China "Miscellaneous" Pocket Knives.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one partially serrated blade, one tang stamp, one blade etch, 5" closed, lockback, pocket knife. The main blade front tang stamp says, "440 S.STEEL" The main blade back etch says, "CHINA" The blade does have a SOFT half stop. The blade has a GOOD opening snap. The blade has a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one serrated blade, one tang stamp, 5" closed, thumb stud, lanyard hole, lockback, pocket knife. The main blade back tang stamp says, "STAINLESS (over) CHINA" The shield says (written), "Alexander" The blade does have a SOFT half stop. The blade has a GOOD opening snap. The blade has a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, two blade etches, 3 3/8" closed, lockback, pocket knife. The main blade front tang etch says, "TOMAHAWK" with a tomahawk as the letter "T" The main blade back tang etch says, "STAINLESS (over) CHINA" The main handle side has images of two deer. The other handle side also has images of two deer. The blade does have a SOFT half stop. The blade has an OK opening snap. The blade has a GOOD closing snap. Overall, this pocket knife is in VERY GOOD condition. It did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, one tang stamp, 3 3/8" closed, lockback, pocket knife. The main blade front tang stamp says, "STAINLESS (over) CHINA" The main handle side has images of two wolves. The other handle side also has images of two wolves. The blade does have a SOFT half stop. The blade has a GOOD opening snap. The blade has a GOOD closing snap. Overall, this pocket knife is in VERY GOOD condition. It did NOT need any cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, two tang stamps, 3 5/8" closed, one spring, pocket knife. The main blade front tang stamp says, "STAINLESS (over) CHINA" The main blade back tang stamp says, "37913" The main handle side has an embossed, what appears to be a buffalo's head. It also has designs and a plastic insert. The other handle side has an embossed, Native American's head. It also has designs and a plastic insert. The blade does have a GOOD half stop. The blade has a GOOD opening snap. The blade has a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this advertising pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT purchase the group or lot of pocket knives to obtain this particular advertising pocket knife. However, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, two blades, one tang stamp, 3 3/8" closed, two springs, half lockback, half slip joint, advertising, pocket knife. The main blade front tang stamp says, "STAINLESS (over) CHINA" The main handle side bolster says, "SKOAL" (embossed) The main blade is a lockback. The secondary blade is a slip joint. The main blade does have a SOFT half stop. The main blade has a GOOD opening snap. The main blade has a GOOD closing snap. The secondary blade does have a SOFT half stop. The secondary blade has a GOOD opening snap. The secondary blade has a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this advertising pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT purchase the group or lot of pocket knives to obtain this particular advertising pocket knife. However, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, one tang etch, 3 1/16" closed, one spring, lockback, advertising, pocket knife. The main blade front tang etch says, "STAINLESS (over) CHINA" The main handle side says, "Farm Credit" with a symbol or logo. The blade does have a SOFT half stop. The blade has a GOOD opening snap. The blade has an OK closing snap. Overall, this pocket knife is in VERY GOOD condition. It did require a little bit of cleaning.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, one tang stamp, 4 1/16" closed, one spring, lockback, pocket knife. The main blade front tang stamp says, "STAINLESS (over) CHINA" This pocket knife does have a couple of VERY minor cosmetic issues. The main blade does have a SOFT half stop. The main blade has a GOOD opening snap. The main blade has a GOOD closing snap. Overall, this pocket knife is in VERY GOOD condition. It needed a little cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, two tang stamps, 4 1/8" closed, one spring, lockback, pocket knife. The main blade front tang stamp says, "440 steel" The main blade back tang stamp says, "China" The main handle side has images of deer (VERY worn) and an embossed dream catcher(?) The other handle side also has images of deer (VERY worn). The blade does have a SOFT half stop. The blade does have a GOOD opening snap. The blade does have a GOOD closing snap. Overall, this pocket knife is in FAIR condition. It needed VERY little cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, two blade etches, 4 1/8" closed, one spring, lockback, pocket knife. The main blade front etch says, "CHINA" The main blade back etch says, "STAINLESS (over) STEEL" The main handle side has images of wolves and an embossed wolf's head. The other handle side also has images of wolves and an embossed wolf's head. The blade does have a SOFT half stop. The blade has NO opening snap. The blade has NO closing snap. This pocket knife does have an issue with the spring. Overall, this pocket knife is still in FAIR condition. A little cleaning was necessary.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, one tang stamp, 2" closed, one spring, pocket knife. The main blade front tang stamp says, "STAINLESS (over) CHINA" The blade does have a SOFT half stop. The blade does have a GOOD opening snap. The blade does have a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, two tang stamps, 2 1/8" closed, one spring, pocket knife. The main blade front tang stamp says, "STAINLESS (over) STEEL" The main blade back tang stamp says, "CHINA" The blade does have a GOOD half stop. The blade does have a GOOD opening snap. The blade does have a VERY GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. NO cleaning was necessary. I wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this advertising pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, one tang stamp, 3 3/8" closed, one spring, lockback, advertising, pocket knife. The main blade front tang stamp says, "STAINLESS (over) CHINA" The main handle side says, "Brumbach's Paint - & Home Center - (717) 484-4148" The other handle side says, "LDB Construction - (717) 484-4148" The blade does have a SOFT half stop. The blade does have a GOOD opening snap. The blade does have a GOOD closing snap. This pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, two blades, two tang stamps, 2 3/4" closed, two springs, pocket knife. The main blade front tang stamp says, "STAINLESS (over) STEEL" The main blade back tang stamp says, "CHINA" The main blade does have a SOFT half stop. The main blade does have an OK opening snap. The main blade does have a GOOD closing snap. The secondary blade does have a SOFT half stop. The secondary blade does have an OK opening snap. The secondary blade does have a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born", pocket knife accumulation. It is a CHINA, one blade, one tang stamp, 3 5/8" closed, a thumb stud, a belt or pocket clip, pocket knife. The main blade front tang stamp says, "STAINLESS (over) CHINA" The main handle side has the image of a tractor. The other handle side also has the image of a tractor. It is under the removable belt or pocket clip. If the tractor is indeed a JOHN DEERE tractor, neither image says it, or I just can not see it. The blade does have a SOFT half stop. The blade does have an OK opening snap. The blade does NOT have any closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born", pocket knife accumulation. It is a CHINA, one partially serrated blade, one blade stamp, one blade etch, 4 1/2" closed, a thumb stud, a belt or pocket clip, a lanyard hole, liner lock, pocket knife. The main blade front stamp says, "440 S.STEEL" The main blade back etch says, "CHINA" The main handle side has a scale with the image of two deer or two elk, battling it out. The blade does NOT have a half stop. The blade does have an OK opening snap. The blade does NOT have any closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one partially serrated blade, one tang etch, 3" closed, a lanyard hole, lockback, pocket knife. The main blade back tang etch says, "STAINLESS (over) CHINA" The blade (SHARP!!) does have a WEAK half stop. The blade does NOT have an opening snap. The blade does have an OK closing snap. Overall, this pocket knife is in VERY GOOD condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one partially serrated blade, one tang etch, 3" closed, a lanyard hole, lockback, pocket knife. The main blade back tang etch says, "STAINLESS (over) CHINA" The blade (SHARP!!) does have a WEAK half stop. The blade does NOT have an opening snap. The blade does NOT have a closing snap. Overall, this pocket knife is in VERY GOOD condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my "foreign born", pocket knife accumulation. I am posting this FOR REFERENCE. It is a CHINA "Bar Creek", one blade, two tang stamps, 2 3/4" closed, a lanyard hole, lockback, pocket knife. The main blade front tang stamp says, "Bar (over) Creek" The main blade back tang stamp says, "440 STAINLESS (over) CHINA" This pocket knife is missing both of its scales. Both of the bolsters have cosmetic issues. The blade does have a SOFT half stop. The blade does have a GOOD opening snap. The blade does have a GOOD closing snap. Even with its cosmetic flaws, this pocket knife is still in FAIR+ condition. It did need a little bit of cleaning.