He's Back--Again and Again.... How long will it last??

A place to discuss & share pictures of counterfeit knives. Please be sure to alert the AAPK community if you spot one. Also make sure to ask questions if you are not certain about the authenticity of a knife you are considering buying or selling. There are plenty of great people here willing to help.
Post Reply
ole_muddy
Posts: 365
Joined: Thu Aug 16, 2007 11:52 pm

He's Back--Again and Again.... How long will it last??

Post by ole_muddy »

http://cgi.ebay.com/VTG-CASE-TESTED-XX- ... 1e5ff4994f

Another masterpiece of reconstruction of "old original parts". I have a bottle of Tabasco in the fridge that I'd bet is older than these so-called "original parts".

"There's a sucker born every minute"..... P.T. Barnum

I'd rather have a two-headed calf.

Eric


Moderators Note: Photos below from ebay listing added to post by moderator.
Attachments
Candy Stripe Tang Stamp.jpg
Candy Stripe.jpg
User avatar
Elvis
Posts: 2185
Joined: Tue Dec 22, 2009 2:22 pm
Location: Cincinnati, Ohio USA

Re: He's Back--Again and Again.... How long will it last??

Post by Elvis »

And now, he's claiming to have ethics:

"SOME SMALL SPOTS OF RUST NO PIVETS IT CAN BE BUFFED OUT IF YOU LIKE I DONT BUT SOME PEOPLE DO."

I don't know why I let this guy piss me off as much as I do. ::dang::
User avatar
geno1201
Posts: 124
Joined: Sun Aug 01, 2010 3:27 pm
Location: johnstown pa.

Re: He's Back--Again and Again.... How long will it last??

Post by geno1201 »

::td:: im not sure but i think this is a bad job refixing this knife 1st pic zoom in on bottom bolster notice the over hang of the stag i think its a bad job what do you think?http://cgi.ebay.com/CASE-XX-1940-64-Vin ... 4aa556c8be
"what will be is what will be"
gino
Posts: 8371
Joined: Sun Feb 28, 2010 3:50 pm
Location: Pa
Contact:

Re: He's Back--Again and Again.... How long will it last??

Post by gino »

Last one he had was a candy stripe also wasnt it???
-( life is too short to carry a cheap knife )-
User avatar
Forensic Jim
Posts: 2512
Joined: Thu May 31, 2007 2:35 pm
Location: Tawas City, Michigan

Re: He's Back--Again and Again.... How long will it last??

Post by Forensic Jim »

If I'm not mistaken, muskrat blades were only used from 65-69 era. Knife is pure junk. ::td::
RIP Johnnie Rotten

So far, so good...So What!!
Blade Runner
Posts: 1109
Joined: Sat Feb 11, 2006 1:50 am
Location: Gainesville Georgia

Re: He's Back--Again and Again.... How long will it last??

Post by Blade Runner »

:lol: :lol: :lol: :lol: :lol: What a joke ::td::
Listen with your eyes, it's the only way you can believe what you hear.
rigwelder
Posts: 1539
Joined: Wed Dec 20, 2006 2:49 pm
Location: Buffalo, Oklahoma

Re: He's Back--Again and Again.... How long will it last??

Post by rigwelder »

I came across this jewel earlier today.
First thing that came to my mind was,,,what a pitifull fake tested knife. ::td::
tortelvis
Posts: 54
Joined: Sun Mar 28, 2010 5:55 am

Re: He's Back--Again and Again.... How long will it last??

Post by tortelvis »

this candy stripe looks like a 1990s case classic made by queen. just for its beauty it is worth something as a rebuilt knife if properly disclosed as such.$50??. any thoughts ?? thank you
Aimus Moses
Posts: 1129
Joined: Thu Sep 17, 2009 3:57 pm

Re: He's Back--Again and Again.... How long will it last??

Post by Aimus Moses »

Hi John and ::welcome:: Most of us here at AAPK try not to give 1 red cent to any seller of fake knives. That is unless we get taken by a fake then they get put on here and handled as such. Buying from the sellers of fakes is kinda like giving the enemy bullets. This particle seller is well known to most all here on AAPK and is dodged.

Aimus
Aimus Moses
Posts: 1129
Joined: Thu Sep 17, 2009 3:57 pm

Re: He's Back--Again and Again.... How long will it last??

Post by Aimus Moses »

Aimus Moses wrote:Hi John and ::welcome:: Most of us here at AAPK try not to give 1 red cent to any seller of fake knives. That is unless we get taken by a fake then they get put on here and handled as such. Buying from the sellers of fakes is kinda like giving the enemy bullets. This particlar seller is well known to most all here on AAPK and is dodged.

Edit: The shield as well as other "parts" remove this candy stripe knife from being from the Queen made Case Classic series. Queen didn't make the 54 trapper pattern in the Case Classic series anyway, Case made those for the Classic series in house.


