Mail Call !-Post your new pick-ups here............

TwoFlowersLuggage · Post by **TwoFlowersLuggage** » Tue Apr 03, 2018 1:19 am

I really like the combination of black G10 with the stainless in an almost, but not quite, traditional pattern. The mixture of old & new is a very cool.

TwoFlowersLuggage · Post by **TwoFlowersLuggage** » Tue Apr 03, 2018 3:49 am

Hey look - I *can* actually buy a knife that is bigger than a Peanut! To be honest, I had no idea how big a Camillus #8 is - it's a serious handful. This one is FAR from mint - the blade etch is completely gone and it has plenty of honest use dings and scrapes. It is also dull as a butter knife, so I'll need to give it some love.

Railsplitter · Post by **Railsplitter** » Tue Apr 03, 2018 8:52 am

Thanks for the compliments Scott and TFL. I appreciate it. It certainly is a beast.

doglegg · Post by **doglegg** » Tue Apr 03, 2018 2:07 pm

TwoFlowersLuggage wrote:Hey look - I *can* actually buy a knife that is bigger than a Peanut! To be honest, I had no idea how big a Camillus #8 is - it's a serious handful. This one is FAR from mint - the blade etch is completely gone and it has plenty of honest use dings and scrapes. It is also dull as a butter knife, so I'll need to give it some love.

MVIMG_20180402_203636.jpg
MVIMG_20180402_203748.jpg
MVIMG_20180402_203756.jpg

Like the first scratch on a new car the knives with just a little wear carry better. Like them both.

doglegg · Post by **doglegg** » Wed Apr 04, 2018 6:43 pm

Mail man brought me this little McGrew Ark. Barlow. Made for McGrew Pawn Shop of Glenwood Ark. probably by Camillus.

Quick Steel · Post by **Quick Steel** » Wed Apr 04, 2018 7:00 pm

An interesting and good looking Barlow. Also jnteresting is the page on which you displayed the knife. I refer to the commentary on properly storing a strop. I never considered this before. Since I hang my strop vertically in a clean (relatively) environment I don't feel the need to store it. However if it was in a work room or garage I can see the relevance. Learning something new every day.

doglegg · Post by **doglegg** » Wed Apr 04, 2018 7:09 pm

Quick Steel wrote:An interesting and good looking Barlow. Also jnteresting is the page on which you displayed the knife. I refer to the commentary on properly storing a strop. I never considered this before. Since I hang my strop vertically in a clean (relatively) environment I don't feel the need to store it. However if it was in a work room or garage I can see the relevance. Learning something new every day.

Thanks Quick Steel, I bought a whittling knife and a strop from Deepwoods Ventures and that is the instruction sheet that came with it. He makes great knives with absolutely beautiful hardwood burl handles.

TwoFlowersLuggage · Post by **TwoFlowersLuggage** » Wed Apr 04, 2018 9:17 pm

It's here!!!

As soon as I pulled this Robeson out of the package it immediately became one of my favorites. According to Charlie, this delrin (Ooops! Jerry correctly pointed out this can't be Delrin in the late 1930s - but it is some sort of synthetic) handled, slant-bolstered jack is probably the later end of the 1917-1939 tang stamp. Now I understand the fascination with Robeson knives - this knife is very well made. The seller even included the little pimp-red cloth bag, and the knife was freshly oiled!

woodwalker · Post by **woodwalker** » Wed Apr 04, 2018 10:39 pm

TwoFlowersLuggage wrote:It's here!!! As soon as I pulled this Robeson out of the package it immediately became one of my favorites. According to Charlie, this delrin handled, slant-bolstered jack is probably the later end of the 1917-1939 tang stamp. Now I understand the fascination with Robeson knives - this knife is very well made. The seller even included the little pimp-red cloth bag, and the knife was freshly oiled!

IMG_20180404_140541.jpg
IMG_20180404_140555.jpg

Nice one TFL!! Congratts!! Enjoy.

bdev · Post by **bdev** » Thu Apr 05, 2018 12:42 am

TwoFlowersLuggage wrote:It's here!!! As soon as I pulled this Robeson out of the package it immediately became one of my favorites. According to Charlie, this delrin (Ooops! Jerry correctly pointed out this can't be Delrin in the late 1930s - but it is some sort of synthetic) handled, slant-bolstered jack is probably the later end of the 1917-1939 tang stamp. Now I understand the fascination with Robeson knives - this knife is very well made. The seller even included the little pimp-red cloth bag, and the knife was freshly oiled!