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one blade, one tang stamp, 3" closed (not including the bail), pocket knife. The main blade front tang stamp says, "CHINA" (over) a horse's(?) head. The main handle side has graphics and images of two animals. The other handle side also has graphics and images of two animals. The blade does NOT have a half stop. The blade does NOT have an opening snap. The blade does NOT have a closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born" pocket knife accumulation. Although there is NO country of origin stamped or marked anywhere on this pocket knife, I am 99.999% sure that it was made in CHINA. It is an UNBRANDED, one blade, one tang stamp, 2 1/2" closed, lockback, pocket knife. The main blade front tang stamp says, "STAINLESS" The blade does have a SOFT half stop. The blade does have a GOOD opening snap. The blade does have a GOOD closing snap. This pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, two blades, two tang stamps, 2 13/16" closed, two springs, pocket knife. The main blade front tang stamp says, "STAINLESS" The main blade back tang stamp says, "CHINA" The main blade does have a SOFT half stop. The main blade does have an OK opening snap. The main blade does have a GOOD closing snap. The secondary blade does have a SOFT half stop. The secondary blade does NOT have an opening snap. The secondary blade does have a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #4.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. It now becomes my most recent example to be posted under this topic or thread. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born", pocket knife accumulation. There is absolutely NO country of origin, or ANY other stamp(s) or marking(s), anywhere on this pocket knife. But, I am 99.999% positive that this pocket knife was made in either CHINA or PAKISTAN. However, just to be on the safe side, I also posted this pocket knife in the "Other foreign made knives" forum, under the "Knives Made In Pakistan" topic. It is an UNBRANDED, one blade, 3" closed, a lanyard hole, lockback, pocket knife. The blade does NOT have a half stop. The blade does have a GOOD opening snap. The blade does have a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #5 To #9.
Not too recently, this pocket knife arrived in a group of Trump items that I purchased. I did NOT purchase the group of Trump items to obtain this particular pocket knife. But, it did get added to my general, "foreign born", pocket knife accumulation. It is a CHINA, one blade, one blade etch, 4 5/8" closed, a thumb stud, a belt or pocket clip, a lanyard hole, liner lock, pocket knife. The main blade back etch says, "440 Stainless (over) CHINA" The main handle side has American flag graphics and says, "KEEP AMERICA GREAT" The blade does have a SOFT half stop. The blade does have a GOOD opening snap. The blade does have a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #4.
Not too recently, this automobile, figural pocket knife, arrived in a group or lot of pocket knives that I purchased. It now becomes my most recent example to be posted under this topic or thread. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born", pocket knife accumulation. There is absolutely NO country of origin, or ANY other stamp(s) or marking(s), anywhere on this pocket knife. However, I am 99.999% sure that this pocket knife was made in CHINA. It is an UNBRANDED, one blade, 1 13/16" closed, a lanyard or key ring loop, automobile, figural pocket knife. The blade does have a SOFT half stop. The blade does have an OK opening snap. The blade does have a GOOD closing snap. Overall, this pocket knife is in VERY GOOD condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #5 To #8.
Not too recently, this cross, figural pocket knife, arrived in a group or lot of pocket knives that I bought. It now becomes my most recent example to be posted under this topic or thread. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born", pocket knife accumulation. There is absolutely NO country of origin, or ANY other stamp(s) or marking(s), anywhere on this pocket knife. But, I am 99.999% positive that this pocket knife was made in CHINA. It is an UNBRANDED, one blade, 1 3/4" closed (not including the loop or ring), cross, figural pocket knife. The blade does have a SOFT half stop. The blade does NOT have an opening snap. The blade does NOT have a closing snap. Overall, this pocket knife is in VERY GOOD condition. It did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Very recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. It now becomes my most recent example to be posted under this topic or thread. I definitely did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born" pocket knife accumulation. It is a CHINA, one partially serrated blade, one tang stamp, 2 1/2" closed, a lanyard hole, lockback, pocket knife. The main blade front tang stamp says, "STAINLESS (over) CHINA" The main handle side has the image of a bird on it. The blade does have a SOFT half stop. The blade does have a GOOD opening snap. The blade does have a GOOD closing snap. This pocket knife is in VERY GOOD condition. This pocket knife did NOT need any cleaning. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Very recently, this pocket knife arrived in a group or lot of pocket knives that I bought. It now becomes my most recent example to be posted under this topic or thread. I definitely did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born", pocket knife accumulation. It is a CHINA, one blade, one tang stamp, 3" closed, a lanyard hole, lockback, pocket knife. The main blade back tang stamp says, "STAINLESS (over) CHINA. The blade does NOT have a half stop. The blade does have an OK opening snap. The blade does have a GOOD closing snap. This pocket knife is in EXCELLENT condition. This pocket knife did NOT require any cleaning.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. It now becomes my most recent example to be posted under this topic or thread. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born" pocket knife accumulation. It is a Rough Ryder, one blade, one blade front tang etch, one blade back etch, 2 1/2" closed (not including the loop or ring), crucifix, pendant or necklace, pattern or style of pocket knife. The blade front tang etch says, "Rough Ryder" (written). The blade back etch says, "CHINA" (VERY faint). The blade does have a CRISP half stop. The blade does have a VERY GOOD opening snap. The blade does have a VERY GOOD closing snap. This pocket knife is in EXCELLENT condition. This pocket knife did NOT need any cleaning. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Very recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. It now becomes my latest example to be posted under this topic or thread. I definitely did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born", pocket knife accumulation. It is a CHINA, one blade, one blade back tang etch, 3 1/4" closed, cartridge, pattern or style of pocket knife. The blade back tang etch says, "CHINA" The stamp on the bottom of the casing says, "30-06 SPRG" The blade does have a GOOD half stop. The blade does have a GOOD opening snap. The blade does have a GOOD closing snap. This pocket knife is in EXCELLENT condition. This pocket knife did NOT require any cleaning. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

