All Metal Handle Knives

Iron Hoarder · Post by **Iron Hoarder** » Wed Jun 13, 2012 5:43 am

Those are spectacular!!

galvanic1882 · Post by **galvanic1882** » Fri Jun 15, 2012 6:47 pm

Here is an odd one that I just picked up. I had a pearl handled one just like it that did not have the levers to open the blades. They were gone and the man I got it from made a tool to open the blades. This one is marked E.Zinn Germany. Pretty cool the way the levers slid in and out to open the blades!!

Iron Hoarder · Post by **Iron Hoarder** » Fri Jun 15, 2012 7:25 pm

I've got the Ocean Insurance advertising version of this knife. can you do more pictures? The levers are missing off of mine. Dimitri will like to see this. Now I know what they look like.

dragon25 · Post by **dragon25** » Fri Jun 15, 2012 8:08 pm

galvanic1882 wrote:Here is an odd one that I just picked up. I had a pearl handled one just like it that did not have the levers to open the blades. They were gone and the man I got it from made a tool to open the blades. This one is marked E.Zinn Germany. Pretty cool the way the levers slid in and out to open the blades!!

That's really a rare and Nice one Mike nice score .You seem to have a nack for finding these. I have seen one other German knife made like this one but it had a"Bristol" stamp. It was also a German made knife. I had bid on it but got beat out on it and have regretteed not bidding higher as I have yet to see another . It and yours have been the only two German style knives I've seen with this style of mechanisms . Which the opening mechanisms look a little different . Is yours different much form the Hatch, Wilzon or Automatic knife company stamped knives( like the last 2 pictures ) or do they pretty much all work the same ??

Miller Bro's · Post by **Miller Bro's** » Tue Jul 10, 2012 3:55 am

Nice ones, I like unusual old knives

LC · Post by LC » Wed Jul 11, 2012 2:12 am

tjmurphy · Post by **tjmurphy** » Thu Jul 12, 2012 5:41 pm

Don't know how I left this one out. 1997 Zippo/Case Visitor's Center. Commemorates the opening of the Visitor's Center in Bradford, PA. Number 0372/1000 sets. Handles are pewter. Presentation case is cherry with laser engraving.

paulsvintage · Post by **paulsvintage** » Thu Jul 19, 2012 11:43 pm

very nice Tom. great one to hold on too !

tjmurphy · Post by **tjmurphy** » Fri Jul 20, 2012 2:04 am

Thanks Paul. They did two series, one for Zippo and one for Case. This one is for Zippo.

shugy · Post by **shugy** » Sat Jul 21, 2012 3:51 pm

Howdy all, boy this gets overwhelming at times,I can't remember what thread I've been on or which knives Ive shown so forgive me if I'm redundant

Any way here goes, the dagger looks as if it had leather or some type of material wound around it, the knife next to it has colonial stamp on one tang, no other marks. In the other pic the one at upper left is a gerber paul knife, the others no markings. the 007jpg is a Imperial knife, army issue?

.anyway coolsite everybody is very helpful and I believe I have an addiction! Oh, I almost forgot the belt buckle knife ,Gerber.

johnnierotten · Post by **johnnierotten** » Sat Jul 21, 2012 7:17 pm

Nice knives for sure, shugy.

...what year is your Imperial Scout/Utility knife?.....I've seen a lot of those Gerber's..but never with just metal handles..do you think it originally came out that way?

shugy · Post by **shugy** » Sun Jul 22, 2012 2:57 pm

Thanks Jr, I did'nt realize that was a scout knife, yr is 1966. as for the gerber as far as I can tell it is original as is and it has a little leather sheath for it also :mrgreen:Since this was the first time I really looked at these knives I missed the fact one of the springs on the scout is broken, any ideas on where to look for replacement?

johnnierotten · Post by **johnnierotten** » Sun Jul 22, 2012 8:09 pm

Actually its not..

..it’s a utility knife for the US Army.....I call them Scout/Utility because they have the same blades...sorry,didn't mean to steer you wrong.

I recently purchased a 1967...and was warned to keep it oiled good because they are prone to back spring breakage.

I'm sure there are plenty of members that could fix it for ya or have a sprig.....maybe post it in the want ads forum or restoration forum.

shugy · Post by **shugy** » Sun Jul 22, 2012 8:18 pm

No worries JR, I don't know what I'm looking at half the time and the other half I'm just plain lost!But thanks for the info will advertise as suggested, see what turns up. I would like to figure out what the dagger is and what was on the handle,any ideas? ::hmm::Was looking closer at the US knife and noticed one of the rivets has what looks like a snap ring keeper on it? curious because the other two do not?

johnnierotten · Post by **johnnierotten** » Sun Jul 22, 2012 8:32 pm

Back side center pin?.....I don't have mine readidly at hand to see.

....my guess would be its there to make sure that it doesn't come apart....and maybe to take apart more easily.

Since that is the pivot pin.

shugy · Post by **shugy** » Sun Jul 22, 2012 8:39 pm

Backside left pin, strange because it won't come apart with just that one removed?

johnnierotten · Post by **johnnierotten** » Sun Jul 22, 2012 8:46 pm

Partner...I have no idea.

Hopefully someone will pipe in that has more knowledge about them.

....Dimitri (Miller Bro`s) would definitely know.

shugy · Post by **shugy** » Sun Jul 22, 2012 8:50 pm

Thanks anyway!

Miller Bro's · Post by **Miller Bro's** » Sun Jul 22, 2012 10:23 pm

shugy wrote:Was looking closer at the US knife and noticed one of the rivets has what looks like a snap ring keeper on it? curious because the other two do not?

Please show a picture of the other side so I can see what you are talking about.

shugy · Post by **shugy** » Mon Jul 23, 2012 4:28 pm

Howdy Miller bro, I don't know if these are clear enuff, might have to use diff camera.

tjmurphy · Post by **tjmurphy** » Mon Jul 23, 2012 5:06 pm

Looks like that may be where the bail was broken off.

johnnierotten · Post by **johnnierotten** » Mon Jul 23, 2012 6:58 pm

Good call, TJ.

that’s what it be.

shugy · Post by **shugy** » Mon Jul 23, 2012 7:07 pm

that was a good call TJ, the other side looks the same but no piece left on it. By the way
tj is one of my nephews name also,stands for trey joseph.

johnnierotten · Post by **johnnierotten** » Thu Jul 26, 2012 2:04 am

Got this one in a few days ago....had to clean it up quite a bit.

shugy · Post by **shugy** » Thu Jul 26, 2012 6:50 pm

pretty lil thing JR, is it a Imperial also?

All About Pocket Knives

All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives

Re: All Metal Handle Knives