What can ya'll tell me about the model 24 schrade?

muskrat man · Post by **muskrat man** » Thu Jul 19, 2007 12:39 am

I've collected the model 24 schrade lately and I have managed to getthe 124UH the 123OT and the scrim all NIB w/ papers. I was just wondering what production numbers were, how long they were offered, all the usual juicy details

Thanks in advanced

P.S I know better than to make a post like this and not include pictures so here you go

lt632ret · Post by **lt632ret** » Thu Jul 19, 2007 3:50 am

Hey Musky. This pattern is Larrys favorite so he can tell you all the dates ect. Dale also likes this style and I am sure they both will cover it better than me. This stuff is to new for me ( just kidding er sort of) any way you also have to acquire a Lady Liberty limited edition which was both etched and made in real jigged bone. The other one in the pics I am attaching is a proto out of R+D ( research and development ). They just made this one and it was to comopete wuith some issue made by Case any way they did not like it and never produced it. I have shown these before. But thought you might enjoy the pics oh yes the photo is a company pic Schrade used to show customers. LT

W5RWU · Post by **W5RWU** » Fri Jul 20, 2007 3:13 am

I like the hunters also !! Iam going have to dig them out and post some pics

Nice knives guys

Good to see ya Lt
Randy

Gr8Scout · Post by **Gr8Scout** » Mon Jul 23, 2007 12:56 am

Many days I carry my 124UH. that I have put a one armed bandit on the blade. What a unique little knife, the looks of the big traditional folding hunter in pocket carry size. LT, does Canal street offer a version of this knife?

Phil

lt632ret · Post by **lt632ret** » Mon Jul 23, 2007 1:38 am

Not yet but they do have some amazing stuff on the drawing board. I am glad Randy likes this knife I got it for him. I get a kick watching them finish up knives special when i go up there. Have to go back this week. Dave found an old piece of memorbilia for me. Like I would miss that . LT

justold52 · Post by **justold52** » Mon Jul 23, 2007 1:56 am

lt632ret I am not sure I under stand you on this.

Dave who is that? Some one at Canal Street ?

Will you begoing to the 5th Biennial Show this week end ?
(in Titusville, Pa.)

lt632ret · Post by **lt632ret** » Mon Jul 23, 2007 2:06 am

Dave is Dave Swinden the most knowledgable man left on earth regarding Schrade and its history. If you are referring to the private message I just sent regarging the president series email me a [email protected] and I will give you my phone number. PS sorry no I will not ne going I really do not fo shows much any more. LT

muskrat man · Post by **muskrat man** » Mon Jul 23, 2007 2:09 am

thanks everyone, and nice knives. I love that oddball schrade of yours Lt. You posted thestory behind that knife once before, but I can't seem to find it

lt632ret · Post by **lt632ret** » Mon Jul 23, 2007 2:22 am

Found it in a box of R&D stuff I was going to cannabalize the pieces when Frank Giorgianni saw it and said i thought you went ga ga for protos well this one is a dandy . Turns out it was made to compete with a Case issue but they never went through with it. Frank remembered it and I had all the pieces so a little bit of history saved. LT

ea42 · Post by **ea42** » Mon Jul 23, 2007 4:00 am

LT,
I was up at Canal Street last week and they were going full tilt on the new Bowie Hunter and canittlers

. I saw Mr Swindens work table but unfortunately he was in well deserved retirement mode that day.

Eric

Gr8Scout · Post by **Gr8Scout** » Mon Jul 23, 2007 7:46 am

LT, tell your friends at Canal Street street that they need to make a five inch toothpick, handled in PEARL. No, sorry, we can't make you our forum begger for whatever patterns we collect.

I hope one of the Cannitlers they are working on is the Wolverine knife club pearl handled knives that LRV and I are waiting on.

Phil

ea42 · Post by **ea42** » Mon Jul 23, 2007 12:38 pm

Phil,
You're Wolverines were just about done. I saw about twenty of them in a box (that pearl looks nice!), waiting to have the bolsters numbered. I believe the numbering was all they had left to do.

Eric

LRV · Post by **LRV** » Mon Jul 23, 2007 2:15 pm

Eric,
Thanks for the update on the Wolverine. Seems like a year has gone by since we ordered these. I'll post what info I have in the 24's tonight. Its been a busy family weekend.
Start with this flyer
http://www.collectors-of-schrades-r.us/ ... C85-30.htm
TTYL
Larry

Gr8Scout · Post by **Gr8Scout** » Mon Jul 23, 2007 9:02 pm

Thanks for the update, Eric. I'll forward yours as soon as I get it, Larry.
Phil

LRV · Post by **LRV** » Mon Jul 23, 2007 11:39 pm

The 123OT & 124UH were 1st sdvertised in 1985 as the Pioneer and Maverick. They were in productin in 84 but unadvertised. In 1986 the 124UH Maverick was renamed to Tradesman.
In 1987 the SC524 Badger Scrim and 1988 a SC524 with 2 bears.
I dont see any in 1989 or after..

muskrat man · Post by **muskrat man** » Wed Apr 09, 2008 11:22 pm

well, LT burst my bubble when he said I had to find a liberty one. almost forgot about them when dad gave this for graduation today, now I got them all, except for LT's proto R&D knife.

ea42 · Post by **ea42** » Thu Apr 10, 2008 2:26 am

MM, congrats on the knife and graduation!

, There is one more you need to get (there's always one more

):

jonet143 · Post by **jonet143** » Thu Apr 10, 2008 3:36 am

congrats on graduating, kaleb! and cool knife to compleat a set.

muskrat man · Post by **muskrat man** » Thu Apr 10, 2008 12:36 pm

thanks guys, dang a gold etch too? I'll keep an eye out

Gunsmoke47 · Post by **Gunsmoke47** » Thu Apr 10, 2008 5:03 pm

Great knife Kaleb! Congrats on your graduation!

Though I have never met you officially, I believe you are a fine young man with dedication to anything you undertake.

Kelley

LRV · Post by **LRV** » Fri Apr 11, 2008 5:28 pm

Congrats on the graduation. Nice knife too. Still my favorite carry.
You still looking for the production numbers?
TTYL
Larry

muskrat man · Post by **muskrat man** » Fri Apr 11, 2008 10:16 pm

Thank you all.

Larry, yeah production numbers would be nice if it's not too much trouble.

thawk · Post by **thawk** » Fri Apr 11, 2008 10:33 pm

Congrats on your graduation.

Her's another 123OT to look for. Or with your talent, you could just make one.

Hukk · Post by **Hukk** » Fri Apr 11, 2008 11:30 pm

I wouldn't mind seeing a blow up of the backspring file work and the bolster work on that Fancy OT there thawk. I always love to look at new stuff and new styles. Keeps everything refreshing. Thanks, I hope you can do!

muskrat man · Post by **muskrat man** » Fri Apr 11, 2008 11:36 pm

I too would like to see closeups of the bolster work and filework. I always enjoy seeing new work. Bolster work is something I have yet to do much of yet which I think will have to try soon.

All About Pocket Knives

What can ya'll tell me about the model 24 schrade?

What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?

Re: What can ya'll tell me about the model 24 schrade?