Help with Remington ID

[Jeffinn]

I’m looking at a knife on the bay as my next project knife. This one doesn’t have a model number so Im hoping someone in this group can help me ID it;

02FB4B3A-4F48-49FE-BDEB-1575CC0AC7DB.jpeg (20.52 KiB) Viewed 2224 times

Thanks!
Jeff

[Gunsil]

I can't quite make out the tang mark. If it is Remington in a straight line rather than a small circle it is one of the lower end knives they had made on contract for them. I don't think there is proof of who made them but there is a consensus among some collectors that they were made by Utica. The "straight line" Remingtons do not have model numbers on the tangs.

[Jeffinn]

Thanks Gunsil,
It’s a script straight line Remington. Looked like it could use a little TLC so I went ahead and bought it.
According to Goins the script Remington tang marking was from about 1935-40.
I don’t know much about Remington knives but it was fairly inexpensive as project knives go.
Thanks for the response and for the info!
Jeff

[espn77]

Most straight line stamps you see, excluding the scharade switch blades, are lesser quality. Rough black handles or pyremite. Dont see pattern stamps or etches on the blades as they were inked on and have been rubbed off. Here is one that still has the ink pattern number and ink etch on the blade.

[Jeffinn]

Most straight line stamps you see, excluding the scharade switch blades, are lesser quality. Rough black handles or pyremite. Dont see pattern stamps or etches on the blades as they were inked on and have been rubbed off. Here is one that still has the ink pattern number and ink etch on the blade.

Good to know, thanks!
Jeff

[Jeffinn]

And thanks for posting the picture, I was wondering what the broken blade looked like.