Description Pocket Knife #1. Pictures #1 To #5.
Not too recently, I bought this pocket knife because I thought it was a CAMILLUS 72 variation, lookalike, or wannabe. It did come close, but as it turned out, it wasn't. It now becomes my latest example to be posted under this topic or thread. Still, it did get added to my general, "foreign born" pocket knife accumulation. It is a Rite EDGE, three blades, two tang etches, one blade etch, 3 9/16" closed, a long main blade pull, two springs, stockman, pattern or style of pocket knife. The main blade front etch says, "Built Tough" (double underlined) with a pair of crossed hammers in the center. The main blade front tang etch says, "Rite (over) EDGE" The main blade back tang etch says, "STAINLESS (over) CHINA" The main blade does have a SOFT half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. The secondary blade does NOT have a half stop. The secondary blade does have a VERY GOOD opening snap. The secondary blade does have a VERY GOOD closing snap. The third blade does have a SOFT half stop. The third blade does have an OK opening snap. The third blade does have a VERY GOOD closing snap. This pocket knife did come with the original box (not pictured). This pocket knife is in EXCELLENT condition. This pocket knife did NOT require any cleaning.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

Description Pocket Knife #2. Pictures #6 To #10.
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. It now becomes my most recent example to be posted under this topic or thread. I definitely did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born", pocket knife accumulation. It is a CHINA, two blades, one tang stamp, 3 1/2" closed, tipped bolsters, two springs, pocket knife. The main blade front tang stamp says, "STAINLESS (over) CHINA" with a "K" in a circle, on the right side. I seriously doubt very much whether the "K" in the circle has anything at all to do with this pocket knife being kosher or with any jew dietary laws. But, who knows..... The main blade does have a WEAK half stop. The main blade does have an OK opening snap. The main blade does have a GOOD closing snap. The secondary blade does have a WEAK half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a GOOD closing snap. Overall, this pocket knife is in EXCELLENT condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

