Mail Call !-Post your new pick-ups here............

[treefarmer]

Reading this thread and I kept thinking Effingham was a familiar name.
The light came on, Effingham is home of AAPK and our gracious leader Bryan Sanders!
Treefarmer

[edge213]

Her are my recent pick-ups.

That Blackjack is stunning.

[ken98k]

As I understand it, there are different Blackjack knives. They were originally made in Japan but problems with the Japanese contractors forced blackjack to bring manufacture home to USA, I have never personally come across one of these Japanese made knives.
There are the $24 blackjacks made in China. The $24 knives are plentiful and easy to find.
However, there are still dealers out there that have a few of the USA made knives from before Blackjack went out of business. The USA knives are getting harder to find and much more expensive.

The bottom photo is a box for a China made Backjack.

[Sharpnshinyknives]

Here are a couple I received this past week before I got so sick.
I don't know a lot about the quality of this line of Boker knives, but
if someone wants to comment, please do.
.

I have had few Boker Magnum knives. They have some Vox designed knives and they bring pretty good money. Boker Magnum’s have the same lifetime warranty that all Bokers have. I don’t like that most are made in China, but the quality is pretty consistent and, I think, pretty good.

[TPK]

Got this Queen #48 whittler in D2 steel, in the mail, today...
Queen48.jpg

Nice find Jim!

[TPK]

Here are a couple I received this past week before I got so sick.
I don't know a lot about the quality of this line of Boker knives, but
if someone wants to comment, please do.

Hi David,

I have two Böker Magnum's. One exactly like the bottum knife you pictured. And a Mini Stockman with MOP scales. The F&F on both are super! I have never used or carried either of them yet though.

[dlr110]

The Ponder Post Rider dropped this off today.
Rough Rider Canoe/Old Southwest RR1750
.

[cody6268]

A trip to the Stihl Dealership this morning.

PS10 Folding Saw; made in Japan. Pretty solidly built, and sharp teeth. $20; and much of an upgrade over the cheap Kobalt I use currently, and a bit bigger and more capable than the small Silky that is also used a lot, for green wood. Says for branches 2" and smaller--but I know firsthand it can cut up to 4" limbs if I need to and have nothing else. I like folding saws for woods walking, and jobs where a chainsaw is either overkill, or potentially unsafe (aka above my head, or in a tree); and they are usually quicker cutting, and more capable and effective than most saws on a knife, not only due to being bigger, but the pull-cut saws tend to cut more than the push/pull variety most knives have. Weird that it's got "PULL" printed in Spanish on the blade.

Stone River "Heavy Duty" Lockblade Knife; Chinese-made; $15. OK, I wanted a Stihl branded knife in my collection. There are German-made Richartz ones made many years ago, but people want stupid money for those things on the secondary market. Feels definitely like a $15 knife from anyone but Rough Rider; and it is sharp. Blade has smooth action, strong lock, and the handle material is pretty grippy due to the rubber (albeit, plastic is not nylon, but ABS). Sheath is pretty good, with a strong enough snap that shouldn't pop open if hooked on something. I think it will work OK, just not impressive; like a Rough Rider Folding Hunter (same price), Kabar Dozier (little more money) or the Buck 110LT (five dollars more). And the Buck is made in America. I'd love for Stihl to have the 110LT replace this thing--orange handle (as already used on them for Factory Specials and SMKW), Stihl logo etched on blade, black sheath with orange piping and orange steel logo. That would be how I'd do it. They already have the 285 Bantam (which I'm having my dealer order soon); but it's got a black handle; not orange.

New aggressive "Chipper" chain for the 35 year old 011AV, which is now mine; since my folks upgraded to an MS170 for the small saw (and both saws actually have the same bar and chain). Because it doesn't have that crappy Chinese carbeuretor that floods constantly, it's easy to start. For my own saw, I wanted a vintage Stihl with about a 15" or so bar made and assembled in Germany; but since we no longer have flea markets thanks to COVID, I'm gonna have to use this one for the time being. And besides, this is new enough to have such modern features as an automatic oiler and a chain brake.

