A Little TLC For An Old Pradel 248
- herbva
- Gold Tier

- Posts: 2074
- Joined: Thu Oct 11, 2018 7:18 pm
- Location: The Old Dominion
A Little TLC For An Old Pradel 248
As you can see in the first 3 pics, this old guy was quite a mess when I got it. But I love these sturdy, old French knives, and the seller (a very nice guy) let me have it for 12 bucks. The first 3 pics are screen shots from the auction. I thought Gabon ebony would look good on this old guy (and I happen to have a lot of it on hand). Except for the scales, everything is solid, thick steel, and once I got all the rust off and straightened out the liners, the only lasting damage is a bit of residual pitting. I used all steel pins to try keep it original. It has a massive, thick spring, and when I got it back together, I was amazed at the cracking snap. The only tricky part was getting the scales to match up tight with the bolsters. You can't see it in the pictures, but the back edge of the bolsters are not only curved, they are also angled at a slant. I did a bit digging, and I borrowed the bit below from Mr. Google, but I haven't been able to come up with an explanation of what the 248 stands for. Maybe an address? Any ideas?
First produced in 1867, these knives were originally used by sailors and farm workers in maritime regions, mainly Normandy and Brittany, before becoming popular in other regions as well.
First produced in 1867, these knives were originally used by sailors and farm workers in maritime regions, mainly Normandy and Brittany, before becoming popular in other regions as well.
"Better to do something imperfectly, than to do nothing flawlessly." ~ Robert H. Schuller
Herb
Herb
- Beavertail
- Posts: 1202
- Joined: Sun Feb 24, 2008 9:47 pm
- Location: Way down south in Dixie
Re: A Little TLC For An Old Pradel 248
You did a great job getting this old veteran back in service! 
Tim
- Nev52
- Posts: 1243
- Joined: Thu Sep 14, 2017 12:37 am
- Location: Pennsylvania
Re: A Little TLC For An Old Pradel 248
Great Save!!
I think it looks great.
Nev
I think it looks great.
Nev
-
beresman
- Silver Tier

- Posts: 609
- Joined: Fri Jul 24, 2020 7:19 pm
- Location: Ohio
- Contact:
Re: A Little TLC For An Old Pradel 248
That looks great!
I don't have an answer to your question, but I do have a question of my own: I've seen numerous knives marked "Pradel" with a variety of graphic logos stamped into the blade next to the name. I did a bit of an online search to see what the different logos might mean, and didn't come up with anything (but I did read that the name was copied and used (counterfeited?) by a number of makers, because of the commercial success the original maker had. It is a single data point, and I read it on the internet, so that may or may not be entirely accurate.
Anyway, any idea what the different logos might mean? I'm a sucker or interesting tang stamps, and those have caught my eye more than once, but I haven't bought any because...well, I've bought enough knives without researching, and I'm trying to get smart. And I don't mean Don Adams (though I wouldn't say no to an Agent 99).
I don't have an answer to your question, but I do have a question of my own: I've seen numerous knives marked "Pradel" with a variety of graphic logos stamped into the blade next to the name. I did a bit of an online search to see what the different logos might mean, and didn't come up with anything (but I did read that the name was copied and used (counterfeited?) by a number of makers, because of the commercial success the original maker had. It is a single data point, and I read it on the internet, so that may or may not be entirely accurate.
Anyway, any idea what the different logos might mean? I'm a sucker or interesting tang stamps, and those have caught my eye more than once, but I haven't bought any because...well, I've bought enough knives without researching, and I'm trying to get smart. And I don't mean Don Adams (though I wouldn't say no to an Agent 99).
Brent
- rea1eye
- Posts: 2659
- Joined: Fri Mar 13, 2015 2:59 am
Re: A Little TLC For An Old Pradel 248
What you did to that knife was on par to a miracle.
Bob
Bob
- herbva
- Gold Tier

