KNIFE FINDS OF THE DAY

[tjmurphy]

Is it still a bomb if it's off-line?

[Tsar Bomba]

This one was a flyer. It's not really a "find of the day" today so much as a rediscovery. Since I have no Camillus 21s, I decided to pick this pre-1976 version up on the cheap. When I got it, both blades had terrible and gritty action and the mark side Delrin was hazed so flat-white and so thick in the jigging that I was convinced it was either stained/painted and then left as-is or possibly even plastered accidentally. I opened up the blades and stuck it in a mineral oil bath for a week, took a soft brush to it and the Delrin haze was gone. I was encouraged by the progress on the blade pivots, but ultimately I stuck it back in the tin where it was bathing.

Fast forward to a month later and I remember why I've got this tin sitting on my table. Pull out the knife and wipe it down - both blades open and close with snap like a dream, there is zero grit in the action, and the Delrin is likely in its best condition since leaving the factory (it's probably older than me yet I can't make the same boast ). With that sweet Camillus carbon steel, I think this one's going into the EDC rotation for some showin' off time.

The master clip is a little strange to me. The mark side has a sabre grind but the pile side is flat-ground. I thought it was curious...

I kinda wish I'd taken "before" photos but frankly I didn't have the highest hopes for the knife at first... Delighted with how it turned out.

[jerryd6818]

T.J. --- As far as I'm concerned it is but I'm not in control of definitions so take that for whatever it is.

Tony --- Congratulations on doing the right thing even though it may have been inadvertent. Isn't it sweet to raise a knife from the dead and turn it into something great? As far as the saber grind on the mark side, I've never noticed on other Camillus knives like the 14 & 18 (both Jacks like the 21) but I can tell you the 72 started life with saber grind on both sides, shortly after shifted to saber grind on the mark side only and eventually both sides were flat ground. The 29 and 35 had saber grind on the mark side for some period of time. My little 21 is a post 1990 made for SMKW (Ole Smoky etched on the blade) and is flat ground on both sides so now you've gone and done it. You've bombed me with the desire for a 21 with the saber grind on the master blade. Thanks a lot.

[Tsar Bomba]

My little 21 is a post 1990 made for SMKW (Ole Smoky etched on the blade) and is flat ground on both sides so now you've gone and done it. You've bombed me with the desire for a 21 with the saber grind on the master blade. Thanks a lot.

I'll gladly accept the blame for enabling your addiction even further. I think you've caused me to want a 72 with the mark-side sabre grind now, so right back atcha!

[koldgold]

Do not take any notes of Jerry's
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
It cost me money, and made me drift away from Schrade knives, looking for Camillus 72 knives. Ken

[jerryd6818]

Now wait a minute. Things are not as they seem. I can accept the blame laid by Tony for the saber ground 72 yearning. We have a kind of quid pro quo thing going there.

BUT

Ken! How am I to blame for something T.J. said? Hmm? Hmm? You done got the wrong shoe on the wrong foot with that one.

[edge213]

Colonel Coon Barlow

Queen Cutlery Co #06

[bighomer]

Beautiful knives fellers , great finds. David, That coon and lady is the cats me-ow

[tendots]

Now wait a minute. Things are not as they seem. I can accept the blame laid by Tony for the saber ground 72 yearning. We have a kind of quid pro quo thing going there.

BUT

Ken! How am I to blame for something T.J. said? Hmm? Hmm? You done got the wrong shoe on the wrong foot with that one.

Sorry Jerry,I was barking up the wrong tree the other day.TJ,could have known,that sneaky old coot,while half the knifecommunity is cravin for those 72,he heaves one after another roger bone gem out of the bay.And by the lack of competition gets them for a song.I wonder if there is German blood in his veins,they are known for their schemes.

[tjmurphy]

Now wait a minute. Things are not as they seem. I can accept the blame laid by Tony for the saber ground 72 yearning. We have a kind of quid pro quo thing going there.

BUT

Ken! How am I to blame for something T.J. said? Hmm? Hmm? You done got the wrong shoe on the wrong foot with that one.

Sorry Jerry,I was barking up the wrong tree the other day.TJ,could have known,that sneaky old coot,while half the knifecommunity is cravin for those 72,he heaves one after another roger bone gem out of the bay.And by the lack of competition gets them for a song.I wonder if there is German blood in his veins,they are known for their schemes.

As a matter of fact, three sides of my family are German, Straus, Brausch and Haupt/Houpt/Houp. As far as the quote "the 72................" ya got to blame Jerry for holding on to it and memorializing it.