IMG_20180404_140541.jpg
IMG_20180404_140555.jpg

Fine looking knife and I like the slanted bolsters. What size is it?

TwoFlowersLuggage · Post by **TwoFlowersLuggage** » Thu Apr 05, 2018 12:46 am

bdev wrote:
Fine looking knife and I like the slanted bolsters. What size is it?

I measure 3.25" closed. Same size as my Ka-Bar 1081.

jerryd6818 · Post by **jerryd6818** » Thu Apr 05, 2018 1:51 am

I really like those medium jacks. That's a good one Suitcase. Can we see a shot of your Ka-Bar 1081?

doglegg · Post by **doglegg** » Thu Apr 05, 2018 3:11 am

TwoFlowersLuggage wrote:It's here!!! As soon as I pulled this Robeson out of the package it immediately became one of my favorites. According to Charlie, this delrin (Ooops! Jerry correctly pointed out this can't be Delrin in the late 1930s - but it is some sort of synthetic) handled, slant-bolstered jack is probably the later end of the 1917-1939 tang stamp. Now I understand the fascination with Robeson knives - this knife is very well made. The seller even included the little pimp-red cloth bag, and the knife was freshly oiled!

IMG_20180404_140541.jpg
IMG_20180404_140555.jpg

You seem a little excited about that one and I can see why. Congrats.

TwoFlowersLuggage · Post by **TwoFlowersLuggage** » Thu Apr 05, 2018 4:05 am

Here ya go Jerry, the Ka-Bar 1081 next to the Robeson 623480.

Doglegg: Yes! This is my first Robeson knife and I really like it. And trust me, today, I really, REALLY needed something to be excited about. It's only Wednesday and it has already been a looooong week!

jerryd6818 · Post by **jerryd6818** » Thu Apr 05, 2018 11:57 am

Thanks Suitcase. I know little to nothing about Ka-Bar folders and not a hair of a lot more about their fixed blades.

Just Plain Dave · Post by **Just Plain Dave** » Thu Apr 05, 2018 3:46 pm

Got these from Scott today.
1040T and Schrade Walden 219 jack.

doglegg · Post by **doglegg** » Thu Apr 05, 2018 4:14 pm

Very nice JPD, The Schrade Walden really pleases my eye.

jmh58 · Post by **jmh58** » Thu Apr 05, 2018 6:32 pm

Suitcase (That's funny) real nice jack!!
JPD.. Real nice toters Scott hooked ya up with!!!

John

TripleF · Post by **TripleF** » Thu Apr 05, 2018 9:44 pm

Fresh offf the USPS truck today....

MT-Vessel · Post by **MT-Vessel** » Thu Apr 05, 2018 11:10 pm

One down, two to go.

PS
TripleF,
If you would like to redirect your mail to me, I’d be OK with it.

garddogg56 · Post by **garddogg56** » Thu Apr 05, 2018 11:43 pm

Thats a great pair JPD..Nice pile Scott

bdev · Post by **bdev** » Fri Apr 06, 2018 12:00 am

I usually don't buy knives made in China but this one caught my eye. It's quite a knife for 16 bucks.
Measures 3 9/16". I don't understand why they don't make these knives with regular curved nail nicks instead of match strike nicks. They'd look a lot better. I think the match strike nick looks good on the long pull but not on the curved. Just my opinion.

Brumbydownunder · Post by **Brumbydownunder** » Fri Apr 06, 2018 3:48 am

bdev wrote:I usually don't buy knives made in China but this one caught my eye. It's quite a knife for 16 bucks.
Measures 3 9/16". I don't understand why they don't make these knives with regular curved nail nicks instead of match strike nicks. They'd look a lot better. I think the match strike nick looks good on the long pull but not on the curved. Just my opinion.

Marbles.JPG

I'm with you ... the knife looks well made & handsome except for that Curved "striker' nail nick. It just my head in for some reason.

Derek

TripleF · Post by **TripleF** » Fri Apr 06, 2018 7:30 pm

Found the Kabar at the estate sale......
The rest came in the mail today....

FRJ · Post by **FRJ** » Fri Apr 06, 2018 8:09 pm

Here's an old Richards and Conover Hardware.
Please put one hand over your good eye so as not to ogle the blade too close. Thank you. 4 1/2".

All About Pocket Knives

Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............