WHAT ARE YOU CARRYIN RIGHT NOW? WHAT IS YOUR FAV EDC?

[doglegg]

Well done Nev.
John

Agree.

[Quick Steel]

I like both of your knives Nev.

[dlr110]

I am carrying 2 knife projects I completed.
One is a old barlow I rehandled with cherry wood.
The trapper was a knife kit I built and added oak scales I made from old fence boards.

knife projects.jpg

Looking good! The next thing you know we'll be sending our knives to you for refurbishing and new handles.

[Quick Steel]

[Nev52]

Thank you all for your comments. I have a long way to go. But it is a fulfilling hobby so far.

Regards
Nev 52

[Steve Warden]

Havin' fun with a Hen and Rooster stockman and some funky '67s.

[Ivoryman]

I am carrying 2 knife projects I completed.
One is a old barlow I rehandled with cherry wood.
The trapper was a knife kit I built and added oak scales I made from old fence boards.

knife projects.jpg

Excellent work, really like the oak. Could you tell me on a rehandle job, not the kit, what you do with the old pins that were dinged up or messed with after removing the old scales? How do you get them, or new pins, back in order to accept the new scales and still have room for peening? And do you have a stiddy? Thanks for the tips if you have any. Great to see the work and finished product. You did great in my book. Keep it up and you'll have customers beating a path to your door.

[phil0175]

Havin' fun with a Hen and Rooster stockman and some funky '67s.
20220108_141004.jpg

I like that Hen and Rooster! That’s sweet!

Phil

[DM11]

Different carry than normal. Got these two in this week so decided to load'um up and give them a go. Queen City Jack and a Schrade Walden Bos'n's Mate

[edge213]

Different carry than normal. Got these two in this week so decided to load'um up and give them a go. Queen City Jack and a Schrade Walden Bos'n's Mate

I like that Queen City David.

[garddogg56]

WOW guys nice carries Bokers were my Saturday carries as this barlow is my favorite to carry

[Nev52]

I am carrying 2 knife projects I completed.
One is a old barlow I rehandled with cherry wood.
The trapper was a knife kit I built and added oak scales I made from old fence boards.

knife projects.jpg

Excellent work, really like the oak. Could you tell me on a rehandle job, not the kit, what you do with the old pins that were dinged up or messed with after removing the old scales? How do you get them, or new pins, back in order to accept the new scales and still have room for peening? And do you have a stiddy? Thanks for the tips if you have any. Great to see the work and finished product. You did great in my book. Keep it up and you'll have customers beating a path to your door.

Thanks's for your support on the projects. On the barlow I used epoxy on the scales. The original scales were plastic. no pins used. As for pins I purchased pin stock from jantz knife supply. As far as a stiddy no I do not have one. I have a 200 pound anvil I use for working on equipment.
Regards Nev-52

[Steve Warden]

Havin' fun with a Hen and Rooster stockman and some funky '67s.
20220108_141004.jpg

I like that Hen and Rooster! That’s sweet!

Phil

Thank you, Phil.
Mixed feelings about it. Walk and talk on the clip is a bit soft. The blades show evidence of my lack of freehand skill on a stone, but she'll take a keen edge with my Lansky box.

All y'all carrying knives to be proud of!

[doglegg]

David, garddogg you fellows are rocking it.!!!

[1967redrider]

Nothing unusual for me today. Excellent choices.

[DM11]

Thank you David and Floyd!

[Ivoryman]

I am carrying 2 knife projects I completed.
One is a old barlow I rehandled with cherry wood.
The trapper was a knife kit I built and added oak scales I made from old fence boards.

knife projects.jpg

Excellent work, really like the oak. Could you tell me on a rehandle job, not the kit, what you do with the old pins that were dinged up or messed with after removing the old scales? How do you get them, or new pins, back in order to accept the new scales and still have room for peening? And do you have a stiddy? Thanks for the tips if you have any. Great to see the work and finished product. You did great in my book. Keep it up and you'll have customers beating a path to your door.

Thanks's for your support on the projects. On the barlow I used epoxy on the scales. The original scales were plastic. no pins used. As for pins I purchased pin stock from jantz knife supply. As far as a stiddy no I do not have one. I have a 200 pound anvil I use for working on equipment.
Regards Nev-52

Thanks for the info big time. One more question if you don't mind. Do you solder the new pin stock to the liners or flair them out to fill a hold from the old ones or what? Thanks a bunch. Have always wondered how they do that. Thanks again.

[cody6268]

Buck 501 Goodfella SFO

Burlap Micarta/CPM-154

[Ivoryman]

Love the burlap cody. About my favorite micarta period. Sweet knife.

[TPK]

Havin' fun with a Hen and Rooster stockman and some funky '67s.
20220108_141004.jpg

X-4

[Bladesman]

The top and bottom ones today

[TPK]

A01E995D-0E7F-47AD-9C8F-B7A007A4CD9A.jpeg
The top and bottom ones today

Nice looking selection Bladesman!

[TPK]

Had to switch out my EDC's so I can show off my newest Hot Wheels.

Got out a few those "don't get out much" typ of knives this time. Great EDC's, they just get overlooked most of the time. Gonna try one clipped into my watch pocket today. See how I like that. Today's starting line up is a Case Trapper, Robi Klaas Kissing Crane Stockman, Imperial Pony Jack & I seem to have forgotten the 4th brand. China!

Oh, & a GTO. I'd love to have a car like this! Especially a convertable!
If anybody wants to send me one, please fill the glove box with pocket knives, the trunk with Pop-Tarts & the tank with gas. That would be fine. Thank you in advanced! I appreciate it!

Edit: OK, so don't worry about the gas, that's just asking too much. Sorry!

Thanks for looking friends!
Have a great Sunday & Stay Safe Friends!

[Quick Steel]

I'm liking that Imperial Pony Jack. Certainly makes for a light carry.

[Quick Steel]