Old Hawkbills
- peterforce
- Posts: 918
- Joined: Sun Mar 02, 2008 6:33 am
- Location: pa/nj
Re: Old Hawkbills
here is one from southington over 100yrs old. just got it today from aapk member trade!!! trading is the best
anyway this is before i clean it up..if i do. it snaps harder then any other hawkbill i have ever owned or held.definetly take a finger or two. no liner locks on these puppies.
do the handles looked replaced? i would think they would have been being this old.
anyway this is before i clean it up..if i do. it snaps harder then any other hawkbill i have ever owned or held.definetly take a finger or two. no liner locks on these puppies.
do the handles looked replaced? i would think they would have been being this old.
- muskrat man
- Gold Tier

- Posts: 5684
- Joined: Fri Jun 30, 2006 4:04 am
- Location: Ohio
- Contact:
Re: Old Hawkbills
nice one pete, handles look right to me. Just cause a knife is old don't mean it's been fooled with
Thanks very much S-K Here are some better pics.
Thanks very much S-K Here are some better pics.
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
- upnorth
- Posts: 2959
- Joined: Sun Oct 15, 2006 8:43 pm
- Location: Vancouver, Canada
Re: Old Hawkbills
Kaleb, that's a nice one! Great find
!
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!
Johnnie Fain would have approved!
1949 - 2009
Johnnie Fain would have approved!
1949 - 2009
- muskrat man
- Gold Tier

- Posts: 5684
- Joined: Fri Jun 30, 2006 4:04 am
- Location: Ohio
- Contact:
Re: Old Hawkbills
Well I am getting closer to my holy grail, slowly but surely. I managed to land a J. Russell hawkbill today with bear trap snap, truely a piece of work. very full blade. Also ran across this venter H.M Slater hawkbill too from sheffield.
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
- upnorth
- Posts: 2959
- Joined: Sun Oct 15, 2006 8:43 pm
- Location: Vancouver, Canada
Re: Old Hawkbills
Impressive Russell, Kaleb! Very full blade.
Utopia!! A chicken in every pot!! And a Barlow in every pocket!!!
Johnnie Fain would have approved!
1949 - 2009
Johnnie Fain would have approved!
1949 - 2009
- peterforce
- Posts: 918
- Joined: Sun Mar 02, 2008 6:33 am
- Location: pa/nj
Re: Old Hawkbills
one thing im learning about hawks,it seems the older the better.also the older the easier to chomp a finger off.
- muskrat man
- Gold Tier

- Posts: 5684
- Joined: Fri Jun 30, 2006 4:04 am
- Location: Ohio
- Contact:
Re: Old Hawkbills
here is a pretty scarce one KA-BAR with Union Cut Co. Back tang with bone handles.
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
- smiling-knife
- Posts: 3365
- Joined: Mon Feb 13, 2006 8:39 pm
- Location: Bedford, UK
- muskrat man
- Gold Tier

- Posts: 5684
- Joined: Fri Jun 30, 2006 4:04 am
- Location: Ohio
- Contact:
Re: Old Hawkbills
thanks very much steve, I like a bone handled hawkbill 
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
- singin46
- Posts: 8126
- Joined: Thu Feb 08, 2007 6:57 am
- Location: MUSIC CITY
Re: Old Hawkbills
Great find Kaleb, my first time to see one too.
Diggin on that for sure man!
Perry
Diggin on that for sure man!
Perry
Love all Jacks
- smiling-knife
- Posts: 3365
- Joined: Mon Feb 13, 2006 8:39 pm
- Location: Bedford, UK
Re: Old Hawkbills
Just reviewing this great thread.
This Wostenholm is circa 1930s.
s-k


Rust Never Sleeps
- Miller Bro's
- Gold Tier

- Posts: 13631
- Joined: Mon Feb 16, 2009 11:22 pm
- Location: Earth
Re: Old Hawkbills
Just found this thread, some nice knives shown here.
Here is one that I have.
Marked J. Nowill & Son`s Sheffield, Pre 1890 manufacture, rat tail bolsters, tapered backspring, rosewood handles, blade face stamped "Greenwich Inlaid".
The condition is like new, except for a few scratches on the blade, never cleaned or polished!
M.B.
Here is one that I have.
Marked J. Nowill & Son`s Sheffield, Pre 1890 manufacture, rat tail bolsters, tapered backspring, rosewood handles, blade face stamped "Greenwich Inlaid".
The condition is like new, except for a few scratches on the blade, never cleaned or polished!
M.B.
- Attachments
-
- 11.JPG (53.61 KiB) Viewed 3521 times
AAPK Janitor
369
369
- thegreedygulo
- Gold Tier

