My latest Schrade

[JohnR]

JohnR, I like that little whittler. What are the handles, they look good.

Thank you all for the comments, doglegg they are bone, 804's have come in a variety of handle materials and colors over the years.

[doglegg]

This pair of Whittlers have nice bone scales. Ken

Very good pick up on those two. Love the scales. Beautiful.

[bladecollectorr]

This pair of Whittlers have nice bone scales. Ken

That whittler set has delrin scales not bone.

[cody6268]

I picked this one up Memorial Day weekend at an antique store. It is a new in the box 194OT with the shield from Asten, a company that made felts for the paper industry. According to what I found for online history, this company started about 1890 in Belgium and then later started a manufacturing plant in Philadelphia about 1931.

When you Google Asten mostly what you find are knives, primarily Schrade, that have the Asten name on the shield. Apparently like a lot of other companies that produced felts for the paper industry, they also gave away a lot of knives!
One of the unique things about the Delrin on this knife is that it is much darker in color than the Delrin on most Old Timers.

Pardon the lousy indoor pictures, the shield is really quite shiny and it makes it difficult to photograph.

Schrade 194OT Asten e.jpg

Schrade USA Asten a.jpg

Ah, that's what that shield goes to. I've seen several of them in lots of Schrade parts. Most of the Asten Felts knives I see are Folding Hunters; both Schrade and Kabar. I guess chosen because the large size made it good for cutting the dryer felts.

[dweb1897]

This pair of Whittlers have nice bone scales. Ken

I wouldn't bet on those being bone scales. They're the same as on the Schrade 206

I had Heman re-handle a set of those and mine sure weren't bone.

[treefarmer]

Doug, I will have to agree with you concerning the handles on Koldgold's fine whittlers. The handles are almost identical, mark for mark when you blow the picture up. The little darker lines look like veins just as the Barlow you showed. Schrade did a great job making them look so real.
And your new handles are beautiful! Much respect for Mr. Williams.
Treefarmer

[koldgold]

It is very hard to believe, Schrade made such a good fake bone for some of their knives. Ken.

[zoogirl]

I got this one out at the antique show today. As you can see, it’s a 834 Schrade Walden. I think the scales are bone but I wouldn’t swear it.
My new little friend kicked my Coast out of my purse as soon as we got home! determined little thing! Well, the Coast was a bit on the small side anyway. It seems I have a new EDC.
There are actually splits on the centre pin, both sides, but it feels pretty solid. I like it because it’s now the closest to my first, lost and lamented, knife.

[orvet]

Nice one Ann. That is the open stock forerunner of the 34OT ( Old Timer).
The pattern was actually a Schrade Cut Co pattern #8343 that was brought into Schrade Walden's line about 1947, at least that is the earliest I could find it listed in the Schrade Walden catalog.

[kootenay joe]

And i believe it has Derlin handles. They shoulda called it " Darlin' ". Like "i love my darlin' knife".
kj

[KnifeSlinger#81]

I got this one out at the antique show today. As you can see, it’s a 834 Schrade Walden. I think the scales are bone but I wouldn’t swear it.
My new little friend kicked my Coast out of my purse as soon as we got home! determined little thing! Well, the Coast was a bit on the small side anyway. It seems I have a new EDC.
There are actually splits on the centre pin, both sides, but it feels pretty solid. I like it because it’s now the closest to my first, lost and lamented, knife. 86A19621-B805-487B-9372-A0C6B8B87B2B.jpegA5851064-35C7-4C14-BE45-0EF3EDCB4609.jpeg49AFB995-09F4-4B78-8A47-74DD81B92E91.jpeg

A good find Ann. I think you will like how dandy that pattern really is, and the blades look to be nearly full. The handles are delrin so that would put it from the early 1960's to no later than 1973.

[doglegg]

Great find Ann. It should be carried. You have made it feel family.

[zoogirl]

Thank you, gentlemen!
Yes, I think it’s now the permanent purse knife. My 72 resides in my LFP and has no intention of moving out. Rightly so. So the next honourable spot is the purse. I think between ‘em, I’m pretty much covered...well, if you include the rather large douk-douk that hangs out in the back of the purse. I got it from Charlie C and it’s not going anywhere either!
I kind of jangle when I walk though...

