knife recommendation

[simpsoncelloteacher]

Hello,
I am new to this forum. Love it so far! I am a school teacher in California. It is my understanding that CA laws states the only knife I can take on a k-12 school campus must be non-locking with a blade less than 2.5". I want a knife that I can put in my pocket every day, even when I go in to work. So I would love to get some model recommendations from you. I am originally from Pennsylvania so I am partial to PA manufacturers like Case and stuff from Titusville. I like classic looking stuff and modern. Looking for something that looks good with good quality steel. It will be a knife that I use lightly, for opening boxes and stuff like that. Looking for something in the $100-$200 range.
Thanks in advance! ~Andrew

[Steve Warden]

Hi Andrew! Welcome aboard from the east side!
I'm partial to Case, myself.
Www.casexx.com
Click on the PATTERN tab, then look for Pen, Peanut, or anything starting with Small.
Lots to choose from!

[CluelessNick]

Don't really have any advice for you Andrew but welcome to the forum. You'll find lots of friendly people here willing to help.---Nick

[Railsplitter]

These Fallkniven LTC's have a 2.25 inch blade of 3G steel. Anodized Aluminum handles. Priced below your bottom line.

Buck will soon be releasing a model 250 Saunter with Carbon Fiber handles and S35VN blade steel. Blade is right at 2.5 inches but it's a sweet looking Drop Point blade similar to the LTC's above. Priced within your range. Sorry but I don't have a picture of this one as it is not released yet.

[1967redrider]

A mini/baby Copperhead would work for you-

https://www.casexx.com/Details/?Product ... 5&Patid=34

And to AAPK!

[Quick Steel]

First, welcome aboard simpsoncelloteacher. Good suggestions have already been offered. I'd like to point out that it is not uncommon, in fact it is not unusual for a knife to become lost. I think this is especially true when one is not used to carrying one on a daily basis.
Thus, you might consider starting with a lower priced model such as the Case Copperhead mentioned previously. Easy to replace without a lot of expense. Also you can up grade as you gain experience.

[cudgee]

Another one i would consider is a Case 1/2 whittler, very good compact EDC knives.

[Mumbleypeg]

If I were you I’d go to the Case web site www.caseknives.com, scroll down to the bottom of the page, click on “Case Dealers”, then “Find a Dealer”. Input your town or zip code, etc. Go to dealers near you, find what you like that meets your criteria. While you’re on the website if you look around at the various patterns you can drill down to the specifications, which will tell you blade lengths on each pattern. Or you can always measure them at the dealer.

The search is part of the fun, and you can’t beat looking at the various knives at the dealer. Looking for knives on line just isn’t the same.

Ken

[Sharpnshinyknives]

Here is one you might consider from GEC. Welcome to the forum by the way.

[Paladin]

Here is one you might consider from GEC. Welcome to the forum by the way.

Excellent choice here. Quality knife, great handles, and from the right location. Fits your specs in all regards and to the forum.

Ray

[simpsoncelloteacher]

Hi Andrew! Welcome aboard from the east side!
I'm partial to Case, myself.
Www.casexx.com
Click on the PATTERN tab, then look for Pen, Peanut, or anything starting with Small.
Lots to choose from!

Steve, Thanks for the tips. Good to know those search terms for my hunt! I will head over to the Case website. Happy New Year!

[simpsoncelloteacher]

Don't really have any advice for you Andrew but welcome to the forum. You'll find lots of friendly people here willing to help.---Nick

Thanks for the warm welcome Nick

[simpsoncelloteacher]

These Fallkniven LTC's have a 2.25 inch blade of 3G steel. Anodized Aluminum handles. Priced below your bottom line.
Fallkniven LTC.jpg

Buck will soon be releasing a model 250 Saunter with Carbon Fiber handles and S35VN blade steel. Blade is right at 2.5 inches but it's a sweet looking Drop Point blade similar to the LTC's above. Priced within your range. Sorry but I don't have a picture of this one as it is not released yet.

Railsplitter, Awesome. Thanks for these great ideas. Ha, you hit the nail on the head in so many ways. I actually just recently ordered the Buck Spitfire with s35vn. I have another tactical knife with that steel that I love. (Pro-Tech TR-5). Also, I have a very distant familial connection to the Buck family. Also, Buck started where I live. Here in San Diego. So I love buck too.

Okay, I do have a couple questions for you. 1. How do you know that Buck is releasing this model 250? Where does one learn about these releases. 2. What is the best way to get my hands on one when they are released?

Also, the Fallkniven LTC's look really cool. That's a new brand to me. Thanks! and Happy New Year! ~Andrew

[simpsoncelloteacher]

A mini/baby Copperhead would work for you-

https://www.casexx.com/Details/?Product ... 5&Patid=34

And to AAPK!

1967redrider, Thanks! This knife looks great. Love the green scales. Dimensions look perfect too. Like that I can get it for around $50. Oh man so many great options. Thanks for the welcome! Happy New Year! ~Andrew

[simpsoncelloteacher]

First, welcome aboard simpsoncelloteacher. Good suggestions have already been offered. I'd like to point out that it is not uncommon, in fact it is not unusual for a knife to become lost. I think this is especially true when one is not used to carrying one on a daily basis.
Thus, you might consider starting with a lower priced model such as the Case Copperhead mentioned previously. Easy to replace without a lot of expense. Also you can up grade as you gain experience.

