Found this today... Any ideas?
-
LibertyKeeper
- Posts: 84
- Joined: Sun Oct 31, 2021 9:12 pm
- Location: Iowa
Found this today... Any ideas?
My 91 yr old Dad recently passed away.
I found this (coin-type knife? Watch fob knife?) in his things in a keepsake box along with his Korean War and China service medals from his 1947-1951 naval service.
Any thoughts on what this is? heritage? manufacturer?
I found this (coin-type knife? Watch fob knife?) in his things in a keepsake box along with his Korean War and China service medals from his 1947-1951 naval service.
Any thoughts on what this is? heritage? manufacturer?
- FRJ
- Gold Tier

- Posts: 17147
- Joined: Fri May 14, 2010 1:43 pm
- Location: Ct.
Re: Found this today... Any ideas?
Funny, I just posted two of mine in the "Figural Knives" thread.
Joe
- FRJ
- Gold Tier

- Posts: 17147
- Joined: Fri May 14, 2010 1:43 pm
- Location: Ct.
Re: Found this today... Any ideas?
Jim, I could have done a better job of responding to your post.
Sorry to hear of your fathers passing. He was an obvious Patriot as I am sure you are too.
Sorry to hear of your fathers passing. He was an obvious Patriot as I am sure you are too.
Joe
-
LibertyKeeper
- Posts: 84
- Joined: Sun Oct 31, 2021 9:12 pm
- Location: Iowa
- FRJ
- Gold Tier

- Posts: 17147
- Joined: Fri May 14, 2010 1:43 pm
- Location: Ct.
Re: Found this today... Any ideas?
I guess the best way to describe them is they are knives that resemble figures of some shape.
Look for the "Figural Knives" thread in Knife Lore. There are a few in there.
Look for the "Figural Knives" thread in Knife Lore. There are a few in there.
Joe
-
LibertyKeeper
- Posts: 84
- Joined: Sun Oct 31, 2021 9:12 pm
- Location: Iowa
- FRJ
- Gold Tier

- Posts: 17147
- Joined: Fri May 14, 2010 1:43 pm
- Location: Ct.
Re: Found this today... Any ideas?
I think the object itself determines figural.
And frankly, I'm hoping that these are indeed figural. It seems like they should be but I could be wrong.
I called them coin knives, maybe they're medal knives. I don't really know.
And frankly, I'm hoping that these are indeed figural. It seems like they should be but I could be wrong.
I called them coin knives, maybe they're medal knives. I don't really know.
Joe
- New_Windsor_NY
- Gold Tier

- Posts: 14090
- Joined: Thu Nov 08, 2018 4:50 pm
- Location: I'm On The Far Right On The Left Coast In Commiefornia
Re: Found this today... Any ideas?
It looks like the tang stamp says VOOS - STAINLESS.
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales
Skip
- Beavertail
- Posts: 1202
- Joined: Sun Feb 24, 2008 9:47 pm
- Location: Way down south in Dixie
- Ridgegrass
- Gold Tier

- Posts: 8136
- Joined: Sun Aug 30, 2020 2:04 pm
- Location: Ocean City, MD
- Contact:
Re: Found this today... Any ideas?
Condolences on your loss.
First Voos (New Haven, CT.1921-1980's), Iv'e ever seen. Many were advertising giveaways by Ambassador (Colonial) in the 30's-50's.
Not saying it is but the pic looks like gold. ?? Nice little keepsake from your Dad.
J.O'.
First Voos (New Haven, CT.1921-1980's), Iv'e ever seen. Many were advertising giveaways by Ambassador (Colonial) in the 30's-50's.
Not saying it is but the pic looks like gold. ?? Nice little keepsake from your Dad.
-
eveled
- Posts: 2582
- Joined: Sun Oct 29, 2017 9:37 pm
Re: Found this today... Any ideas?
Sorry for your loss.
My first thought was that it looked like gold. It’s beautifully made. I would have called it a coin knife.
My first thought was that it looked like gold. It’s beautifully made. I would have called it a coin knife.
- RobesonsRme.com
- Posts: 10131
- Joined: Wed Jan 28, 2009 3:44 pm
- Location: The Heart of Dixie.
- Contact:
Re: Found this today... Any ideas?
Lots of people have called these cigar cutters.
I find it difficult to believe that was ever gheir intent and if so, very poorly designed for that purpose.
Charlie Noyes
I find it difficult to believe that was ever gheir intent and if so, very poorly designed for that purpose.
Charlie Noyes
DE OPPRESSO LIBER
"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "
Sidlow Baxter
"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "
Sidlow Baxter
- Beavertail
- Posts: 1202
- Joined: Sun Feb 24, 2008 9:47 pm
- Location: Way down south in Dixie
Re: Found this today... Any ideas?
I've got the one my Grandfather had.RobesonsRme.com wrote: ↑Sat Nov 20, 2021 5:36 pm Lots of people have called these cigar cutters.
I find it difficult to believe that was ever gheir intent and if so, very poorly designed for that purpose.
Charlie Noyes
I remember him using it to cut the tip of his cigars.
Its advertising Coca-Cola. I tried to find it but it looks like this one I found online.
Tim
- Mumbleypeg
- Gold Tier

