Miniature Puma?
- Byrd
- Posts: 551
- Joined: Sun Feb 03, 2019 6:06 pm
- Location: Kansas
Miniature Puma?
I've had this little knife for at least 45 years and was always curious about it. Is it really a Puma? The tang only says Solingen Germany but the sheath is marked Puma. Any info anyone can give would be appreciated!
If the thunder don't get you then the lightening will!
-
kootenay joe
- Posts: 13373
- Joined: Mon Jan 11, 2016 5:36 pm
- Location: West Kootenays, B.C.
Re: Miniature Puma?
Good question. Were all Puma knives marked "PUMA" ?
I would also like to know.
The next question is: did Puma make all of their own knives. The many Solingen knife manufacturers did a lot of sub contracting.
kj
I would also like to know.
The next question is: did Puma make all of their own knives. The many Solingen knife manufacturers did a lot of sub contracting.
kj
- Byrd
- Posts: 551
- Joined: Sun Feb 03, 2019 6:06 pm
- Location: Kansas
Re: Miniature Puma?
I would imagine it's subcontracted. That's why I'm curious because every other Puma I've seen has been marked. I've never seen another little one like this either.
If the thunder don't get you then the lightening will!
-
jmh58
- Posts: 14252
- Joined: Wed Apr 02, 2008 11:22 pm
- Location: Pgh,Pa
Re: Miniature Puma?
Cant answer but that is a KOOL knife!!!
John
Not all who wander are lost!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
Of all the paths you take in life,
Make sure some of them are Dirt!!!
- jerryd6818
- Posts: 39458
- Joined: Sun Jan 04, 2009 5:23 am
- Location: Farther down the road.
Re: Miniature Puma?
Why don't you send them an email. Include a picture of the knife and ask if they made it.
[email protected]
[email protected]
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
- Byrd
- Posts: 551
- Joined: Sun Feb 03, 2019 6:06 pm
- Location: Kansas
Re: Miniature Puma?
Thanks Jerry! That'll help.
If the thunder don't get you then the lightening will!
- RevolverGuy
- Posts: 338
- Joined: Mon May 07, 2018 6:04 am
- Location: North Carolina
- Contact:
Re: Miniature Puma?
The problem with emailing or contacting Puma is that there will probably be none or maybe just a few employees who were around 45+ years ago. Contact Puma in Germany, not the USA branch. They just act as an importer. I don't think they would know anything. I do know that some of the Puma's that showed up in the USA back then were imported by Gutmann Cutlery and a few others. I think Edge Brand was another. That style knife looks a lot like the ones I have seen from that period.
- Byrd
- Posts: 551
- Joined: Sun Feb 03, 2019 6:06 pm
- Location: Kansas
Re: Miniature Puma?
Thanks Revolver Guy. That's a good idea. I've always emailed Puma USA so I'll see what they say.
If the thunder don't get you then the lightening will!
-
Gunsil
- Posts: 3081
- Joined: Fri Feb 28, 2014 5:25 pm
- Location: Lower Hudson River valley, N.Y.
Re: Miniature Puma?
I think it is just a generic German knife that has been mismatched to a Puma sheath. I have had Pumas back to the early 1930s and every one was marked Puma. The pre-war marks were different than the modern marks but they were all well marked. Puma is proud of their products and I doubt they would make one without the mark.
- Byrd
- Posts: 551
- Joined: Sun Feb 03, 2019 6:06 pm
- Location: Kansas
Re: Miniature Puma?
Thanks Gunsil, that makes a lot of sense.
If the thunder don't get you then the lightening will!
-
knife7knut
- Posts: 10697
- Joined: Tue Nov 06, 2007 9:02 pm
- Location: Tecumseh,Michigan
- Byrd
- Posts: 551
- Joined: Sun Feb 03, 2019 6:06 pm
- Location: Kansas
Re: Miniature Puma?
If the thunder don't get you then the lightening will!
-
knife7knut
- Posts: 10697
- Joined: Tue Nov 06, 2007 9:02 pm
- Location: Tecumseh,Michigan
Re: Miniature Puma?
It is actually a pin.Not sure if it is a Puma but it is a dead ringer for a 6393 Skinner.
Adventure BEFORE Dementia!
- bladecollectorr
- Posts: 620
- Joined: Tue Jan 22, 2019 1:11 am
- Location: Canada
Re: Miniature Puma?
I like Puma knives. I've done a fair bit of reading about the company's history etc. I'd also suggest your nice knife is most likely mismatched with that Puma sheath.
For all things "Puma" these three great sites can help a lot.
https://www.pumaknifeman.com/about/
https://classicpumaknives.com/
https://www.pumahunter.de/
For all things "Puma" these three great sites can help a lot.
https://www.pumaknifeman.com/about/
https://classicpumaknives.com/
https://www.pumahunter.de/
I don't always respond to great posts but I always appreciate seeing them. Thanks for posting! 
- Byrd
- Posts: 551
- Joined: Sun Feb 03, 2019 6:06 pm
- Location: Kansas
Re: Miniature Puma?
Thanks for the links bladecollector. I never heard back from multiple email to Puma, so I have to assume that you are correct, a German knife in a Puma sheath.
If the thunder don't get you then the lightening will!