Mail Call !-Post your new pick-ups here............

[KnifeSlinger#81]

I would leave that buffed edge alone. I got a Walden 885 just like yours a couple of weeks ago and it has that buffed edge. IMO, that adds to the authenticity.

What serial# is it? That can kinda tell ya the year it was made.

The serial is 22348.

[bighomer]

My gracious yawl are absolutely killing it in '17 fellers. My hat is off to you. ×10

[zp4ja]

These showed up today. Light is really bad for photography right now.... I'll get some better shots when the light returns.

The notable ones are:
Case XX Copperhead 6249
Case 10 Dot 5347
Roberson Shuredge Trapper 622382 in Strawberry

The other two are a '94 CCC 5355 Wharncliffe Whittler and a recent Jumbo Stock 6375 CV.

Nice ones Dave! That 5347 is a scarce knife in my opinion. Worth much more than the standard 10 dot model. At least that is my recollection off memory. Could be wrong.
Jerry

[espn77]

This has been my mail call project for a little while now. 100% of everything in the picture came from you guys. Thanks Tom, Mike, Jerry, Ray, Wayne. I'm very appreciative you guys let go of some neat items to go into my collection. Keith

[Jdub]

That is a very nice collection Kieth. I know your proud of them as you should be. Very Very nice.

[CheckSix]

These showed up today. Light is really bad for photography right now.... I'll get some better shots when the light returns.

The notable ones are:
Case XX Copperhead 6249
Case 10 Dot 5347
Roberson Shuredge Trapper 622382 in Strawberry

The other two are a '94 CCC 5355 Wharncliffe Whittler and a recent Jumbo Stock 6375 CV.

Nice ones Dave! That 5347 is a scarce knife in my opinion. Worth much more than the standard 10 dot model. At least that is my recollection off memory. Could be wrong.
Jerry

Thanks Jerry! Your memory is fine!
That 5347 in a 10 Dot, I am told is the rarest of the 10 Dot patterns. Really hard to find, I am told. Of course, you prolly have 5 of them.
The 6249 Copperhead is near mint and a 1940-64 XX.

[bdev]

These two knocked on my door today.

Both are the Queen #10 Heavy Jack pattern. The one with Rogers bone dates to 1948-50.
The other with Winterbottom composite was made circa 1958-60 and has the Q STEEL tang stamp and the Queen Steel #10 blade etch.

Love these #10's. There's something about that basic jack design. Fits great in the hand at around 3 3/4" and the clip and pen combo is timeless.

[TripleF]

Which frame is that brown Case at the top left, Scott?

What do you mean by frame? Scales?

Jerry. ...Kershaw Storm 1475 usa

[treefarmer]

bdev,
You're making me drool on my keyboard ! Those are really nice .
Treefarmer

[Tsar Bomba]

What do you mean by frame? Scales?

Which pattern is it? I thought it might be a 33 but I've never seen a 33 with a spear master, and on second look it doesn't seem to be serpentine.

[bdev]

bdev,
You're making me drool on my keyboard ! Those are really nice .
Treefarmer

Thanks. The one with Rogers bone needed some clean-up. The other, not so much.

[RalphAlsip]

This has been my mail call project for a little while now. 100% of everything in the picture came from you guys. Thanks Tom, Mike, Jerry, Ray, Wayne. I'm very appreciative you guys let go of some neat items to go into my collection. Keith

Keith, awesome group of Bullets. You're well on your way to the full set.

[espn77]

I very much appreciated that 1306 with a great etch Jerry.

[KnifeSlinger#81]

This has been my mail call project for a little while now. 100% of everything in the picture came from you guys. Thanks Tom, Mike, Jerry, Ray, Wayne. I'm very appreciative you guys let go of some neat items to go into my collection. Keith

A very awesome collection, thank you for sharing

[btrwtr]

This has been my mail call project for a little while now. 100% of everything in the picture came from you guys. Thanks Tom, Mike, Jerry, Ray, Wayne. I'm very appreciative you guys let go of some neat items to go into my collection. Keith

Kieth, I really liked that poster the first time you showed it. It looks even better now with the real deals sitting underneath it!

[espn77]

It is so much better in person. Thanks again Wayne

[Old Hunter]

Went hunting and fishing at a lodge in Alabama last week (owned by a roofing felt manufacturer); they gave each hunter a small Buck Knife, a sweatshirt, and a ballcap. I was pleased to see the knives were these little Buck lockbacks, USA made. OH

[Tsar Bomba]

That is a cool Buck, OH. Did you give it a whirl in the field or did you leave it pristine? I know you went there equipped with a blade or five.

One of my recent acquisitions is a Buck 112 with a 450 blade that I'm about 90% sure was replaced at the factory. You simply can't tell that the knife's been apart, it locks up absolutely flush and dead tight in every direction, just like a brand new mint 112. If not for the fact that the 450 blade is a drop-point (and this one has no nail nick), you could easily handle and use the knife without realizing it's a reblade.

I'm half-inclined to buy the original owner's story that it was a factory error/parts knife that made its way to him but he didn't really seem clued in regarding cutlery. Regardless, I got a great price on it and I'm glad to have it, so I figured I'd take a few minutes tonight to post a pic. More to come on the weekend.

[Colonel26]

That's a real neat Buck there OH!

[Old Hunter]

Tsar, I'd never seen one of this model, so I've just kept it (it's only 3" OAL - don't know what I would do with it while hunting). I had a Buck 110, a Buck 118, and a Case 6347 with me for any serious work - unfortunately I never saw a deer while hunting. All my knives came home clean and sharp! OH
Ps Thanks Colonel!
PPs The Case came in handy for cutting my brisket at Maurice's in Lexington SC on the trip home - good food at Piggy Park!

[Tsar Bomba]

I had a Buck 110, a Buck 118, and a Case 6347 with me for any serious work

I'd expect nothing less from an old hunter, sir.

[Old Hunter]

Tsar, you slipped one in on me! I've seen lots of wild Buck blade jobs, but most are done by good knife mechanics. A factory job like that must be a "build out" of which there are also many. I like it! OH

[Tsar Bomba]

Thanks, OH, it sure is unique, and so quickly after I finally got my first proper 112. These Buck lockbacks can multiply right quick if you aren't careful. I may just need to go out and get a "normal" 450 too, that would make some interesting photography.

[TripleF]

What do you mean by frame? Scales?

Which pattern is it? I thought it might be a 33 but I've never seen a 33 with a spear master, and on second look it doesn't seem to be serpentine.

It's a swell center, and the only portion I can read on the back is 2042?

[sakoblade]

I just got the mail and received 4 pocket knives I will use as giveaways. They are from various countries and I also received the tiniest Bowie knife I have ever seen.

It's made by Elosi in Germany and it only measures 4 inches.

Nothing special about it otherwise but I couldn't resist it as it "spoke" to me somehow.
I will present it as a novelty gift for an American friend who collects Bowies.

Now off to pick up a couple of Swedish pocket knives!

Have a great Wednesday!

Jim