HERE SNIPE, HERE SNIPE-SNIPE-SNIPE!! HEY THERE'S ONE OVER THERE!! YOU HOLD THE BAG AND I'LL RUN IT TO YA!!

[gsmith7158]

Now wait a minute. Things are not as they seem. I can accept the blame laid by Tony for the saber ground 72 yearning. We have a kind of quid pro quo thing going there.

BUT

Ken! How am I to blame for something T.J. said? Hmm? Hmm? You done got the wrong shoe on the wrong foot with that one.

Sorry Jerry,I was barking up the wrong tree the other day.TJ,could have known,that sneaky old coot,while half the knifecommunity is cravin for those 72,he heaves one after another roger bone gem out of the bay.And by the lack of competition gets them for a song.I wonder if there is German blood in his veins,they are known for their schemes.

As a matter of fact, three sides of my family are German, Straus, Brausch and Haupt/Houpt/Houp. As far as the quote "the 72................" ya got to blame Jerry for holding on to it and memorializing it.

HERE SNIPE, HERE SNIPE-SNIPE-SNIPE!! HEY THERE'S ONE OVER THERE!! YOU HOLD THE BAG AND I'LL RUN IT TO YA!!

TJ thanks for abstaining and running this one my way. I got her in the bag and I am eyeing some red abalone for her transformation!

[carrmillus]

.......those just don't look right unless they've got rogers bone on 'em, greg!!!.......... ..............

[gsmith7158]

.......those just don't look right unless they've got rogers bone on 'em, greg!!!.......... ..............

Well Tommy, send me a couple of slabs and we'll fix her up right!

[carrmillus]

.......those just don't look right unless they've got rogers bone on 'em, greg!!!.......... ..............

Well Tommy, send me a couple of slabs and we'll fix her up right!

........greg, that stuff is as scarce as hen's teeth!!!!................... ...................

[gsmith7158]

.......those just don't look right unless they've got rogers bone on 'em, greg!!!.......... ..............

Well Tommy, send me a couple of slabs and we'll fix her up right!

........greg, that stuff is as scarce as hen's teeth!!!!................... ...................

I hear ya buddy. That one Dimitri posted the other day is the only real one I have ever seen.

[carrmillus]

Well Tommy, send me a couple of slabs and we'll fix her up right!

........greg, that stuff is as scarce as hen's teeth!!!!................... ...................

I hear ya buddy. That one Dimitri posted the other day is the only real one I have ever seen.

........I've got three(1st gen.), greg, but they aren't in real good shape. the bone is good on them, but they all have a lot of wear on the blades!!........ ................

[gsmith7158]

........greg, that stuff is as scarce as hen's teeth!!!!................... ...................

I hear ya buddy. That one Dimitri posted the other day is the only real one I have ever seen.

........I've got three(1st gen.), greg, but they aren't in real good shape. the bone is good on them, but they all have a lot of wear on the blades!!........ ................

That makes my fourth one Tommy. It's got the best seconary blades of any of them.

[jerryd6818]

You guys are hoarding them.

[carrmillus]

I hear ya buddy. That one Dimitri posted the other day is the only real one I have ever seen.

........I've got three(1st gen.), greg, but they aren't in real good shape. the bone is good on them, but they all have a lot of wear on the blades!!........ ................

That makes my fourth one Tommy. It's got the best seconary blades of any of them.

.......greg, my favorites are the old Camillus split-back whittlers with both secondaries on the same end(like my grandpa used to whittle with), I've got 4 of those and they're my favorite whittlers!!!, sure wish I had my grandpa's!!!!!....... ...................

[gsmith7158]

You guys are hoarding them.

Jerryd I thought that's what we were supposed to do?

[carrmillus]

.....greg, I forgot about the equal-end splitback Camillus you sent me,it's the same blade configuration as a whittler, I guess it would be classed as a whittler, too!!!!.............(is this a sign that I have too many knives????)...... ........

[gsmith7158]

.....greg, I forgot about the equal-end splitback Camillus you sent me,it's the same blade configuration as a whittler, I guess it would be classed as a whittler, too!!!!.............(is this a sign that I have too many knives????)...... ........

Nah Tommy, that's not possible is it?

[ScoutKnives]

I have this first gen 72 in decent shape if someone wants to make me an offer , not sure what their going for ?
Mike

[carrmillus]

I have this first gen 72 in decent shape if someone wants to make me an offer , not sure what their going for ?
Mike

....that one has the coping blade paired with the master, so it's a second gen. it's a great looking knife, though!!..... ...................

[ScoutKnives]

Oh , ok thanks , is it more common then ?