1970s Boker
- smiling-knife
- Posts: 3365
- Joined: Mon Feb 13, 2006 8:39 pm
- Location: Bedford, UK
1970s Boker
These were made in the 1974-75. One of the boxes had a flyer for the soon to be released Great American Story knives which were released in 1976. I know there was a large stockman in this set aswell. Does anyone have it? Also do you know of any other patterns in the set? Thanks
s-k
- sunburst
- Posts: 2921
- Joined: Wed Nov 23, 2005 10:07 pm
- Location: The Scrublands of Central Florida
Hello SK, its good to see you posting..
That is a fine Boker set, I really like the rough cut jigging on those knives. I can't help you on the American Story knives but I can sure appreciate the set you have shown us. Thanks..
Sunburst
That is a fine Boker set, I really like the rough cut jigging on those knives. I can't help you on the American Story knives but I can sure appreciate the set you have shown us. Thanks..
Sunburst
“The farmer is the only man in our economy who buys everything at retail, sells everything at wholesale, and pays the freight both ways”
- smiling-knife
- Posts: 3365
- Joined: Mon Feb 13, 2006 8:39 pm
- Location: Bedford, UK
- sunburst
- Posts: 2921
- Joined: Wed Nov 23, 2005 10:07 pm
- Location: The Scrublands of Central Florida
LOL...You did a fine job of explaining it SK I just did a poor job of reading it..
Good luck in your search..
I do have a question though, as long as Boker has been in business you would think that there would be more folks collecting these knives. But instead it seems that the value does not increase like other knives even though they are affordable have quality and use great steel with many long years of being in the cutlery business..
Then again maybe I am just running in different cutlery collecting circles and have not noticed all the Boker collectors..
Sunburst
I do have a question though, as long as Boker has been in business you would think that there would be more folks collecting these knives. But instead it seems that the value does not increase like other knives even though they are affordable have quality and use great steel with many long years of being in the cutlery business..
Then again maybe I am just running in different cutlery collecting circles and have not noticed all the Boker collectors..
Sunburst
“The farmer is the only man in our economy who buys everything at retail, sells everything at wholesale, and pays the freight both ways”
- smiling-knife
- Posts: 3365
- Joined: Mon Feb 13, 2006 8:39 pm
- Location: Bedford, UK
- muskrat man
- Gold Tier

- Posts: 5684
- Joined: Fri Jun 30, 2006 4:04 am
- Location: Ohio
- Contact:
I love boker knives. anyway I do know there was a muskrat in the story collection. good luck sompleting the set, they are nice looking knives
Custom knives, repair, restoration & embellishment
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
Certified Hubertus, Taylor, & Schrade repairman past and present
http://www.muskratmanknives.com
https://www.facebook.com/Muskratmanknives
- smiling-knife
- Posts: 3365
- Joined: Mon Feb 13, 2006 8:39 pm
- Location: Bedford, UK
- MITCH RAPP
- Posts: 4184
- Joined: Sun Jul 24, 2005 5:49 pm
- Location: Southern California
- smiling-knife
- Posts: 3365
- Joined: Mon Feb 13, 2006 8:39 pm
- Location: Bedford, UK
- Duffy
- Posts: 387
- Joined: Fri Oct 12, 2007 4:03 am
- Location: south eastern U.S.
Hey S-K, Great looking knives there.
I have a double shield stockman just like the one in the picture you posted. I also have one with double shields (that are silver, not gold) dated 1971 but with round bolsters. I really like the Boker Tree Brand pocket knives. To me, most seem to have very good metal in the blades. Gotta love that in a working knife right?
A dull knife is like an empty wallet, no need to carry it.
- smiling-knife
- Posts: 3365
- Joined: Mon Feb 13, 2006 8:39 pm
- Location: Bedford, UK
- Duffy
- Posts: 387
- Joined: Fri Oct 12, 2007 4:03 am
- Location: south eastern U.S.
