Holley Mfg. Co., Lakeville, Conn.

This forum is dedicated to the discussion and display of old knives. The rich history of all the many companies that made them through the early years will be found here as well as many fine examples of the cutlers art. Share pictures of your old knives and your knowledge here!
Post Reply
User avatar
carrmillus
Gold Tier
Gold Tier
Posts: 6293
Joined: Sun Nov 14, 2010 9:22 pm
Location: tupelo, miss.

Re: Holley Mfg. Co., Lakeville, Conn.

Post by carrmillus »

....that is one brand that is on my "bucket" list!!!!....great find!!!!.......... ::tu:: ::tu:: ::tu:: ..........
User avatar
LongBlade
Posts: 3417
Joined: Mon May 18, 2015 3:00 pm
Location: Woods of CT

Re: Holley Mfg. Co., Lakeville, Conn.

Post by LongBlade »

Great score John ::tu:: ::tu:: ... looks to be in great condition - not an easy find for an old Holley! Shield is cool and blade swedges are so crisp 8) ...
____________________________________________________________________________
Lee
Robo
Posts: 252
Joined: Thu Apr 27, 2017 12:37 am

Re: Holley Mfg. Co., Lakeville, Conn.

Post by Robo »

FRJ wrote:Here's a nice old pearl sleaveboard whittler that has seen some time in the saddle. 3 9/16" closed.

Great looking knife--love the top-grind on the big blade! Thanks for sharing!
User avatar
gsmith7158
Gold Tier
Gold Tier
Posts: 8617
Joined: Fri Dec 25, 2015 7:25 pm
Location: Canton, Ga. 100% of the time
Contact:

Re: Holley Mfg. Co., Lakeville, Conn.

Post by gsmith7158 »

That's a great one John! ::tu::
------------------

Greg

IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.

PROUD MEMBER AAPK, NRA.
User avatar
RobesonsRme.com
Posts: 10129
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: Holley Mfg. Co., Lakeville, Conn.

Post by RobesonsRme.com »

Beautiful old jack. ::tu::

The shield reminds me of a sliding volume control on some electronic devises, as well as on computer screens for digital music and video apps.

Of course, such things didn't exist when the knife was made, so we probably shouldn't call it a "Slider Bar" shield.

Charlie Noyes
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
JAMESC41001
Posts: 951
Joined: Fri Nov 23, 2012 8:14 pm

Re: Holley Mfg. Co., Lakeville, Conn.

Post by JAMESC41001 »

Lots to like with that one John. I feel the same way about ebony jacks. Looking forward to seeing more pics.
doglegg
Gold Tier
Gold Tier
Posts: 23928
Joined: Mon Sep 18, 2017 2:35 am
Location: Grand Prairie, Texas

Re: Holley Mfg. Co., Lakeville, Conn.

Post by doglegg »

JohnR wrote:My kryptonite is large ebony jacks, they will be the death of my bank account. This 3 3/4" Holley popped up this morning, looks to be in high condition, full blades and that clip has an awesome swedge. Probably overpaid but this will be the first Holley in my collection and it looks to be a pretty nice one.
Will post pictures when it arrives.
JohnR, you "probably overpaid for this..." only if you're not pleased with it. And I think you are and should be. Such quality and condition is always satisfying. ::nod:: ::nod::
JohnR
Bronze Tier
Bronze Tier
Posts: 2118
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: Holley Mfg. Co., Lakeville, Conn.

Post by JohnR »

Thank you for everyone's comments. Knife showed up and it is a nice example, one of the better Holley's I have seen, been lightly cleaned without rounding edges, full blades, crisp tang stamps, main negative is a fine pin crack on the pile side which I knew about from pictures.

Unfortunately I can't take good pictures for awhile, been battling knee pain for awhile and las night It totally let loose, excruciating pain, had MRI today and talking to surgeon tomorrow, hope I don't miss the Rendezvous.

Best pic I can do right now with a cell phone.
Attachments
IMG_0467.jpg
Duffer
Posts: 1047
Joined: Sat Sep 19, 2015 9:33 pm
Location: Las Vegas, NV

Re: Holley Mfg. Co., Lakeville, Conn.

Post by Duffer »

John, that is pretty darn nice for a Holley! Hope everything with your knee works out favorably and you don’t experience to much pain and discomfort in the process ::nod::
Lloyd
User avatar
FRJ
Gold Tier
Gold Tier
Posts: 17136
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Holley Mfg. Co., Lakeville, Conn.

Post by FRJ »

John, I hope your knee gets healthy.

That is a fine looking Holley. ::nod::

Thanks for showing it here. ::tu::
Joe
JohnR
Bronze Tier
Bronze Tier
Posts: 2118
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: Holley Mfg. Co., Lakeville, Conn.

Post by JohnR »

Thanks guys, just got the radiology report and have a root torn meniscus and some floaters, should be fixable. Soon as I can will take pictures of the knife, it deserves it.
doglegg
Gold Tier
Gold Tier
Posts: 23928
Joined: Mon Sep 18, 2017 2:35 am
Location: Grand Prairie, Texas

Re: Holley Mfg. Co., Lakeville, Conn.

Post by doglegg »

JohnR, sorry for the bum knee. I understand, I have 2 new ones. Money well spent. Glad you have that Holley to handle until you feel better. ::handshake:: ::nod::
JohnR
Bronze Tier
Bronze Tier
Posts: 2118
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: Holley Mfg. Co., Lakeville, Conn.