[New_Windsor_NY]

Well my hawkbill wire handle pocket knife arrived today. I gave it a very gentle cleaning and I got quite an unexpected surprise.
First, here is the way the seller described the knife: "Schrade Wire Jack Knife Hawksbill Pocket Knife Vintage Rare Antique PAT 9-21-28. Condition is used, what you see is what you get. Thank you for stopping by and happy bidding, please check out my other items." The seller's pictures of the knife are in the "Specialty Forums", "Knife Lore" forum, "wirejacks" thread, page 6 and posted by me. After the cleaning, I discovered that there were etchings on each side of the blade. On one side it says, ATLAS BISON (over) BOARD PRODUCTS with a figure holding a board with a globe on top of it between the wording. The other side of the blade says CENTRAL FIBRE PRODUCTS CO. (over) INCORPORATED. Both are barely legible, but can be read with a magnifying glass. I did manage to get some of both to show up in the pictures. This makes a most welcome addition to my wire handle knives. BRIDGEPORT being spelled out on the tang stamp was a bonus also.
CLICK THE PICTURES TO ENLARGE.

[cody6268]

Great score! I've been looking for one to add to my hawkbill collection. It looks to be in really good shape. There was a run of them with copper-beryllium blades (to prevent sparking; as I believe these were made for an explosives company) that you might want to look out for. There were very, very few of those made.

It's a really interesting concept, with the handle being pretty much all the structural and mechanical parts; which makes me wonder why no one's doing anything exactly like it today?

[New_Windsor_NY]

Great score! I've been looking for one to add to my hawkbill collection. It looks to be in really good shape. There was a run of them with copper-beryllium blades (to prevent sparking; as I believe these were made for an explosives company) that you might want to look out for. There were very, very few of those made.

It's a really interesting concept, with the handle being pretty much all the structural and mechanical parts; which makes me wonder why no one's doing anything exactly like it today?

I'm always looking for ANY wire handled knife (not so much the scout mess kit knives) and now you have given me another variation to hunt down. Thank you, I think.

[doglegg]

N W NY, you got a cool one there. Etch is a bonus. Excellent.

[Meridian_Mike]

I got this guy yesterday....
It is an Old Timer shield Master Mechanic (MM108)... same knife as the 108 OT.
I did a little research yesterday on the Master Mechanic knives.... It seems that Camillus made some of the Master Mechanic knives too.
My collecting interest (right now....LOL) is the MM knives with the Old Timer shields. Do y'all have any insight on the Schrade vs Camillus MM knives?
Who made the MM knives with the Master Mechanic shield? (both maybe? )

Mike

I now have the MM89 and the MM108 with an Old Timer shield.....
(I'm sure there are others....LOL)

[KnifeSlinger#81]

I got this guy yesterday....
It is an Old Timer shield Master Mechanic (MM108)... same knife as the 108 OT.
I did a little research yesterday on the Master Mechanic knives.... It seems that Camillus made some of the Master Mechanic knives too.
My collecting interest (right now....LOL) is the MM knives with the Old Timer shields. Do y'all have any insight on the Schrade vs Camillus MM knives?
Who made the MM knives with the Master Mechanic shield? (both maybe? )

MM108 Master Mechanic.jpg

Mike

I now have the MM89 and the MM108 with an Old Timer shield.....
(I'm sure there are others....LOL)

There is an MM3, shown here with its schrade stamped variant.

[Meridian_Mike]

Thanks Paul....

I read somewhere that a fellow said he had a MM8 and a MM34 with an Old Timer shield.
(I am sure there were others...)
Like unto this guy.....

I also saw where there was an ad that showed SEVERAL Schrade marked knives with the Old Timer shield and all they had was the Master Mechanic blade etch.
Like unto this guy....

Then.... of course there are several shown with the Master Mechanic shield and a MM# on the blade. The MM# marked blade tangs only have "USA" on them under the MM#....
Like this here.....

Bad example.... this one also shows "stainless" but you get the point.....

Seem like that is the bunch I read were made by Schrade and Camillus....
(maybe you know....)


(I think)

[tongueriver]

I have been looking for one of these for several years. I have another one that is not completely original but ok, I guess until I found this minty perfect one. It is a transition 49r knife in the new 497 pattern, introduced in the transition year 1973. For a few hours or days, but probably not weeks, these came out with the old Schrade Walden 147 tang stamp. I love the pattern and this one just tickles me.

[ea42]

Cal that's an amazing find, I think they're harder to come by than a 2OT! Congrats!!!

Eric

[dweb1897]

Don't forget the MM152 over U.S.A. tang stamp with OLD TIMER shield

[KnifeSlinger#81]

I have been looking for one of these for several years. I have another one that is not completely original but ok, I guess until I found this minty perfect one. It is a transition 49r knife in the new 497 pattern, introduced in the transition year 1973. For a few hours or days, but probably not weeks, these came out with the old Schrade Walden 147 tang stamp. I love the pattern and this one just tickles me.trans1.jpgtrans4.jpgtrans5.jpgtrans6.jpg

Not a bad looking knife Cal.

[black mamba]

Big congrats, Cal, that's a gem!