mechanical Whimsies
- knifetime
- Posts: 1986
- Joined: Mon Aug 06, 2012 12:28 am
- Location: Ohio
mechanical Whimsies
I have, just in the last 2 or three months, found how enjoyable mechanical whimsies are to whittle.I haven't took on a caricature yet but would some day like to be able to make some of the rely nice stuff that I have saw on this thread.To git started I have been working on chains and other doodads, hear are a couple I have did for my kids to play with.
-"...and he that cleaveth wood shall be endangered thereby If the iron be blunt,and he do not whet the edge,then must he put to more strength....Ecclesiastes 10 10 ;So the good book says
sharpen your knife !!!
sharpen your knife !!!
- jerryd6818
- Posts: 39458
- Joined: Sun Jan 04, 2009 5:23 am
- Location: Farther down the road.
Re: mechanical Whimsies
Phillip -- Show us the knife or knives you did it with.
Forged on the anvil of discipline.
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
The Few. The Proud.
Jerry D.
This country has become more about sub-groups than about it's unity as a nation.
"The #72 pattern has got to be pretty close to the perfect knife."
--T.J. Murphy 2012
- knifetime
- Posts: 1986
- Joined: Mon Aug 06, 2012 12:28 am
- Location: Ohio
Re: mechanical Whimsies
Sure Jerry.
I like this old Case I have, it is a 1970 10 dot 6217 I do most of my whittling with it.I have started to use a couple Bears@Son that I have for fine work.The Bear congress has very thin pen blades that are perfect to separate links and the Barlow has a nice point on the pen blade to stop cut with.Hear are some pics the Bears have been sharpen and used a lot since I took the pics but both have held up very well.
I do plan on a nice flex cut or something similar soon.
I like this old Case I have, it is a 1970 10 dot 6217 I do most of my whittling with it.I have started to use a couple Bears@Son that I have for fine work.The Bear congress has very thin pen blades that are perfect to separate links and the Barlow has a nice point on the pen blade to stop cut with.Hear are some pics the Bears have been sharpen and used a lot since I took the pics but both have held up very well.
I do plan on a nice flex cut or something similar soon.
-"...and he that cleaveth wood shall be endangered thereby If the iron be blunt,and he do not whet the edge,then must he put to more strength....Ecclesiastes 10 10 ;So the good book says
sharpen your knife !!!
sharpen your knife !!!
- knifetime
- Posts: 1986
- Joined: Mon Aug 06, 2012 12:28 am
- Location: Ohio
Re: mechanical Whimsies
I also used a few other tools on some of the items I made,hear they are to.
-"...and he that cleaveth wood shall be endangered thereby If the iron be blunt,and he do not whet the edge,then must he put to more strength....Ecclesiastes 10 10 ;So the good book says
sharpen your knife !!!
sharpen your knife !!!
- Colonel26
- Bronze Tier

- Posts: 10404
- Joined: Sun Jul 01, 2012 3:35 am
- Location: Kentucky
Re: mechanical Whimsies
Phillip, that's just grand! Where did you get your patterns from? Or did you just dream them up? I guess what I'm asking is where would a complete ant total know nothing like me go to read up on this? Oh, I'm assuming pine?
Great job, and great knives too.
Great job, and great knives too.
“There are things in the old Book which I may not be able to explain, but I fully accept it as the infallible word of God, and receive its teachings as inspired by the Holy Spirit.”
Robert E. Lee
Robert E. Lee
- knifetime
- Posts: 1986
- Joined: Mon Aug 06, 2012 12:28 am
- Location: Ohio
Re: mechanical Whimsies
Hello Wade, how are you?Colonel26 wrote:Phillip, that's just grand! Where did you get your patterns from? Or did you just dream them up? I guess what I'm asking is where would a complete ant total know nothing like me go to read up on this? Oh, I'm assuming pine?
Great job, and great knives too.
I like pine" white pine"I don't know much about wood at all but pine seems to take a blade well.I have read that basse wood is rely good to start with and can be bought offline easy.I use what ever wood I can find lying around.Stay away from yellow pine,I can say that from experience.
I got my ideas for the patterns used hear out of books.You can go to Amazon and find books for a few dollars to start you out,and once you see what is possible you will probably have some of your own ideas.I like to make what my kids and wife like"toys and gifts"
I'm new to whittling, so I cant give you much more than that, but like I have said I would start with a good book and some white pine and a good sharp knife.I'm sure ,like me, Wade you will find a lot of joy in some of the stuff you can make out of wood with just a good ole pocketknife.
Good to hear from you and have fun and keep whittling.
-"...and he that cleaveth wood shall be endangered thereby If the iron be blunt,and he do not whet the edge,then must he put to more strength....Ecclesiastes 10 10 ;So the good book says
sharpen your knife !!!
sharpen your knife !!!
- MarkStar
- Posts: 32
- Joined: Thu Sep 13, 2012 3:52 am
- Location: NE Florida