Page 19 of 20

Re: Ring opener knives

Posted: Wed Sep 16, 2020 4:09 am
by bronze4u
::tu:: ::tu::
doglegg wrote: Tue Sep 15, 2020 11:04 pm Very interesting. ::tu:: ::tu::

Re: Ring opener knives

Posted: Wed Sep 16, 2020 4:12 am
by bronze4u
881FB203-DB9C-4A7F-96C6-FCC6073F1C34.jpeg
07C1C575-E40B-4CB4-804D-3AF02BFAD85B.jpeg
79FB8800-062B-4283-BAFC-54286E7A17C7.jpeg
30A17BCD-DCD7-4262-8E28-C61C1AA77E2E.jpeg
This one just arrived from Australia!
Late pics, and dark ones... I will try and post better tomorrow.
This one is an unusual shape for sure ( by ring turn standards)
Super unique one!
74BA64EB-4D22-4440-9757-B80ED7F3D55E.jpeg
8DCE8C4A-997F-47AF-8D8C-7695A68106C2.jpeg

Re: Ring opener knives

Posted: Wed Sep 16, 2020 5:29 am
by doglegg
It looks like a swell center

Re: Ring opener knives

Posted: Wed Sep 16, 2020 3:22 pm
by bronze4u
Is that what this shape is known as? It’s just an arched top, with a slight coffin edge bottom. I’ve never seen a ring turn in this style. The rings are a light material almost like silver. I do have another with rings made of this material. It doesn’t ‘clang’ like metal...

doglegg wrote: Wed Sep 16, 2020 5:29 am It looks like a swell center

Re: Ring opener knives

Posted: Wed Sep 16, 2020 4:30 pm
by doglegg
Not sure if it is a true swell center but it does have the look. A shape common to some whittlers. A very cool knife. ::nod:: ::nod::

Re: Ring opener knives

Posted: Wed Sep 16, 2020 4:41 pm
by bronze4u
Super interesting, and cool! Thank you - for that information...
doglegg wrote: Wed Sep 16, 2020 4:30 pm Not sure if it is a true swell center but it does have the look. A shape common to some whittlers. A very cool knife. ::nod:: ::nod::

Re: Ring opener knives

Posted: Mon Jan 11, 2021 8:10 pm
by bronze4u
Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...

Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...
ring turn Birks 1.jpg
ring turn Birks.jpg

Re: Ring opener knives

Posted: Mon Jan 11, 2021 8:36 pm
by Madmarco
bronze4u wrote: Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...

Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...

ring turn Birks 1.jpgring turn Birks.jpg
Hi B4U! I'm not at all familiar with ring-turn knives, ::shrug:: so I'm hoping you would explain their operation to me. When you turn the ring does the blade fly open by a spring, or does the blade gradually open as you turn the ring, or...? Thanks, Mark! 8)

Re: Ring opener knives

Posted: Mon Jan 11, 2021 8:42 pm
by knife7knut
bronze4u wrote: Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...

Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...

ring turn Birks 1.jpgring turn Birks.jpg
Nice one! Glad to see you back posting.I would keep an eye on that one as it looks like there is evidence of celluloid out-gassing on the blade.

Re: Ring opener knives

Posted: Mon Jan 11, 2021 10:11 pm
by bronze4u
Thank you!

Not sure what that means exactly, (My wife has accused me of this though!)
However, celluloid has definitely shrunk.






knife7knut wrote: Mon Jan 11, 2021 8:42 pm
bronze4u wrote: Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...

Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...

ring turn Birks 1.jpgring turn Birks.jpg
Nice one! Glad to see you back posting.I would keep an eye on that one as it looks like there is evidence of celluloid out-gassing on the blade.

Re: Ring opener knives

Posted: Mon Jan 11, 2021 10:14 pm
by bronze4u
Madmarco wrote: Mon Jan 11, 2021 8:36 pm
bronze4u wrote: Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...

Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...

ring turn Birks 1.jpgring turn Birks.jpg
Hi B4U! I'm not at all familiar with ring-turn knives, ::shrug:: so I'm hoping you would explain their operation to me. When you turn the ring does the blade fly open by a spring, or does the blade gradually open as you turn the ring, or...? Thanks, Mark! 8)
Madmarco, welcome

there's just a square torrent/peg through a square hole in the blade that slowly turns and opens each blade. It is said these were initially for women as to not break nails trying to open blades... Although, I have evidence they were for the blind as well...

Re: Ring opener knives

Posted: Mon Jan 11, 2021 11:35 pm
by doglegg
What a great knife b4u. I would heed knife7knuts advice and store it away from your other knives to keep it from damaging them if it out gasses further.
Celluloid gives off corrosive gasses when they begin to break down. It will sure eat up any metal around it. You have too many wonderful knives to see that happen. But that is a pretty one. Congrats. ::nod:: ::nod:: ::tu::

Re: Ring opener knives

Posted: Tue Jan 12, 2021 12:14 am
by Madmarco
bronze4u wrote: Mon Jan 11, 2021 10:14 pm
Madmarco wrote: Mon Jan 11, 2021 8:36 pm
bronze4u wrote: Mon Jan 11, 2021 8:10 pm Howdy friends
I hope everyone is safe, healthy, and in good spirits. Most importantly safe and healthy...

Have not been on in a bit (Not many ring turns floating around right now...) Did finally score this Birks ring turn! Pretty rare - as they are known for their silverware (so I am told.) Even though the main blade had obviously been snapped, I purchased it... I could not resist a new name and most of all the red/orange scales. I have looked for ring turns with red scales from the beginning of my ring turn collecting. I did reshape the main as best their job allowed me...

ring turn Birks 1.jpgring turn Birks.jpg
Hi B4U! I'm not at all familiar with ring-turn knives, ::shrug:: so I'm hoping you would explain their operation to me. When you turn the ring does the blade fly open by a spring, or does the blade gradually open as you turn the ring, or...? Thanks, Mark! 8)
Madmarco, welcome

there's just a square torrent/peg through a square hole in the blade that slowly turns and opens each blade. It is said these were initially for women as to not break nails trying to open blades... Although, I have evidence they were for the blind as well...
Thanks very much for your explanation B4U! ::handshake:: I kindda had a feeling that was how they open, but really didn't know for sure, and now you've confirmed it! ::tu:: Thanks again! 8)

Re: Ring opener knives

Posted: Tue Jan 12, 2021 12:42 am
by bronze4u
Madmarco wrote: Tue Jan 12, 2021 12:14 am
bronze4u wrote: Mon Jan 11, 2021 10:14 pm
Madmarco wrote: Mon Jan 11, 2021 8:36 pm
Hi B4U! I'm not at all familiar with ring-turn knives, ::shrug:: so I'm hoping you would explain their operation to me. When you turn the ring does the blade fly open by a spring, or does the blade gradually open as you turn the ring, or...? Thanks, Mark! 8)
Madmarco, welcome

there's just a square torrent/peg through a square hole in the blade that slowly turns and opens each blade. It is said these were initially for women as to not break nails trying to open blades... Although, I have evidence they were for the blind as well...
Thanks very much for your explanation B4U! ::handshake:: I kindda had a feeling that was how they open, but really didn't know for sure, and now you've confirmed it! ::tu:: Thanks again! 8)
Sure thing Madmarco! ::handshake:: ::tu::

Re: Ring opener knives

Posted: Tue Jan 12, 2021 12:57 am
by WillyCamaro
Hey Bronze my man, good too see you back mate!
Hope you've been healthy, staying out of trouble this past year (well, as much as you can, especially being cooped up with the missus... ::poke::).
:mrgreen:

Another great ring-turner sir! I really like the red handles on it, gives it a very unique, and distinctive look.
8)

Re: Ring opener knives

Posted: Tue Jan 12, 2021 6:57 am
by bronze4u
Hey WillyCamaro, thanks! I have been healthy and well!
Luckily, my wife and I truly get along together! Lol
But I hear that... lol I agree, the red is nice!
Hope you’ve been healthy and happy as well.

