Who Has Brass ?

Sauconian · Post by **Sauconian** » Thu Feb 05, 2009 12:19 am

Who has brass handled vintage knives ?

They go back to at least the 1870's by Coquanoc Works, and were made by Schrade and Remington. Wolfertz is well known for them. Who else made them ? The culerys didn't make cast handles, I wonder who did ?

First is a Wolfertz 3 -3/4''
Second is a Wolfertz 3 - 3/8"
Third is a Remington R219, 3 - 3/4"

Fran

upnorth · Post by **upnorth** » Thu Feb 05, 2009 3:51 am

Here's a Schrade Cut Co. I know I've got a couple more - - somewhere.

upnorth · Post by **upnorth** » Thu Feb 05, 2009 4:05 am

Here's an interesting one; a rase knife, or timber scribe. Made by New York Knife, it is incredibly well fitted.
Blade stamped both sides, like most of the good old knives!

ea42 · Post by **ea42** » Thu Feb 05, 2009 4:27 am

Got one, these Schrades seem pretty popular around here

Fran, that Rem. is mavelous!!

Rusty1 · Post by **Rusty1** » Thu Feb 05, 2009 5:16 am

Very nice show guy's! Smooth looking Schrade Eric, first time I've seen a tree scribe with a brass handle Charlie.

Fran, The Remington looks real good for nearly falling through the cracks LOL, USPS delivering at warp factor now also?

Russell

Sauconian · Post by **Sauconian** » Thu Feb 05, 2009 5:39 am

Yeah, I'm pretty happy with the Rem. and the 24 hour delivery time too. Bought it Monday evening, and it was at the P.O. Wednesday morning !

Nice as it is, Eric's Cut Co. looks like it came out the factory door yesterday, just to have it's picture taken !

The Rem, and the Schrades too I believe, have solid handles which are quite heavy. The Wolfertz brass jacks are somewhat hollow. They also have the rim of the easy open cut-out cast into the handles, which allowed the cutler to finish any handle either with or without the EO feature.

In this photo the handle was finished " non-EO ", but you can see the highlite inside the handle which is the top of the opening for it, had it been opened up.

Fran

upnorth · Post by **upnorth** » Thu Feb 05, 2009 1:56 pm

Bleary eyed and ready for bed, I didn't comment except to post what I had nearby.
Eric and Fran, you both have some beautiful knives. Those minty ones look like a million bucks!
The brass handles are undoubtedly durable, and I've seen more than one with "tap" marks from pounding on something, but still functional. Try that with bone handles!!
An interesting cutlery concept, and great idea for a thread Fran!

Sauconian · Post by **Sauconian** » Thu Feb 05, 2009 7:08 pm

Here's another NYK rase knife like Charlie's.

I grabbed this one fast, eh Eric ?

Fran

W5RWU · Post by **W5RWU** » Fri Feb 06, 2009 1:49 am

Man all this Brass , I will have to get some these! thanks for showing these!
W5rwu

ea42 · Post by **ea42** » Fri Feb 06, 2009 5:03 am

I grabbed this one fast, eh Eric ?

I'll say, all that was left in that box of knives once I got to it were a few bone shards and a pivot pin

Eric

Sauconian · Post by **Sauconian** » Fri Feb 06, 2009 6:26 am

The next go, I'll try to distract Russell with a couple of beers and we'll give you a head start.

Fran

upnorth · Post by **upnorth** » Fri Feb 06, 2009 5:08 pm

Imagine going to a knife show with Curly, Lar . . . . . . .ummm, I mean Eric, Russell and Fran!!!

It'd be like watching Saturday morning TV when I was a kid!!

Nyuk nyuk nyuk!!

upnorth · Post by **upnorth** » Fri Feb 06, 2009 5:48 pm

This one was a pleasant surprise! I thought I was buying a worn down Hawk, but comparing it to other mint ones to be sure, that's the factory edge! Near mint, IMO!!
I'm starting to get the picture, from catalogs and from knives like this, that a Pruner didn't always have that wide blade you usually see, but there was a lot of call for a more slender, pocketable knife.
Makes me believe that life was simpler and more elegant, back in the day. You cut your own flowers, pruned your own roses, then enjoyed a fine glass of Claret in the garden, before going off to hunt a pheasant for supper!
O.K. it's a stretch

, but it's still a cool, thought-provoking knife!

orvet · Post by **orvet** » Fri Feb 06, 2009 6:55 pm

Nice brass bal…. bolsters guys!

