GEC knives

richied · Post by **richied** » Sat May 12, 2007 3:37 am

I can't believe that I just discovered GEC knives,or really I can,but like what I see. Where are they built and how long have they been around?

Classic Case · Post by **Classic Case** » Sat May 12, 2007 4:16 am

This was the first run knives just released, stamped 2006.I think there were 15 different handle/ pattern combinations,between the 3 tang stamps. (great eastern cutlery-tidioute -northfield)

Hukk · Post by **Hukk** » Sat May 12, 2007 7:17 pm

There were 15 GEC knives with different handle/patterns for 2006. They are currently working on the 2007 knives. They will have the same Great Easten Cutlery, Tidioute, and Northfield names. I sure hope I see a good old fashioned barlow and whittler, they just aren't the same anymore.

The first 250 knives of each pattern will have serial numbers and any made after that will not be serialized. That's what I hear anyway. I look forward to seeing what patterns they will have.

knifeswapper · Post by **knifeswapper** » Sun May 13, 2007 2:38 am

Does anybody have the 15 variations documented here?

Classic Case · Post by **Classic Case** » Sun May 13, 2007 2:48 am

GREAT EASTERN CUTLERY

# 23 PIONEER RED DIAMOND JIG BON
# 23 PIONEER AMBER HORSECUT BONE
# 23 PIONEER SMOOTHBONE- GEC ETCH
#73 SCOUT SHEFFIELD TOBACCO BONE
#73 SCOUT RODGERS GREEN TEA BONE

TIDIOUTE

# 23 PIONEER DIAMONDBACK AMBER BONE
# 23 PIONEER BAKOTE WOOD
#73 SCOUT CHESTNUT JIGGED BONE
#73 SCOUT BAKOTE WOOD

NORTHFIELD

# 23 PIONEER BRICK RED JIGGED BONE
# 23 PIONEER ANTIQUE GREEN JIGGED BONE
# 23 PIONEER STAG
# 23 PIONEER SMOOTH RED BONE
#73 SCOUT WALNUT HERRINGBONE
#73 SCOUT STAG

Hukk · Post by **Hukk** » Sun May 13, 2007 3:30 am

Classic Case wrote:GREAT EASTERN CUTLERY

# 23 PIONEER RED DIAMOND JIG BON
# 23 PIONEER AMBER HORSECUT BONE
# 23 PIONEER SMOOTHBONE- GEC ETCH
#73 SCOUT SHEFFIELD TOBACCO BONE
#73 SCOUT RODGERS GREEN TEA BONE

TIDIOUTE

# 23 PIONEER DIAMONDBACK AMBER BONE
# 23 PIONEER BAKOTE WOOD
#73 SCOUT CHESTNUT JIGGED BONE
#73 SCOUT BAKOTE WOOD

NORTHFIELD

# 23 PIONEER BRICK RED JIGGED BONE
# 23 PIONEER ANTIQUE GREEN JIGGED BONE
# 23 PIONEER STAG
# 23 PIONEER SMOOTH RED BONE
#73 SCOUT WALNUT HERRINGBONE
#73 SCOUT STAG

Does anyone have the final numbers? There are some that less than 100 were made, even some less than 80 I believe.

singin46 · Post by **singin46** » Sun May 13, 2007 5:27 am

Yes Hukk, #23 Horse cut jigged bone had 80 made.
#23 Diamond cut bone had only 70 made
#23 Northfield UN-X-LD smooth dyed bone had only 20 made
#23 and #73 in the Bakote Tidioute had only 80 of each pattern made

Got my info from Perry Millers site.

Singin46

Hukk · Post by **Hukk** » Sun May 13, 2007 1:40 pm

# 23 PIONEER SMOOTHBONE- GEC ETCH 97
# 23 PIONEER DIAMONDBACK AMBER BONE Tidioute 177

Those are the numbers from Bill Horn's site Cumberland Knife Works

http://www.cumberlandknifeworks.com/index.php

Maybe we can piece it togetner. Perry or Bill may have the total output.

Classic Case · Post by **Classic Case** » Sun May 13, 2007 1:55 pm

i am a little skeptical about there only being 20 of the smooth redbone northfield.I hope those numbers are correct, as i would own 20% of the 20 count.If that is the true #, i dont know how i got that lucky.

Hukk · Post by **Hukk** » Sun May 13, 2007 2:04 pm

Classic Case wrote:i am a little skeptical about there only being 20 of the smooth redbone northfield.I hope those numbers are correct, as i would own 20% of the 20 count.If that is the true #, i dont know how i got that lucky.

Amen to that, I have 2 of them, so that's 10% but I heard the # 23 PIONEER ANTIQUE GREEN JIGGED BONE was one with real low numbers. I have 2 of them also. I got mine because I was asking about new releases nearly every day.

singin46 · Post by **singin46** » Sun May 13, 2007 3:11 pm

Well I don't think Perry would have it on his site if he had'nt asked the heads of GEC and I know he and Bill Horn talk all the time and Bill is one of the largest distributors of the line. So I'm goin with these numbers my friends. I'm gonna see Bill Horn today, hes delivering some knives to me,
so I'll ask him.

Singin46

Classic Case · Post by **Classic Case** » Sun May 13, 2007 3:32 pm

One of the reasons im not sure,is i saw those production #'s before any of them had been released,and we all know things can change.I sincerely hope that # is correct,but ill wait a bit before accepting them as fact.

singin46 · Post by **singin46** » Sun May 13, 2007 3:37 pm

Yeah, there may be even less or we may never know exactly.

Singin46

Knifekid · Post by **Knifekid** » Sun May 13, 2007 5:44 pm

The final numbers did change a bit. There was some handle material damaged during assembly so they weren't able to make the exact numbers originally advertised. As soon as the exact counts are available I, and likely Bill horn as well, will post them on the web sites.

On a side note, I managed to pick up two Stags at the Shepherdsville show this weekend. Ryan Daniels of GEC was set up right behind me and had bought them back from a customer. He paid the customer 150.00 each for them and charged me the same. All of the knives have sold well but, the stag has done the best by far.

I also picked up two Prototypes with the 2007 tang stamp. They are Northfields (1095 carbon). They're sending me certificates for them and I'll likely put them on the web site.

Also, I just got back from Shepherdsville and my email is down. I have a bunch of replies to send and am not able to at this time, hopefully it will be up by tomorrow.

Classic Case · Post by **Classic Case** » Sun May 13, 2007 6:12 pm

thanks for that bit of info.

singin46 · Post by **singin46** » Mon May 14, 2007 5:00 am

They also made this little baby in a run of only 21, Bark Moss Green.
Bill told me why they did this but have to talk to him again because I was too busy lookin at the knife and did'nt listen

gonna find out though. Northfield UN-X-LD.

Singin46