Buck 1960s era

Hoyt Buck produced the first Buck Knife in 1902. Hoyt and his son Al moved to San Diego and set up shop as H.H. Buck & Son in 1947. Al Buck revolutionized the knife industry in 1964 with the infamous Model 110 Folding Hunter. The company's innovative history and attention to quality have made for many great collectible knives.
Post Reply
PT-Treasures
Posts: 9
Joined: Sat Sep 21, 2024 4:59 am

Buck 1960s era

Post by PT-Treasures »

I believe this is in the era of 1961 or so. I really can't find one like it. Any help appreciated.
Attachments
1000012321.jpg
1000012322.jpg
1000012335.jpg
bertl
Posts: 200
Joined: Thu Feb 17, 2011 3:22 pm
Location: Wyoming

Re: Buck 1960s era

Post by bertl »

Without detailed photos, my guess is that the knife is from about 1963. I don't think the sheath came with that knife—the sheath is earlier and from the late 50s.
PT-Treasures
Posts: 9
Joined: Sat Sep 21, 2024 4:59 am

Re: Buck 1960s era

Post by PT-Treasures »

Does this help? Any idea on value! Thanks so much for the help!
Attachments
1000012487.jpg
1000012488.jpg
1000012489.jpg
1000012491.jpg
1000012490.jpg
bertl
Posts: 200
Joined: Thu Feb 17, 2011 3:22 pm
Location: Wyoming

Re: Buck 1960s era

Post by bertl »

PT-Treasures wrote: Sat Nov 30, 2024 12:19 am Does this help? Any idea on value! Thanks so much for the help!
I think I'll stay with my 1963 date. I'm always hesitant to give values. Check the sold/completed listings on eBay—not the asking prices. The blade on your knife is in pretty rough condition, but it could be cleaned up some. I think the sheath, which looks pretty good, probably has more collector value than the knife.
User avatar
OLDE CUTLER
Gold Tier
Gold Tier
Posts: 4643
Joined: Wed Oct 11, 2017 8:11 pm
Location: South Dakota

Re: Buck 1960s era

Post by OLDE CUTLER »

Yes, I would agree that the value of the knife is not that much. It has been rode hard and put away wet. Sharpening abuse and the dings on the handle show it has had a hard life.
"Sometimes even the blind chicken finds corn"
Rockingkj
Gold Tier
Gold Tier
Posts: 477
Joined: Mon Dec 25, 2023 11:24 am

Re: Buck 1960s era

Post by Rockingkj »

Thinking the age about right. Early factory knife with that black handle. Like anything else if a fellow needed an example to fill a slot in collection would forgive a bit of condition issues. Once line Buck knives are not all that plentiful. Took me quite a few years to fill my Buck case with one liners.
IMG_6594.jpeg
You can always get more money, good old knives are hard to find.

Nature abhors a vacuum, me I hate a dull knife.
User avatar
XX Case XX
Posts: 3616
Joined: Sat Oct 31, 2015 7:24 pm
Location: California

Re: Buck 1960s era

Post by XX Case XX »

Rockingkj wrote: Sat Nov 30, 2024 10:46 pm Took me quite a few years to fill my Buck case with one liners.
Man that case is very nice. I imagine you searched far and wide for those knives. Nicely done. ::tu::

__________
Mike
"If there are no Dogs in Heaven, then when I die, I want to go where they went". Will Rogers

I work hard so my Dog can have a better life...
Rockingkj
Gold Tier
Gold Tier
Posts: 477
Joined: Mon Dec 25, 2023 11:24 am

Re: Buck 1960s era

Post by Rockingkj »

Thanks. The slot the caper is in should be the fisherman knife (121) with a scaler. Been too frugal to buy one.
You can always get more money, good old knives are hard to find.

Nature abhors a vacuum, me I hate a dull knife.
Modern Slip Joints
Posts: 772
Joined: Sat Jul 14, 2018 4:15 am

Re: Buck 1960s era

Post by Modern Slip Joints »

I wondered why there was no 121. Although I did not buy a 121 until the early 1980s 121s became my favorite 100 series Buck. I did not know they were made with a fish scaler. What years were 121s made with a scaler?
Rockingkj
Gold Tier
Gold Tier
Posts: 477
Joined: Mon Dec 25, 2023 11:24 am

Re: Buck 1960s era

Post by Rockingkj »

I found this bit of information and thinks it’s pretty accurate.

“The 121 was introduced in 1964 and the first models had the blade stamp up on the spine of the blade (in 1965-1966 they changed and marked Buck on the ricasso)

Thin semi flexible blade with fish scaler (this was a weak point on the knife and they discontinued the fish scaler I believe in 1968)”
You can always get more money, good old knives are hard to find.

Nature abhors a vacuum, me I hate a dull knife.
Post Reply

Return to “Buck Knife Collector's Forum”