Dale

Sauconian · Post by **Sauconian** » Fri Feb 06, 2009 9:09 pm

upnorth wrote:Imagine going to a knife show with Curly, Lar . . . . . . .ummm, I mean Eric, Russell and Fran!!!

It'd be like watching Saturday morning TV when I was a kid!!

Nyuk nyuk nyuk!!

Thanks Charlie ! 'Ya think I'm the smart one, eh ?

I've seen a lot of the English knives, still available, with blades like that called pruners ( alternate definition ). American knives seem to run more towards the ' Hawkbills.'

ea42 · Post by **ea42** » Fri Feb 06, 2009 10:25 pm

Oh, I see, the bald guy's Curly, yea I get it

Really nice how they worked a rat tail into that bolster Charlie

Eric

buck123 · Post by **buck123** » Sat Feb 07, 2009 5:33 pm

Booth Brothers Knives NJ. Not the best of shape but is the only way I can find them.
Top to bottom:
Stockholm
Boonton
Stockholm
Boonton
Boonton

Sauconian · Post by **Sauconian** » Sat Feb 07, 2009 6:45 pm

You have some rare and interesting knives Bernie !

I wish you'd post more of them.

See you at the EPKCA show in Wind Gap, Mar. 21 ??

Fran

buck123 · Post by **buck123** » Sat Feb 07, 2009 7:20 pm

OK Fran I will be there lookin for ya, and be sure to bring me about a half dozen of those old near mint Allentown Knives.

ea42 · Post by **ea42** » Sun Feb 08, 2009 4:59 am

Excellent collection Bernie, they look fine to me!

Eric

LRV · Post by **LRV** » Sun Feb 08, 2009 7:44 pm

magine going to a knife show with Curly, Lar . . . . . . .ummm, I mean Eric, Russell and Fran!!!

It'd be like watching Saturday morning TV when I was a kid!!

Nyuk nyuk nyuk!!

Hey.. I resemble that remark!
Wo wo wo woo!
Larry

Rusty1 · Post by **Rusty1** » Wed Feb 11, 2009 1:54 am

Not knowing much about the Booth Brothers knives, had cause to drive through Boonton NJ today, Nice looking brass set you have there buck123!

Larry, Mo and Curly Heh, at least we haven't been likened to the Three Ugly Sisters..........Yet!

Russell

smiling-knife · Post by **smiling-knife** » Wed Feb 11, 2009 7:01 pm

upnorth wrote:This one was a pleasant surprise! I thought I was buying a worn down Hawk, but comparing it to other mint ones to be sure, that's the factory edge! Near mint, IMO!!
I'm starting to get the picture, from catalogs and from knives like this, that a Pruner didn't always have that wide blade you usually see, but there was a lot of call for a more slender, pocketable knife.
Makes me believe that life was simpler and more elegant, back in the day. You cut your own flowers, pruned your own roses, then enjoyed a fine glass of Claret in the garden, before going off to hunt a pheasant for supper!
O.K. it's a stretch , but it's still a cool, thought-provoking knife!

This looks similar to your knife. From an early 1960s Wostenholm catalogue. Interestingly, the lettering in the catalogue is upside down. All of the knives I have seen are like yours.

smiling-knife · Post by **smiling-knife** » Wed Feb 11, 2009 7:22 pm

This knife is French circa 1950s.

s-k

upnorth · Post by **upnorth** » Thu Feb 12, 2009 12:23 am

I appreciate you putting up that Catalog cut, s-k. It is odd that the lettering is reversed! I've always been of the opinion my knife has it upside down. There is a small percentage of signature-bolstered Case Barlows, that has an "opposite" stamp as well.

Great corkscrew knife. You had to have one to do a little upland shooting!!

All About Pocket Knives

Who Has Brass ?

Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?

Re: Who Has Brass ?