[New_Windsor_NY]

To begin with, PLEASE read the following quote. It goes along with picture #9, the left side, posted below.

This one was advertised as "Vtg Eagle Top - Single Blade Knife - Scout Knife" and included lots of good clear pictures. The stamp did look like Eagle Top but I thought, maybe Eagleton, though it is way too modern compared to the other Eagletons we have seen here. The shell handle looked like an Imperial or Richards. Once I had the knife in hand, things didn't get any clearer. At first I thought it might be Eggleston, but in the end I hit on Eaglestar as my best guess. If anybody has any ideas I'd like to hear them.

I believe that my following post might possibly answer the almost 13 year old post by "trail."
Not too recently, this pocket knife arrived in a group or lot of pocket knives that I bought. It now becomes my latest example to be posted under this topic or thread. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. However, it did get added to my general, "foreign born", pocket knife accumulation. It is an Eaglestar, one blade, one tang stamp, 3 1/4" closed (not including the bail), pocket knife. The main blade front tang stamp says, "Eaglestar" There is NO country of origin stamped, marked, or etched, anywhere on this pocket knife. The main blade does have an OK half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT need any cleaning. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

I have always assumed that my Eaglestar pocket knife was made in China. But, I had no proof. Now, I believe that I do have the proof. The VERY LAST picture posted below, shows the exact same (except for the color), pattern or style of pocket knife. The main blade front tang stamp says, "Daisy (over) CHINA" Could the pattern or style of THIS pocket knife just be a coincidence? I'm guessing that it's possible. However, I do believe that my Eaglestar pocket knife and the other two Eaglestar pocket knives in this post, are from China.

[New_Windsor_NY]

Recently, this pocket knife arrived in a group or lot of pocket knives that I purchased. It now becomes my most recent example to be posted under this topic or thread. I definitely did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it did get added to my general, "foreign born", pocket knife accumulation. It is an UNBRANDED, one blade, two tang stamps, 2 1/8" closed (not including the loop or ring), lockback, pocket knife. The main blade front tang stamp says, "STAINLESS" The main blade back tang stamp says, "ROSTFREI" (Rust-Free) There is NO country of origin stamped, marked, or etched, anywhere on this pocket knife. I am 99.999% positive that this pocket knife was made in CHINA. "ROSTFREI" DOES APPEAR ON POCKET KNIVES THAT ARE FROM CHINA. The main blade does have a SOFT half stop. The main blade does have an OK opening snap. The main blade does have a GOOD closing snap. This pocket knife is in GOOD condition. This pocket knife did NOT need cleaning. I just wiped it off, took some pictures, and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.