S-K, I will try to get you some pictures of the knife you asked for, if I can get one of my sons to fix this here puter to do so. I don't have a digital camera but I think he's got a scanner to hook up for me. May take a week or two before he gets a day off from work to come down to do it. I also have another Tree brand knife I'd like to show you. It's a 3 bladed whittler pattern with white to yellow, maybe ivory handles. It has round bolsters. It has "Wiss Commemorative LTD 1848-1973" printed on the front of the master blade. On the tang where the Boker name would normally be, there's a serial #29989 stamped. On the back of the master blade it has the tree and 8313 stamped at the tang. The smaller blades have Boker U.S.A. stamped on their tang. All the blades are shining like new. The shield isn't a round Tree Brand shield, it's two ovals connected by a tri-angle. Written on the shield in one oval is Boker over top of 1837, then in the tri-angle is 1973, then the other oval has Wiss over top of 1848. It's never been carried or used. I just oil the blades every now and then. I bought it new in 1974 if I remember it right. I have a few more knifes also. Some more Bokers (U.S.A. and German), Case, Schrade, Old Timer, Buck, Camillus, a Western made in Boulder Colorado two blade folding hunter with cracked ice handles (it looks like the same frame as my Case two blade folding hunter), and a Parker-Edwards single blade lock back with Jacksonville AL stamped on the tang, it has a Damascus steel blade and what looks to me like bone handles (and very very sharp but never used). Sorry, didn't mean to write you a book ::blah:: . I just want to learn more about all my knives too fast I guess. 
A dull knife is like an empty wallet, no need to carry it.
- smiling-knife
- Posts: 3365
- Joined: Mon Feb 13, 2006 8:39 pm
- Location: Bedford, UK
Hi Duffy. There is alot going on with that knife. It must be made during the 125 anniversary of the WISS company as the dates 1848-1973 suggest. Jacob Wiss and Sons were based in Newark NJ and originally made scissors etc. WISS bought Boker USA in 1969 and then in 1978 it became part of the Cooper Group. The factory in NJ closed and Boker USA knives were subsequently made in North Carolina until 1984. In 1986, Boker USA was bought by the German Boker co and that was the end of the US made Boker knives. Boker USA is currently based in Colorado and is the US importer for Boker knives. 1837 is believed to be the year that Herman Boeker emigrated to NY and founded H.Boker & Co. 8318 is the pattern number. I hope this is of interest.
s-k
- justold52
- Posts: 4459
- Joined: Tue Aug 01, 2006 2:47 am
- Location: Bloomington, ILL the sick state
Duffy You said "S-K, I will try to get you some pictures of the knife you asked for, if I can get one of my sons to fix this here puter to do so."
I know the feeling too. It's a sign of our age. But some of us oldies keep trying to learn....
I have this Boker and to this day have not seen one like her.
I know the feeling too. It's a sign of our age. But some of us oldies keep trying to learn....
I have this Boker and to this day have not seen one like her.
- Attachments
-
- Boker.jpeg (22.68 KiB) Viewed 6026 times
A sign In a Chinese Pet Store: 'Buy one dog, get one flea.'
- Duffy
- Posts: 387
- Joined: Fri Oct 12, 2007 4:03 am
- Location: south eastern U.S.
Thanks S-K for the Boker info. I learn more everytime I come to these forums. Justolt52, that's a real looker there friend. Can't say I've ever seen one like that. I'm sorry I haven't replyed back sooner but, my health and the hospital has had me held back. I look forward to seeing all the knives posted on here and reading all the information my little pea-brain can soak in about them.
A dull knife is like an empty wallet, no need to carry it.
-
gundoger
- Posts: 24
- Joined: Fri Jul 27, 2007 3:19 am
- Location: Albuquerque,NM
Just Old that sure is a stunner there, that's part of the "Wildlife Series" isn't it? I saw one awhile back it had a deer or a elk on it I am not sure which. That is also one of my favorite Boker pattern's, I have a few of them with different handle material.
Right now I am trying to complete the "Tang Stamp Series" in Stag. As near as I can tell I only need two more the Small Congress and the Step Bolster Congress. If anyone know's the complete listing of the series plese let me know.
Right now I am trying to complete the "Tang Stamp Series" in Stag. As near as I can tell I only need two more the Small Congress and the Step Bolster Congress. If anyone know's the complete listing of the series plese let me know.