Cheers!


WillyCamaro wrote: Tue Jan 12, 2021 12:57 am Hey Bronze my man, good too see you back mate!
Hope you've been healthy, staying out of trouble this past year (well, as much as you can, especially being cooped up with the missus... ::poke::).
:mrgreen:

Another great ring-turner sir! I really like the red handles on it, gives it a very unique, and distinctive look.
8)

Re: Ring opener knives

Posted: Tue Jan 12, 2021 7:00 am
by bronze4u
Hey there! Thank you! Luckily, I store each knife individually wrapped in paper towel. They stay dry and well this way. Thanks!

doglegg wrote: Mon Jan 11, 2021 11:35 pm What a great knife b4u. I would heed knife7knuts advice and store it away from your other knives to keep it from damaging them if it out gasses further.
Celluloid gives off corrosive gasses when they begin to break down. It will sure eat up any metal around it. You have too many wonderful knives to see that happen. But that is a pretty one. Congrats. ::nod:: ::nod:: ::tu::

Re: Ring opener knives

Posted: Thu Apr 08, 2021 4:45 pm
by bronze4u
Hey guys! Hope everyone and everything is good.
My wife and I took on our first vaccine doses, yesterday. It was like a well-oiled machine where we went for it.
I was never one to get a 'flu shot' or a polymer handgun for that matter -
But figured I’d better grab both! (never say never! I already had the baby 'G'! Just have had it out making upgrades on it.)
Anyhow, I am posting a new ring turn! I really like the uniqueness of this puppy. L.S.M. German sterling. For a small knife, this one has some weight to it!

Re: Ring opener knives

Posted: Thu Apr 08, 2021 8:06 pm
by TPK
bronze4u wrote: Thu Apr 08, 2021 4:45 pm Hey guys! Hope everyone and everything is good.
My wife and I took on our first vacations, yesterday. It was like a well-oiled machine where we went for it.
I was never one to get a 'flu shot' or a polymer handgun for that matter -
But figured I’d better grab both! (never say never! I already had the baby 'G'! Just have had it out making upgrades on it.)
Anyhow, I am posting a new ring turn! I really like the uniqueness of this puppy. L.S.M. German sterling. For a small knife, this one has some weight to it!
Very nice looking little pen knife! ::tu:: Congrats! ::handshake:: ::super_happy::

Re: Ring opener knives

Posted: Thu Apr 08, 2021 8:12 pm
by bronze4u
Thank you, TPK!
::handshake::

Re: Ring opener knives

Posted: Thu Apr 08, 2021 9:15 pm
by doglegg
Kirk, I like the 26, I like the additions to it and I love the knife. Not much use on that one. You always have great ones. ::nod:: ::nod:: ::tu:: ::tu::

Re: Ring opener knives

Posted: Fri Apr 09, 2021 3:12 am
by bronze4u
Doglegg

Thanks! Yes it has not been used or abused much at all. Here’s what I’ve done to my 26 so far:

Upgrades:
1. ‘BLACKLIST’ match grade fluted barrel
2. ‘STRYKOUT’ trigger shoe with .25 trigger & slide polishing job. 3. Pearce magazine grip extension 4. SS 16# guide-rod 5. Hogue rubber grip. 6. TLR-6 Streamlight 7. Titanium back plate ( smooth) 8. About to add: Black SS dimple pin set 9. About to add: Trijicon HD XR Night Sight Set. 10. About to add: Ghost ultimate 3.5 lb trigger connector.

Re: Ring opener knives

Posted: Fri Apr 09, 2021 3:59 am
by WillyCamaro
Custom ring-turner. Custom Glock. What's not to love!
::tu::

Re: Ring opener knives

Posted: Fri Apr 09, 2021 4:46 am
by bronze4u
::tu:: ::handshake::

Re: Ring opener knives

Posted: Fri Apr 09, 2021 2:01 pm
by 1967redrider
Two winners there! ::tu:: ::tu::