And the MS170. It is built a LOT cheaper than my 011AV, but it doesn't weigh much at all, which means I can carry it if I have to walk. My folks bought it to replace the 011AV as the backup and small jobs saw.

[cody6268]

These were in Saturday's mail, which I didn't pick up until today (it's close to a half-mile from my house to the mailbox). They only cost $20 each--disregard the prices shown on them.

Schrade USA 96OT Bearhead. Been carried and sharpened considerably. Pick and tweezers are still there. I've found some factory leftover tweezers, and bought a few as spares. No luck on the picks. I won't carry this one a whole lot, because these are mildy expensive in most cases.

Schrade USA SC505 "Seagulls" One of the brochures and the bottom of the box is to the knife; while the lid and another catalog is to the SC506 (either raccoons or pheasants; depending on year; and given the carnage they did to our hen population one year, I do NOT like racoons) Barlow. Gonna have to get the SC506 now. I love the Scrimshaws.

Really bad engraving job, however.

[Quick Steel]

This is a well made knife by Moore Maker; a 3 1/2" Stockman. The outstanding feature of this knife is its beautiful Buffalo Horn covers which are among the best I have seen having evenly spaced white striations. Sorry I couldn't get better pictures of them. I believe Sharpnshinyknives has one more similar knife.

[Quick Steel]

This 2nd knife is from Hen&Rooster which are still made in Solingen. For not much money this is a very decent knife. Based on this and a few other Hen&Rooster knives they seem to have mastered producing tight runups. The color is green leaning towards turquoise.

[Steve Warden]

Garry, those pickups need a PSA:

Warning! The following content may not be suitable for all viewers.
If you are prone to drooling over knives and insist on continuing,
please have a suitable item at the ready to properly contain any and all slobber.
AAPK nor this poster will be responsible for damage to electrical equipment caused by failure to comply with this announcement.

[Quick Steel]

Steve, I thought I knew what a PSA is, but I am sure you have something else in mind. But what?

[Steve Warden]

Steve, I thought I knew what a PSA is, but I am sure you have something else in mind. But what?

Clean thoughts here - Public Service Announcement.

[Louisville.Boy1947]

QuickSteel....from your recent addition it looks like you have a growing collection of Hen & Rooster. I would like to see more of your collection.

[Quick Steel]

Steve,

[Quick Steel]

Louisville.boy. With the two recent acquisitions, you have seen 90% of my collection of Hen & Roosters. But I'll dig around and see if I don't have some tucked away.

[Sharpnshinyknives]

This is a well made knife by Moore Maker; a 3 1/2" Stockman. The outstanding feature of this knife is its beautiful Buffalo Horn covers which are among the best I have seen having evenly spaced white striations. Sorry I couldn't get better pictures of them. I believe Sharpnshinyknives has one more similar knife.

P1030831.JPGP1030825 (2).JPGP1030826 (2).JPGP1030824 (2).JPG

Here is a picture for you Garry. I love the color on the stockman H&R you posted, that’s a beautiful green.
These two Moore Maker knives were made by Wallace Rockwell after the Camillus Custom shop closed. Both are exceptional knives.

[WillyCamaro]

From my 4 (or so) years knife collecting, every H&R i've handled, excellent. Would put them up near bulldog IMHO, or a little better.

Many are very similar to bulldog in construction (probably made in the same factory...), with slightly more refined fit n' finish. That would be the Bertarm Germany made ones. Even the ones of spainish origin are excellent quality.

Anyway,

Lovely knives fellers .

[richard]

thomaston knife co. conn.
any idea on age ?

[Shearer]

thomaston knife co. conn.
any idea on age ?

In Blade's Guide 1884 to 1930

Grant

[richard]

thank you,did not think was that old

[Railsplitter]

Camillus 23.

[Sharpnshinyknives]

Rick, that’s a very nice Camillus.

[Railsplitter]

Rick, that’s a very nice Camillus.

Thank you, Mark.