Mail Call !-Post your new pick-ups here............

TripleF · Post by **TripleF** » Fri Nov 11, 2011 2:50 am

Knice cato!!

Just Plain Dave · Post by **Just Plain Dave** » Fri Nov 11, 2011 3:25 am

That jack is the Bee's Knees my man!!!!!

cato · Post by **cato** » Fri Nov 11, 2011 4:11 am

thank you it is 3 and 5/8 and it has not seen a rock but a few times great snap
and the well is clean
thanks again gentlemen

cato

OLD GAR · Post by **OLD GAR** » Fri Nov 11, 2011 6:40 am

Got a "PROBLEM" I just got this one that will substitute, at least for a while, my Darlin's daddy's "Grand Dads Old Timer". That old green side suffered a snapped off main blade and some other "farm related" abuse. I had looked for several years for one to scavenge a blade and re-blade the old guy to give to one of his grand kids.

Now this one is pristine, has been sharpened but is near mint. These are serialized and the shields have the birthday. it is the same as Daddy-in-Law's - - "1974"

I could BS the young man I had intended to give it to and tell him how I slaved and searched for the right parts to repair his Great Grand Dad's . . "Grand Dad's Old Timer"? Or should I actually dismantle this really nice knife and put the blade in Pappa's frame?

basser5 · Post by **basser5** » Fri Nov 11, 2011 2:05 pm

This little sweety came in yesterday

Tim

Just Plain Dave · Post by **Just Plain Dave** » Fri Nov 11, 2011 2:54 pm

Interesting Rooster Basser!

jerryd6818 · Post by **jerryd6818** » Fri Nov 11, 2011 3:00 pm

OLD GAR wrote:Got a "PROBLEM" I just got this one that will substitute, at least for a while, my Darlin's daddy's "Grand Dads Old Timer". That old green side suffered a snapped off main blade and some other "farm related" abuse. I had looked for several years for one to scavenge a blade and re-blade the old guy to give to one of his grand kids.

Now this one is pristine, has been sharpened but is near mint. These are serialized and the shields have the birthday. it is the same as Daddy-in-Law's - - "1974"

I could BS the young man I had intended to give it to and tell him how I slaved and searched for the right parts to repair his Great Grand Dad's . . "Grand Dad's Old Timer"? Or should I actually dismantle this really nice knife and put the blade in Pappa's frame?

Well, he wouldn't know. But you would. You have control of the outcome. Only you can make the 'right' decision.

Edit: Food for thought. I'm unclear on who broke the blade. If Daddy-In-Law broke the blade, pass the knife on as is. If someone else broke it after it passed from the hands of D-I-L, you might want to consider repairing the knife.

jerryd6818 · Post by **jerryd6818** » Fri Nov 11, 2011 3:04 pm

basser5 wrote:This little sweety came in yesterday

Tim

My mouth is waterin', my eye is twitchin'. I think I may be in love. (with the knife, not with you)

TripleF · Post by **TripleF** » Fri Nov 11, 2011 8:09 pm

Knice knife basser

basser5 · Post by **basser5** » Fri Nov 11, 2011 10:36 pm

Thanks fellas

Tim

rangerbluedog · Post by **rangerbluedog** » Sat Nov 12, 2011 1:20 am

nice congress jack Tim. I likey!

basser5 · Post by **basser5** » Sat Nov 12, 2011 2:21 am

Thanks Blue

Tim

Cooter Brown · Post by **Cooter Brown** » Sat Nov 12, 2011 2:28 am

Nice hauls, everyone.

Cato, that jackknife makes my heart go pitter pat! Sweetest knife I've seen in a while...I'd love to find one of those!

Just Plain Dave · Post by **Just Plain Dave** » Sat Nov 12, 2011 3:44 pm

Picked these up at the PO several days ago. BIG Kudos to Viking Dog!

An EAGLE over PHILA 4 inch Jack Knife (I work on the blade a little at a time)

And a USED but USEABLE Camillus TL29

I knew the Eagle was coming. The Cammy was a nice surprise!

gringo · Post by **gringo** » Mon Nov 14, 2011 6:55 pm

i found this sweetie this weekend...along side the scout knife i posted earlier....yes jerry...five dollars...
the main blade is damaged from stripping wire...little nicks and flat spots...looks like it was tipped...some minor damage on the scale above the shield...looks like it dropped against a generator belt while the engine was running...

still walks an talks

jerryd6818 · Post by **jerryd6818** » Mon Nov 14, 2011 11:30 pm

Five bucks and on top of that, it's an IXL George Wostenholm with a long pull and swedged blade. Great find. You done good bub.

PigSticker · Post by **PigSticker** » Tue Nov 15, 2011 7:28 pm

Got these one night last week impulse shopping on Ebay bought as a lot-seller had crap pictures so there were'nt any bids on em-had to do a little cleanup on the German Boker-looked like it took a little voltage at one time-the Remington knife is a secound just a little spec on the back handle is all i could find wrong with it but looks like a USA even--The Craftmen has a sheild on both sides the one on the back is oval I'm guessing for engraving a name or initals and a full size Camillus stockman--good score fer $23.99

gringo · Post by **gringo** » Tue Nov 15, 2011 7:30 pm

nice score.

jerryd6818 · Post by **jerryd6818** » Tue Nov 15, 2011 8:03 pm

I guess, nice score. For six bucks apiece, call a cop 'cause you stole 'em.

Just Plain Dave · Post by **Just Plain Dave** » Fri Nov 18, 2011 2:19 am

It is built very well. None of the edges except the cutting edge are sharp.

Sanrenmu 605 from China.

IMBand · Post by **IMBand** » Fri Nov 18, 2011 6:52 pm

Dave - I have one Sanrenmu and it is very well made, I will be buying more of them.

Here are a couple Wengers, a SwissChamp and a real neat Gerber. The operation of the Gerber is AWESOME...just
press the button and then the smallest flick of the wrist its open, super slick. I like the couple tools they added too.
Carried several Gerbers over the years (mostly USA) and I am never disappointed.

IM

TripleF · Post by **TripleF** » Fri Nov 18, 2011 9:23 pm

PigSticker, IMBand, Just Plain Dave......knice scores dudes!! Awesome knives!!

This rascal landed in my knet today!

JWS · Post by **JWS** » Fri Nov 18, 2011 10:30 pm

Father in Law stopped by this afternoon and gifted me this Buck 112

gino · Post by **gino** » Fri Nov 18, 2011 10:37 pm

Nice gift Jerry! Is it your birthday or was he just being nice?

JWS · Post by **JWS** » Fri Nov 18, 2011 10:51 pm

No not birthday. I am afraid he may be wanting something

All About Pocket Knives

Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............

Re: Mail Call !-Post your new pick-ups here............