- Posts: 2074
- Joined: Thu Oct 11, 2018 7:18 pm
- Location: The Old Dominion
Re: A Little TLC For An Old Pradel 248
Brent, here is a link. If you scroll down to the post by Trail, I think you will have your answer. viewtopic.php?t=21642&start=240beresman wrote: ↑Sun Feb 06, 2022 7:25 pm That looks great!
I don't have an answer to your question, but I do have a question of my own: I've seen numerous knives marked "Pradel" with a variety of graphic logos stamped into the blade next to the name. I did a bit of an online search to see what the different logos might mean, and didn't come up with anything (but I did read that the name was copied and used (counterfeited?) by a number of makers, because of the commercial success the original maker had. It is a single data point, and I read it on the internet, so that may or may not be entirely accurate.
Anyway, any idea what the different logos might mean? I'm a sucker or interesting tang stamps, and those have caught my eye more than once, but I haven't bought any because...well, I've bought enough knives without researching, and I'm trying to get smart. And I don't mean Don Adams (though I wouldn't say no to an Agent 99).
I have a few Laguiole knives and its the same story. Laguiole is also near Thiers and a number of competing knifemakers copied each other's work and even used some of the same symbols.
"Better to do something imperfectly, than to do nothing flawlessly." ~ Robert H. Schuller
Herb
Herb
- herbva
- Gold Tier

- Posts: 2074
- Joined: Thu Oct 11, 2018 7:18 pm
- Location: The Old Dominion
Re: A Little TLC For An Old Pradel 248
Thanks Bob. That is very kind of you. Sometimes when you get the knife apart and remove all the crud and rust, it's in much better shape than it appeared, and unfortunately, other times, it can be the exact opposite.
"Better to do something imperfectly, than to do nothing flawlessly." ~ Robert H. Schuller
Herb
Herb
- Madmarco
- Gold Tier

- Posts: 12039
- Joined: Wed May 20, 2020 12:09 am
- Location: Smack dab in the middle of Canada
Re: A Little TLC For An Old Pradel 248
Herb, I WANT THAT KNIFE!!! I am a HUGE fan of those French Pradel's and what you did to that old piece of junk is nothing short of spectacular! Ebony happens to be my favorite cover material too! There is a pretty nice model I have on my Watchlist currently on ebay for about $30.-B.I.N. and after seeing yours I'm gonna pull the trigger! You have restored a tired old knife into a virtually new knife that you will enjoy for many years to come! Congratulations on such a cool project!

-
Reverand
- Gold Tier

- Posts: 4467
- Joined: Mon Oct 22, 2018 6:45 pm
- Location: Pisgah, AL
- Contact:
Re: A Little TLC For An Old Pradel 248
That knife is spectacular, Herb!
The Gabon ebony was the perfect choice. It really makes those pins "pop", and it looks altogether classy!
Magnificent!
The Gabon ebony was the perfect choice. It really makes those pins "pop", and it looks altogether classy!
Magnificent!
Jesus is life.
Everything else is just a hobby.
~Reverand
Everything else is just a hobby.
~Reverand
- Jeffinn
- Posts: 2091
- Joined: Fri Nov 10, 2017 3:16 am
- Location: Roseville, Mi
- Contact:
Re: A Little TLC For An Old Pradel 248
What an amazing save! I probably would not have bought a knife in that condition. You've got a good eye!
Jeff
Jeff
Hey … it’s a pocketknife for gosh sakes. I’m not selling the Mona Lisa….Bullitt4001
https://www.jfinamoreknives.com
http://www.secondlifeknives.com
https://www.jfinamoreknives.com
http://www.secondlifeknives.com
- Meridian_Mike
- Posts: 5041
- Joined: Mon Apr 21, 2014 8:36 pm
- Location: Mississippi
Re: A Little TLC For An Old Pradel 248
Great save Herb!
Nice work!

Nice work!
"Life is tough.... but it's tougher if you're stupid."....John Wayne
- glennbad
- Gold Tier

- Posts: 8174
- Joined: Mon May 15, 2006 11:13 am
- Location: NH
Re: A Little TLC For An Old Pradel 248
Wow, that was a labor of love, and a heck of a save!