Quick Steel, Oh yeah, good point. I probably should start with a cheaper model until I get used to carrying every day. Nice thing is with a small blade I can keep it in my pocket even when I go in to work. Happy New Year! ~Andrew

[Railsplitter]

These Fallkniven LTC's have a 2.25 inch blade of 3G steel. Anodized Aluminum handles. Priced below your bottom line.
Fallkniven LTC.jpg

Buck will soon be releasing a model 250 Saunter with Carbon Fiber handles and S35VN blade steel. Blade is right at 2.5 inches but it's a sweet looking Drop Point blade similar to the LTC's above. Priced within your range. Sorry but I don't have a picture of this one as it is not released yet.

Railsplitter, Awesome. Thanks for these great ideas. Ha, you hit the nail on the head in so many ways. I actually just recently ordered the Buck Spitfire with s35vn. I have another tactical knife with that steel that I love. (Pro-Tech TR-5). Also, I have a very distant familial connection to the Buck family. Also, Buck started where I live. Here in San Diego. So I love buck too.

Okay, I do have a couple questions for you. 1. How do you know that Buck is releasing this model 250? Where does one learn about these releases. 2. What is the best way to get my hands on one when they are released?

Also, the Fallkniven LTC's look really cool. That's a new brand to me. Thanks! and Happy New Year! ~Andrew

1. I know about the 250 from being a member of the Buck Collectors Club but here is a post with some catalog pictures and a description. Scroll down a bit within the first post and you'll see the 250 Saunter.
https://bladeforums.com/threads/2022-ca ... t.1827364/
2. Getting your hands on one shouldn't be too difficult. "Shouldn't" being the operative word here as they are allegedly a Limited Edition offering. Just check the Buck website periodically or follow that thread that I linked above. MAP pricing is set at $159.99 which means that's the minimum amount that dealers are required to charge. They can charge more than MAP but not less.

Good luck in your search!

[simpsoncelloteacher]

Another one i would consider is a Case 1/2 whittler, very good compact EDC knives.

IMAG0642.jpg

cudgree,
These look great! Thanks for the suggestion. I came across the Seahorse Whittle when I was looking at the 1/2 whittler (haha, funny name, perfect for me) Happy New Year, Andrew

[simpsoncelloteacher]

Here is one you might consider from GEC. Welcome to the forum by the way.

Sharpshinyknives, These things look really awesome. They look super good quiality. So small at 1.5" blade. Wow. But less than $100 so that's good. GEC looks like a great outfit. Happy New Year. ~Andrew

[Sharpnshinyknives]

Here is one you might consider from GEC. Welcome to the forum by the way.

Sharpshinyknives, These things look really awesome. They look super good quiality. So small at 1.5" blade. Wow. But less than $100 so that's good. GEC looks like a great outfit. Happy New Year. ~Andrew

Hello Andrew, glad you like them, it seemed just right. If you have any trouble finding one, I have a couple that I will sell, just send me a PM or email.
Thanks, Mark

[simpsoncelloteacher]

These Fallkniven LTC's have a 2.25 inch blade of 3G steel. Anodized Aluminum handles. Priced below your bottom line.
Fallkniven LTC.jpg

Buck will soon be releasing a model 250 Saunter with Carbon Fiber handles and S35VN blade steel. Blade is right at 2.5 inches but it's a sweet looking Drop Point blade similar to the LTC's above. Priced within your range. Sorry but I don't have a picture of this one as it is not released yet.

Railsplitter, Awesome. Thanks for these great ideas. Ha, you hit the nail on the head in so many ways. I actually just recently ordered the Buck Spitfire with s35vn. I have another tactical knife with that steel that I love. (Pro-Tech TR-5). Also, I have a very distant familial connection to the Buck family. Also, Buck started where I live. Here in San Diego. So I love buck too.

Okay, I do have a couple questions for you. 1. How do you know that Buck is releasing this model 250? Where does one learn about these releases. 2. What is the best way to get my hands on one when they are released?

Also, the Fallkniven LTC's look really cool. That's a new brand to me. Thanks! and Happy New Year! ~Andrew

1. I know about the 250 from being a member of the Buck Collectors Club but here is a post with some catalog pictures and a description. Scroll down a bit within the first post and you'll see the 250 Saunter.
https://bladeforums.com/threads/2022-ca ... t.1827364/
2. Getting your hands on one shouldn't be too difficult. "Shouldn't" being the operative word here as they are allegedly a Limited Edition offering. Just check the Buck website periodically or follow that thread that I linked above. MAP pricing is set at $159.99 which means that's the minimum amount that dealers are required to charge. They can charge more than MAP but not less.

Good luck in your search!

Thanks again Railsplitter. I will get registered at Bladeforums and check out the catalog. I'm going to keep my eye out for the 250. I like the Fallkniven LTC's too. Specifically designed to be legal. All the regulations here in CA are ridiculous! But I'll jump through the hoops.

[simpsoncelloteacher]

Okay, I saw the Buck 250 Saunter and it looks really good. And I can put a lanyard on it too, which I like.

[Railsplitter]

Okay, I saw the Buck 250 Saunter and it looks really good. And I can put a lanyard on it too, which I like.

I’ll be getting a Saunter myself and there’s a good chance that I might get two.

[gordonjohn]

Hi and welcome to AAPK , I think you cant go wrong with a case or the buck they are both great knives . Happy New Year

[simpsoncelloteacher]

Hi and welcome to AAPK , I think you cant go wrong with a case or the buck they are both great knives . Happy New Year

Thanks gordonjohn. Happy New Year!

[kootenay joe]

What i like about GEC and Fallkniven knives is that they arrive with truly sharp edges. Many other brands arrive with rather dull blades that require further sharpening before they will cut/slice effectively.
kj