America's "Little Sheffield"

wlf · Post by **wlf** » Wed Dec 26, 2018 6:56 pm

Great knife Mike, Charlie's like that.

ObsidianEdge · Post by **ObsidianEdge** » Wed Dec 26, 2018 8:30 pm

He sure is. A long time ago Charlie sold me a Remington bullet that I then sold back to him. This past summer I bought the bullet and this NYK Co. back from him. I always regretted selling both, so it was nice of him to do.

luckydog64 · Post by **luckydog64** » Thu Dec 27, 2018 5:58 pm

That is a top shelf knife ObsidianEdge. It doesn't get any better than that knife. Here is a pretty clean NYK. Kind of small at 3 1/4.

LongBlade · Post by **LongBlade** » Thu Dec 27, 2018 11:13 pm

Some great looking knives being posted scoutknives, Barry, Mike and LD

... All beautiful old classics with lots of cool aspects from end to end

...

wlf · Post by **wlf** » Fri Dec 28, 2018 10:29 am

Barry, can you elaborate any on the bone on that Wester Bros?

ObsidianEdge · Post by **ObsidianEdge** » Fri Dec 28, 2018 5:27 pm

Thanks Lee and LD. LD, that's a sweet pattern and knife you posted. It looks nice and rounded.

1fartsmella · Post by **1fartsmella** » Fri Dec 28, 2018 6:39 pm

wlf wrote:Barry, can you elaborate any on the bone on that Wester Bros?

Lyle, After comparing the Wester Bros with the 1908 NYK catalog cut, the jigging looks more like the Rough Cut jigging of the earlier NYK bone.
Now a closer look, the size of the Easy Open ease more closely matches NYK rather than Schrade.
It's difficult to tell the maker by the bone alone. Many of the Walden company's used the "Bone Shop" bone for handles back during this time period.
We learned the Bone Shop history from or buddy Eric over at BF a few years back.

RalphAlsip · Post by **RalphAlsip** » Sat Dec 29, 2018 1:53 am

It is a pleasure to review this thread and see the fantastic old knives being posted. Below is a 4 1/4" NYK large cigar easy opener. The blades are on separate ends riding on single back spring. What's unusual (to me) is, in addition to the easy open cut-outs in the handles and liners, the secondary blade has a cut-out for the main blade easy open grab point. If you look close you can make out a very faint blade etch.

LongBlade · Post by **LongBlade** » Sat Dec 29, 2018 2:47 am

What a great knife Jerry

... that cut out on the blade is unique to my eye as well

... museum quality knife - like all I have seen from your collection

... thanks for sharing!!!

FRJ · Post by **FRJ** » Sat Dec 29, 2018 3:43 am

Jerry, that knife is pretty neat.
I have never seen that grind on the back of a blade before.

Lots of beautiful knives here.

wlf · Post by **wlf** » Sun Dec 30, 2018 4:46 am

Thanks Barry, No matter that is an excellent knife. I couldn’t remember where I read about the bone company before.

Jerry, I still have an affinity for the moose pattern, really any large single spring double ended jack. That NYK is tremendous, the etch is seen easily.

ObsidianEdge · Post by **ObsidianEdge** » Sun Dec 30, 2018 3:23 pm

That's an impressive knife on a lot of levels Jerry, and the notch makes it even more interesting. Quite the find.

RalphAlsip · Post by **RalphAlsip** » Sun Dec 30, 2018 8:48 pm

Thank you everyone for the gracious comments on the NYK large cigar moose.

Are Little Valley, NY and Gowanda, NY are considered to represent "Little Sheffield"?

KAW · Post by **KAW** » Tue Jan 01, 2019 7:31 pm

Some great first class knives being posted here...

Jerry... the NYKC with the easy open notch in the blade is the first I've seen like that... really neat!

The "Little Sheffield" area is traditionally described as in the Mid−Hudson River Valley region... about a 25 mile radius centered about Walden, NY. (NYKC, Walden KC, Schrade Cut Co)... so that includes Ellenville (Ulster, Schrade & Canal St. Cut), Napanoch & Honk Falls... plus smaller cutlers in Middletown, Newburgh, Poughkeepsie, etc...

Great start to the New Year

...as I received this Napanoch Lobster yesterday (I really like this pattern)

...

Also last week, I received this early (1946−60) Schrade Walden №896K with celluloid "Butter & Molasses" handles which appears to be unused...

Happy New Year to all!

ObsidianEdge · Post by **ObsidianEdge** » Tue Jan 01, 2019 8:51 pm

Nice Ken. I like the Schrade pattern and that's a really neat Napanoch lobster.

wlf · Post by **wlf** » Tue Jan 01, 2019 9:00 pm

I’m nearly obsessed with knife handles and those early pick bones are about my favorites Ken and the butter and molasses aint bad.

FRJ · Post by **FRJ** » Wed Jan 02, 2019 12:21 am

Very nice knives, Ken. Good show.

woodwalker · Post by **woodwalker** » Wed Jan 02, 2019 3:10 am

KAW wrote:Some great first class knives being posted here...
Jerry... the NYKC with the easy open notch in the blade is the first I've seen like that... really neat!
The "Little Sheffield" area is traditionally described as in the Mid−Hudson River Valley region... about a 25 mile radius centered about Walden, NY. (NYKC, Walden KC, Schrade Cut Co)... so that includes Ellenville (Ulster, Schrade & Canal St. Cut), Napanoch & Honk Falls... plus smaller cutlers in Middletown, Newburgh, Poughkeepsie, etc...

Great start to the New Year ...as I received this Napanoch Lobster yesterday (I really like this pattern) ...

Also last week, I received this early (1946−60) Schrade Walden №896K with celluloid "Butter & Molasses" handles which appears to be unused...

Happy New Year to all!

Beautiful knives and that Lobster is gorgeous!!

RalphAlsip · Post by **RalphAlsip** » Wed Jan 02, 2019 5:58 am

Ken, beautiful knives.

The Napanoch looks like it would require significant expertise to make.

Thanks for the clarification regarding Little Sheffield - it will help me stay on topic

FRJ · Post by **FRJ** » Thu Jan 10, 2019 2:05 am

Here's my first stamped Napanoch knife. I think I like it.

JAMESC41001 · Post by **JAMESC41001** » Thu Jan 10, 2019 2:20 am

Very impressive Joe.

peanut740 · Post by **peanut740** » Thu Jan 10, 2019 3:22 am

Joe,I would too!

FRJ · Post by **FRJ** » Thu Jan 10, 2019 4:54 am

Thank you James and Roger.

KAW · Post by **KAW** » Thu Jan 10, 2019 9:23 am

Congratulations Joe!!!

If this is the same knife that was recently auctioned on Ebay, then your photos are far better than what the seller had posted! He did describe the handles as pearl, but they looked like ivory in his shots...

...and as I have already mentioned on the previous page [edited]... I really do like the lobster pattern to the point that I've been tempted to consider carrying it, but it is just too historic a piece for me to do so...

FRJ · Post by **FRJ** » Thu Jan 10, 2019 3:15 pm

Thank you, Ken.

Since you like the Lobster pattern have you looked at any Orange Blossoms?
They are a $tep up but very nice knives. And great history too.

All About Pocket Knives

America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"

Re: America's "Little Sheffield"