34OT in Monkeypod

glennbad · Post by **glennbad** » Fri Dec 22, 2017 1:25 pm

I was working on this one for a friend. He spent some time in Hawaii many years ago, and had got some MonkeyPod from a tree that was being cut down. He had it all these years, and at some point had it made into bookends. We had talked a few years back about doing a knife with the wood, and this year he wanted to do one for his son. I chose a pre-2004 34OT, as it's a nice smallish stockman that works for most tasks. He gave me the bookends, and I cut some down to use as covers. I threw in a different shield.

Here's the finished product...

I did not use any CA or other wood finishes. It does a decent job finishing with standard buffing compounds.

treefarmer · Post by **treefarmer** » Fri Dec 22, 2017 1:38 pm

Glenn, That's a looker there! Congratulations on another great job. Going to have to google, "monkeypod tree".
Treefarmer

jerryd6818 · Post by **jerryd6818** » Fri Dec 22, 2017 1:43 pm

Another one to slobber over. That's really nice and a great job as always. I love the consistency of your work.

Railsplitter · Post by **Railsplitter** » Fri Dec 22, 2017 1:43 pm

Nice work, Glenn! Looks like a completely different knife.

QTCut5 · Post by **QTCut5** » Fri Dec 22, 2017 2:02 pm

That's amazing. I have a new-found respect for the monkeypod trees in my yard. To be sure, they're nice big shade trees but very messy (constantly dropping leaves & seedpods). Had no idea they have "hearts of gold" such as your work revealed. Beautiful. Pure magic.

~Q~

LanG · Post by **LanG** » Fri Dec 22, 2017 2:04 pm

Beautiful knife and instant family heirloom. Great work!

XX Case XX · Post by **XX Case XX** » Fri Dec 22, 2017 2:50 pm

glennbad wrote: He gave me the bookends, and I cut some down to use as covers.

Fantastic looking knife Glenn. I would expect no less from you. You are definitely one of the "Elite". Glenn, I'm not sure if I'm seeing this right so I'm going to provide a few photos for comparison.

On one of your photos, there appears to be "ridges and valleys" in the wood. Probably just looks that way. Compare the first photo of the OP knife, and then the second photo of a Case Stag 32 I own. The portion I circled on each photo looks nearly the same. Just an illusion?

That wood has a weird name but it sure is beautiful.

Click on the photos to get a better look. It's hard to see unless you increase the size of the pictures.

_____________
Mike

glennbad · Post by **glennbad** » Fri Dec 22, 2017 6:39 pm

Thanks for the comments, Mike. I guess the pictures are misleading. The wood finished for the most part "smooth". It did have some deep grain, if you look below the shield, there is some grain there, that could be filled, but I left it open for character

Chase · Post by **Chase** » Fri Dec 22, 2017 6:43 pm

Gorgeous workmanship right there! Superb job Glenn

Tom

royal0014 · Post by **royal0014** » Fri Dec 22, 2017 6:46 pm

Beautiful work as always Glen.
Interestin' wood . . . .

OLDE CUTLER · Post by **OLDE CUTLER** » Fri Dec 22, 2017 11:15 pm

That 34 OT is nothin' but nice! Have not seen monkeypod wood on a knife before, looks great!

philco · Post by **philco** » Sat Dec 23, 2017 1:43 am

Never heard of monkeypod but it sure makes some fine handles. As usual Glenn, you have done super work.

orvet · Post by **orvet** » Sat Dec 23, 2017 3:29 pm

I have seen monkey pods for sale at the warehouse where I buy most of my exotic hardwoods but I never knew they look that good when you cut them up for wood.

Stellar job as usual! Outstanding work once again Glenn!

jerryd6818 · Post by **jerryd6818** » Sat Dec 23, 2017 4:05 pm

I may have misread that Dale but I believe he used the wood from the tree, not from the pod (fruit?). Just did a Google search and Monkey Pod wood is EXPENSIVE!!!!!

jerryd6818 · Post by **jerryd6818** » Sat Dec 23, 2017 4:10 pm

Don't know why I am unable to edit my posts or even quote posts but the above works out to a skosh over $60 per bd/ft.

orvet · Post by **orvet** » Sat Dec 23, 2017 4:18 pm

Jerry, you are not the only one having trouble editing posts, I am having an issue with it also. I didn’t realize other people were having the same problem I thought my issue was tied to my status as an administrator. I will advise Bryan you’re having difficulty with editing posts also.

Is anyone else having trouble editing their post?

jerryd6818 · Post by **jerryd6818** » Sat Dec 23, 2017 4:22 pm

I sent a PM to him describing the glitch. Just tried logging out and logging back in. No change.

jerryd6818 · Post by **jerryd6818** » Sat Dec 23, 2017 4:27 pm

PM I sent to Bryan:

Hate to complicate your life but lately I've been unable to use the buttons on a post (except for the first post on a page) to quote, edit my posts, report a post or quote a post. Seems to work fine for the first post on each page but not subsequent posts. It doesn't seem to be forum or thread sensitive.

Quick Steel · Post by **Quick Steel** » Sun Dec 24, 2017 2:26 am

Yesterday I could not erase [delete] an accidental double post.

orvet · Post by **orvet** » Sun Dec 24, 2017 7:42 am

Quick Steel wrote:Yesterday I could not erase [delete] an accidental double post.

Even as an administrator I was having the same problems. Normally I can pretty much access anything but I couldn't even access my own post yesterday. Bryan got it fixed and I think we're all good now.
Is anyone still having that problem?

All About Pocket Knives

34OT in Monkeypod

34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod

Re: 34OT in Monkeypod