I'm afraid it is just you and your limited intellectual capabilities, so smarten up, eh! lol!
Cool rocket pic, though!

[GSPTOPDOG]

so yes, I'm afraid it is just you and your limited intellectual capabilities, so smarten up, eh! lol!
Cool rocket pic, though!

..... ..... the knife seemed a lot more complicated when I first looked at it .......

[Madmarco]

It's all good, Dog, I sure hope you realize I was just teasing you, big time, cuz your reply sounds like you think Dad is gonna take you out to the ole' woodshed with Hickory stick in-hand.
I've seen knives that didn't look "right" to me, but after an explanation they became clear, so nobody's gonna give you a whoopin', at least not over this, other "stuff" maybe, but not this!

[dlr110]

the knife seemed a lot more complicated when I first looked at it .......

It's not complicated, it's my description and added captions that made it sound/look complicated. With my government and my computer support background I have a tendency to do that when I write. Sorry

[GSPTOPDOG]

It's all good, Dog, I sure hope you realize I was just teasing you, big time, cuz your reply sounds like you think Dad is gonna take you out to the ole' woodshed with Hickory stick in-hand.
I've seen knives that didn't look "right" to me, but after an explanation they became clear, so nobody's gonna give you a whoopin', at least not over this, other "stuff" maybe, but not this!

.... I'm just not sure why a knife needs an oxygen boost pump button ..... wait... maybe that was the rocket.... ..... now I'm even more confused