Post by JohnR »

Was able to hobble around and take a few pics, for me the best part of this knife is the clip main with a swedge that goes almost tip tp tang, don't think I have another knife done this way in the collection. The shield is unique also. Blades are full, looks like had little use but has had rust cleaned off and does have pin crack on pile side.

Thanks for everyone's well wishes, had a positive doctors visit yesterday and may be able to avoid surgery, had a shot and start PT next week.
Attachments
IMG_0457.jpg
IMG_0458.jpg
IMG_0460.jpg
IMG_0455.jpg
IMG_0451.jpg
User avatar
peanut740
Gold Tier
Gold Tier
Posts: 8123
Joined: Fri Jan 23, 2009 2:32 pm
Location: Ohio, along the river
Contact:

Re: Holley Mfg. Co., Lakeville, Conn.

Post by peanut740 »

John ::tu::
Roger
User avatar
FRJ
Gold Tier
Gold Tier
Posts: 17136
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Holley Mfg. Co., Lakeville, Conn.

Post by FRJ »

Beautiful knife, John and nice pictures. Thank you.

That swedge just flows in that last picture. ::tu::
Joe
JohnR
Bronze Tier
Bronze Tier
Posts: 2118
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: Holley Mfg. Co., Lakeville, Conn.

Post by JohnR »

Thank you Joe and Roger, I got to experiment with lighting and exposure to get details like the swedge sharper and clearer.
User avatar
danno50
Gold Tier
Gold Tier
Posts: 3916
Joined: Mon Jan 12, 2009 12:05 am
Location: Saskatchewan, Canada

Re: Holley Mfg. Co., Lakeville, Conn.

Post by danno50 »

Very nice, John, and as Joe said, great pictures! ::tu::
Dan
JAMESC41001
Posts: 951
Joined: Fri Nov 23, 2012 8:14 pm

Re: Holley Mfg. Co., Lakeville, Conn.

Post by JAMESC41001 »

Good news John and great knife!
User avatar
LongBlade
Posts: 3417
Joined: Mon May 18, 2015 3:00 pm
Location: Woods of CT

Re: Holley Mfg. Co., Lakeville, Conn.

Post by LongBlade »

Nice Holley John ::tu:: ::tu:: ... Somehow I missed this or saw it on another thread and commented ::hmm:: and hope your knee is coming along healing!!!
____________________________________________________________________________
Lee
JohnR
Bronze Tier
Bronze Tier
Posts: 2118
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: Holley Mfg. Co., Lakeville, Conn.

Post by JohnR »

LongBlade wrote:Nice Holley John ::tu:: ::tu:: ... Somehow I missed this or saw it on another thread and commented ::hmm:: and hope your knee is coming along healing!!!
Thank you all for the nice comments. Lee, thought the knee was going to be ok but it could not handle one day back at work before pain and swelling started up again so I am now waiting on a date for Doc to scope it and see what's going on and what he can fix.
User avatar
gsmith7158
Gold Tier
Gold Tier
Posts: 8617
Joined: Fri Dec 25, 2015 7:25 pm
Location: Canton, Ga. 100% of the time
Contact:

Re: Holley Mfg. Co., Lakeville, Conn.

Post by gsmith7158 »

John I guess I haven't been paying attention lately. So sorry to hear about your mobility problems.Modern medicine does some amazing things these days so I hope you get fixed up pretty quick. All that stuff still hurts though. I wish you a speedy recovery. And what a great knife. At least knee problems haven't affected your Knife eye. ::tu::
------------------

Greg

IF YOU AIN'T BUYING OR LOOKING AT A KNIFE THEN YOU AIN'T LIVING.
Always looking to buy good quality Empire knives.

PROUD MEMBER AAPK, NRA.
User avatar
FRJ
Gold Tier
Gold Tier
Posts: 17136
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Holley Mfg. Co., Lakeville, Conn.

Post by FRJ »

Here's a little Holley Boys Knife I got in today.
It's in great condition as is its big brother that I am showing in comparison.

While these two were catching frogs their older, more sophisticated sibling was
catching trout on river.
Attachments
DSCN8708.JPG
DSCN8718.JPG
DSCN8730.JPG
DSCN8756.JPG
DSCN8762.JPG
Joe
JohnR
Bronze Tier
Bronze Tier
Posts: 2118
Joined: Sat Mar 14, 2015 11:43 am
Location: Maryland

Re: Holley Mfg. Co., Lakeville, Conn.

Post by JohnR »

Joe, very nice Holley's, love the boys knife with its bigger brother, quite a pair to have in a collection.
User avatar
royal0014
Silver Tier
Silver Tier
Posts: 7054
Joined: Sun Jun 17, 2012 8:21 pm
Location: ♥Sweet Home Alabama♥

Re: Holley Mfg. Co., Lakeville, Conn.

Post by royal0014 »

Wow! Beautiful Hollies .... ::tu::
Chris
i woke last night to the sound of thunder
how far off i sat and wondered
started humming a song from nineteen sixty two
aint it funny how the night moves
User avatar
FRJ
Gold Tier
Gold Tier
Posts: 17136
Joined: Fri May 14, 2010 1:43 pm
Location: Ct.

Re: Holley Mfg. Co., Lakeville, Conn.

Post by FRJ »

Thank you, guys. ::tu::
Joe
Post Reply

Return to “Knife Lore - Traditional Knives From the Old Days”