- Posts: 710
- Joined: Tue Jul 19, 2011 4:09 pm
Re: Old Hawkbills
1. H. Boker & Co's Improved Cutlery Hawkbill (circa 1869 - 1914).
2. Boker Hawkbill with a birdseye top rivet. Tang stamp is an x that has an arrow through it with the letters M & R below the arrow and then Boker at the bottom (circa 1850 - 1875).
2. Boker Hawkbill with a birdseye top rivet. Tang stamp is an x that has an arrow through it with the letters M & R below the arrow and then Boker at the bottom (circa 1850 - 1875).
A pocket knife is still an intimate personal possession of the individual who carries it and consequently deserves the best of materials, finish and workmanship in its production. (Quoted from Boker's 1928 cutlery catalog).
- orvet
- Gold Tier

- Posts: 19898
- Joined: Tue May 16, 2006 6:23 am
- Location: Willamette Valley, Oregon
Re: Old Hawkbills
That bottom hawkbill is SWEET!!!
Goins’ guesstimates the date on that tang stamp as 1850-1875!
In pretty good condition for a 135+ year old knife!
Goins’ guesstimates the date on that tang stamp as 1850-1875!
In pretty good condition for a 135+ year old knife!
Dale
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
AAPK Administrator
Please visit my AAPK store: www.allaboutpocketknives.com/orvet
Job 13:15
"Buy more ammo!" - Johnnie Fain
“Evil is Powerless If The Good are Unafraid.” – Ronald Reagan
-
gino
- Posts: 8371
- Joined: Sun Feb 28, 2010 3:50 pm
- Location: Pa
- Contact:
Re: Old Hawkbills
Awesome looking knives! The old bills can actually be a pretty beautiful knife! 
-( life is too short to carry a cheap knife )-
-
floydpots
- Posts: 6
- Joined: Tue Mar 19, 2024 8:18 pm
- Location: OHIO
- Contact:
Re: Old Hawkbills
WOW! I love the contouring on these two.
Just gorgeous!
Just gorgeous!
- Mumbleypeg
- Gold Tier

- Posts: 15692
- Joined: Fri Apr 18, 2014 1:28 am
- Location: Republic of Texas
Re: Old Hawkbills
Welcome to AAPK! Glad to see you’re mining the archival posts here (The post you responded to is nearly 13 years old.). Lots of great info here, makes for some great reading and learning.
Ken
Member AKTI, TSRA, NRA.
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
If your religion requires that you hate someone, you need a new religion.
When the people fear their government, that is tyranny. When government fears the people, that is freedom.
https://www.akti.org/
- edgy46
- Posts: 3314
- Joined: Sun Mar 04, 2007 2:40 am
- Location: S. W. Ohio
- 1967redrider
- Gold Tier

- Posts: 21478
- Joined: Wed Feb 02, 2011 4:23 pm
- Location: Alexandria, VA
- Contact:
Re: Old Hawkbills
An oldie but a goodie.
to AAPK! All but the last 6 posts are older than my AAPK membership.
John
John
Pocket, fixed, machete, axe, it's all good!
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
CHRIST IS KING
You're going to look awfully silly with that knife sticking out of your @#$. -Clint Eastwood, High Plains Drifter
CHRIST IS KING
- galvanic1882
- Gold Tier

- Posts: 3532
- Joined: Tue Jun 28, 2005 10:39 am
- Location: Payson AZ
- FRJ
- Gold Tier

- Posts: 17133
- Joined: Fri May 14, 2010 1:43 pm
- Location: Ct.
- FRJ
- Gold Tier

- Posts: 17133
- Joined: Fri May 14, 2010 1:43 pm
- Location: Ct.
- Ridgegrass
- Gold Tier

- Posts: 8124
- Joined: Sun Aug 30, 2020 2:04 pm
- Location: Ocean City, MD
- Contact:
Re: Old Hawkbills
Gotta stick my 3 cents worth in a "Hawkbill" thread. They are my favorite pattern. Here are 48 on display in the cave. I used to EDC one but they are a bit bulky in the pocket, but IMHO, they are the most useful of all blades. J.O'.
- Ridgegrass
- Gold Tier

- Posts: 8124
- Joined: Sun Aug 30, 2020 2:04 pm
- Location: Ocean City, MD
- Contact:
Re: Old Hawkbills
FRJ: I have a Maher & Grosh that is very similar to your Walden.Maybe Walden was the jobber? They are built like tanks and hold a razor edge.
J.O.
-
doglegg
- Gold Tier

- Posts: 23913
- Joined: Mon Sep 18, 2017 2:35 am
- Location: Grand Prairie, Texas
Re: Old Hawkbills
Great display.Ridgegrass wrote: ↑Thu Mar 21, 2024 10:47 pm Gotta stick my 3 cents worth in a "Hawkbill" thread. They are my favorite pattern. Here are 48 on display in the cave. I used to EDC one but they are a bit bulky in the pocket, but IMHO, they are the most useful of all blades. J.O'.