Pull Ball Switch Blade Knives

ozzie marie · Post by **ozzie marie** » Mon May 05, 2014 3:30 pm

rooster,

I love that thing

Keith

roostershooter · Post by **roostershooter** » Mon May 05, 2014 3:58 pm

Thanks Keith, its a great little knife. At the bottom of the palm tree are the words
"Silver Springs".

Miller Bro's · Post by **Miller Bro's** » Mon May 05, 2014 8:59 pm

Nice ones!

Nick · Post by **Nick** » Tue May 06, 2014 8:42 pm

Hello Fellas- Here is the only Pull Ball I have, but I am hoping on getting more !!

Miller Bro's · Post by **Miller Bro's** » Tue May 06, 2014 10:51 pm

Nice knife Nick

ozzie marie · Post by **ozzie marie** » Mon May 12, 2014 8:43 pm

This Stainless just arrived

Keith

MrBlister · Post by **MrBlister** » Mon May 12, 2014 10:14 pm

NICE ern Keith !!!

HET

Nick · Post by **Nick** » Sat Jun 07, 2014 7:30 am

Just picked up this a little while ago; paperwork,box,knife is great shape. Thanks for letting me share !

ozzie marie · Post by **ozzie marie** » Tue Jun 10, 2014 1:30 am

Nick,

That paperwork is a GREAT find!

Congrats

Keith

Nick · Post by **Nick** » Tue Jun 10, 2014 6:30 pm

Thanks Keith I was excited when I saw it tucked away in the bottom of the box that the knife came delivered in. I was amazed, did not expect it. I do not think the seller knew it was there either. Thanks nice to hear from you sir !!

ozzie marie · Post by **ozzie marie** » Thu Apr 02, 2015 1:28 pm

After having no luck trying to purchase Nicks Pull Ball Instruction Sheet

I was able to acquire this Knife, Box & Instructions from Mark Erickson at the Badger Knife Show

Keith

ozzie marie · Post by **ozzie marie** » Wed Sep 14, 2016 10:08 pm

Here's one that I just added.

They sure packed the advertising on this one

Keith

MrBlister · Post by **MrBlister** » Wed Sep 14, 2016 10:34 pm

good l@@ker there Keith . .
you got quite a pile now, i'd say \\
here my only one .. . a REM

HET

1967redrider · Post by **1967redrider** » Tue Sep 20, 2016 12:52 am

Here's one I have, stamped G. SCHRADE KNIFE CO. INC B'PORT. CT USA with patent dates on the pile side. If you sharped these too much the little finger attached to the ball-pull won't cover the tip, then the blade won't stay closed.

This one works perfectly.

ozzie marie · Post by **ozzie marie** » Sat Nov 12, 2016 9:56 pm

OK, I admit I have a problem

JCN Co. 12K Gold Plated

Keith

knife7knut · Post by **knife7knut** » Sun Nov 13, 2016 12:12 am

Not quite a pull ball auto but rather a pull tab manual.Three of them have the pull on the end and two(English made)have a sliding pull button.

ozzie marie · Post by **ozzie marie** » Sat Feb 27, 2021 1:57 pm

Here's a few more I've added to the collection. Both purchased right here at AAPK.

An Orange from Lee's Knives

A Silver Springs Tourist Souvenir that was posted on this thread almost 7 years ago

Thanks Jim! (roostershooter)

Keith

edge213 · Post by **edge213** » Sat Feb 27, 2021 3:50 pm

ozzie marie wrote: ↑Sat Feb 27, 2021 1:57 pm Here's a few more I've added to the collection. Both purchased right here at AAPK.

An Orange from Lee's Knives

Pull Ball Lee's Knives.JPG

A Silver Springs Tourist Souvenir that was posted on this thread almost 7 years ago
Thanks Jim! (roostershooter)

Pull Ball Roostershooter.JPG

Keith

I really like the one with the palm tree, very colorful.

goldwood · Post by **goldwood** » Sun Feb 28, 2021 9:05 pm

You gotta love those pull balls!
I have a dozen of those in my collection. I wanted to show two of my more unusual stampings. This is the only one that I have owned where the tang is stamped stainless and the handle is plastic. I have seen the where both the handles and blade are stainless.
I got this Case XX pull ball on eBay about 15 years ago. I only recognized it because of the rear tang stamp. Case tested was ground off the front side. I was told that this was because it was a factory second? I don't know for sure.

Miller Bro's · Post by **Miller Bro's** » Mon Mar 01, 2021 1:35 am

Wow! Thanks for posting them

edge213 · Post by **edge213** » Tue Mar 02, 2021 4:27 pm

goldwood wrote: ↑Sun Feb 28, 2021 9:05 pm You gotta love those pull balls!
I have a dozen of those in my collection. I wanted to show two of my more unusual stampings. This is the only one that I have owned where the tang is stamped stainless and the handle is plastic. I have seen the where both the handles and blade are stainless.
I got this Case XX pull ball on eBay about 15 years ago. I only recognized it because of the rear tang stamp. Case tested was ground off the front side. I was told that this was because it was a factory second? I don't know for sure.20210228_143915_resized (002).jpg

Cool collection.

wiseguy · Post by **wiseguy** » Tue Mar 02, 2021 5:04 pm

goldwood wrote: ↑Sun Feb 28, 2021 9:05 pm You gotta love those pull balls!
I have a dozen of those in my collection. I wanted to show two of my more unusual stampings. This is the only one that I have owned where the tang is stamped stainless and the handle is plastic. I have seen the where both the handles and blade are stainless.
I got this Case XX pull ball on eBay about 15 years ago. I only recognized it because of the rear tang stamp. Case tested was ground off the front side. I was told that this was because it was a factory second? I don't know for sure.20210228_143915_resized (002).jpg

Nice collection, do you have the one with the file across the blade spine? I’ve only seen 2 of them in 40 years but not lately

goldwood · Post by **goldwood** » Wed Mar 03, 2021 4:00 am

I don't have one with a file across the spine. I have only seen photos. Have you ever seen one like this before? Not mine, I got outbid on eBay by a large amount over 15 years ago.

wiseguy · Post by **wiseguy** » Wed Mar 03, 2021 4:58 am

Wow ! That’s one I’ve not seen, is that scissor stamped on the tang ? I’d like to see the mark if possible. Thanks for sharing it !

goldwood · Post by **goldwood** » Wed Mar 03, 2021 4:34 pm

wiseguy wrote: ↑Wed Mar 03, 2021 4:58 am Wow ! That’s one I’ve not seen, is that scissor stamped on the tang ? I’d like to see the mark if possible. Thanks for sharing it !

I don't have any other photos of that knife. That one sold on eBay in 2007 for $242.50. In the past 20 years, I have saved photos with the prices knives sold for in a folder for future reference. I can't remember for sure if it had a tang stamp. At that price, there is a good chance it had a stamp.

All About Pocket Knives

Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives

Re: Pull Ball Switch Blade Knives