- Posts: 15734
- Joined: Fri Apr 18, 2014 1:28 am
- Location: Republic of Texas
Re: Found this today... Any ideas?
FWIW.
I’ve always heard those referred to as coin knives. IMHO they fall into the figural knife category because they have the shape of a coin. By virtue of the ring/bale attachment on many of them I believe they were used as watch fob knives during the time when men carried pocket watches. The OP knife appears to be gold plated, which was commonplace for watch fob knives. Looks like it was possibly made to be engraved on the shield area (although I see no signs of engraving in the pictures provided).
I agree with Charlie - poor design for a cigar cutter. Certainly could be used for that purpose though.
Ken
I’ve always heard those referred to as coin knives. IMHO they fall into the figural knife category because they have the shape of a coin. By virtue of the ring/bale attachment on many of them I believe they were used as watch fob knives during the time when men carried pocket watches. The OP knife appears to be gold plated, which was commonplace for watch fob knives. Looks like it was possibly made to be engraved on the shield area (although I see no signs of engraving in the pictures provided).
I agree with Charlie - poor design for a cigar cutter. Certainly could be used for that purpose though.
Ken
Member AKTI, TSRA, NRA.
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
-
LibertyKeeper
- Posts: 84
- Joined: Sun Oct 31, 2021 9:12 pm
- Location: Iowa
Re: Found this today... Any ideas?
I would have to have it acid tested to see if gold
My guess is rolled gold (gold rolled over brass... Which makes it only 5-10% gold vs much higher percent in 10k, 14k etc gold
Yes cool keepsake made by VOOS and I'd call it coin knife
Here's a couple of better pics... Click on for higher resolution
My guess is rolled gold (gold rolled over brass... Which makes it only 5-10% gold vs much higher percent in 10k, 14k etc gold
Yes cool keepsake made by VOOS and I'd call it coin knife
Here's a couple of better pics... Click on for higher resolution
-
LibertyKeeper
- Posts: 84
- Joined: Sun Oct 31, 2021 9:12 pm
- Location: Iowa
Re: Found this today... Any ideas?
I would have to have it acid tested to see if gold
My guess is rolled gold (gold rolled over brass... Which makes it only 5-10% gold vs much higher percent in 10k, 14k etc gold
Yes cool keepsake made by VOOS and I'd call it coin knife
Here's a couple of better pics... Click on for higher resolution
My guess is rolled gold (gold rolled over brass... Which makes it only 5-10% gold vs much higher percent in 10k, 14k etc gold
Yes cool keepsake made by VOOS and I'd call it coin knife
Here's a couple of better pics... Click on for higher resolution
- Miller Bro's
- Gold Tier

- Posts: 13631
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Found this today... Any ideas?
The case is brass with a plating on it, never seen one solid gold.
These were inexpensive knives when new and yes in some ads they were advertised as cigar cutters, usually those had a small hole in the cover to insert the tip of the cigar, (Cheroot), to cut the tip off.
Nice little knife, welcome aboard
These were inexpensive knives when new and yes in some ads they were advertised as cigar cutters, usually those had a small hole in the cover to insert the tip of the cigar, (Cheroot), to cut the tip off.
Nice little knife, welcome aboard
AAPK Janitor
369
369
-
LibertyKeeper
- Posts: 84
- Joined: Sun Oct 31, 2021 9:12 pm
- Location: Iowa
Re: Found this today... Any ideas?
Thank you, glad to be here and am having fun learning about knives and collecting, etcMiller Bro's wrote: ↑Sun Nov 21, 2021 11:19 pm The case is brass with a plating on it, never seen one solid gold.
These were inexpensive knives when new and yes in some ads they were advertised as cigar cutters, usually those had a small hole in the cover to insert the tip of the cigar, (Cheroot), to cut the tip off.
Nice little knife, welcome aboard![]()