Aimus
User avatar
gmusic
Posts: 3145
Joined: Tue Oct 04, 2005 7:27 pm
Location: Piute Mountains.
Contact:

Re: He's Back--Again and Again.... How long will it last??

Post by gmusic »

John I believe all the Classics have the year date on the tang stamp like this. Good thing too!
Attachments
Case#92.JPG
http://www.musicmadeknives.com

Rodger, (Rodger-50/2050), Bill (El Lobo), Johnny Fain (jonet143), Johnny Samples (Johnnyrotten),
Bill Price (CCBill)


Please feel free to contact any mod or admin with concerns.
knifeaholic
Gold Tier
Gold Tier
Posts: 5601
Joined: Fri Feb 03, 2006 3:41 am
Location: Central Massachusetts

Re: He's Back--Again and Again.... How long will it last??

Post by knifeaholic »

Cabinet maker had another success.
Steve Pfeiffer, author of Collecting Case Knives: Identification and Price Guide published by Krause Publications.
tortelvis
Posts: 54
Joined: Sun Mar 28, 2010 5:55 am

Re: He's Back--Again and Again.... How long will it last??

Post by tortelvis »

yes these sellers are very crooked and should be avoided or worse. i am just in love with the candy stripe handles. they make anything look kinda good! some of those phony bone and stags can look pretty bad sometimes when its done all wrong. this is the prettiest fake i have seen.
buckeyefan
Posts: 864
Joined: Sat Oct 31, 2009 9:52 pm

Re: He's Back--Again and Again.... How long will it last??

Post by buckeyefan »

"FILL FREE TO CHECK MY FEEDBACKS."
I would like to " FILL" his feedbacks with my honest "FILLINGS"! :x ::huff:: ::td:: ::smack::

Marty
The second mouse always get's the cheese..
User avatar
superdavemack
Posts: 113
Joined: Wed Nov 03, 2010 6:05 pm
Location: Vancouver,WA

Re: He's Back--Again and Again.... How long will it last??

Post by superdavemack »

I'm guessing this guy spends more time putting together phony knives than he does proof reading his text......the sad thing is I'm relatively knew to knife collecting and old candy stripes are my weakness, this is the kind of knife I could accidentally be suckered into buying,,,,,,,,keep up the good work exposing this guy. I was at a knife show recently and I saw a knife with waterfall handles that I loved and he offered it to me for 10 bucks which I almost dove for my wallet, and then he went on to explain he got it from a buddy that was a novice knife tinkerer and that nothing matched, he was as honest and upfront as could be and I ended up not buying the knife but at least he portrayed it for what it was........over 200 bucks for this candy stripe frankenknife is not right!
road_warri0r
Posts: 120
Joined: Fri Jan 15, 2010 2:00 am

Re: He's Back--Again and Again.... How long will it last??

Post by road_warri0r »

Quite ironic I would say, as many bogus knives as this man has sold, I noticed he recently got a negative feedback for a counterfeit coin....
Knife Nut
Gold Tier
Gold Tier
Posts: 2106
Joined: Sat Sep 05, 2009 2:50 pm
Location: Southern Indiana

Re: He's Back--Again and Again.... How long will it last??

Post by Knife Nut »

I'd like to knock a few of his "FILLings" out of his mouth.
::smack::

Paul
WildfireTommyRich
Posts: 21
Joined: Sat Jun 19, 2010 3:00 pm

Re: He's Back--Again and Again.... How long will it last??

Post by WildfireTommyRich »

And the claim of buying parts from "Mr. Jim Parker"....absolute FARCE. There's a dealer from the state of Kentucky who sets up at knife shows who has all kinds of parts and handle materials, I know where he gets his "old finds". It's convenient to verify where the "parts" came from with someone deceased. Whats this guy's real name? Anyone know? ::barf::
buckeyefan
Posts: 864
Joined: Sat Oct 31, 2009 9:52 pm

Re: He's Back--Again and Again.... How long will it last??

Post by buckeyefan »

Knife Nut wrote:I'd like to knock a few of his "FILLings" out of his mouth.
::smack::

Paul

Thats too funny! LOL :lol: :lol: :lol: :lol: :lol:
The second mouse always get's the cheese..
User avatar
RobesonsRme.com
Posts: 10131
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: He's Back--Again and Again.... How long will it last??

Post by RobesonsRme.com »

His Ebay ID is short for Red Headed Stranger. Whether he looks like Willie Nelson or just liked that particular album, I'm not sure.

If I remember correctly, he is quite young twenty-four or so.

He does not make the knives himself. He buys them from a parts seller/knife mechanic/builder that we have all seen at knife shows around the SouthEast.

I've discussed the problem of these knives with him at great length. He doesn't recognize them as being a problem.

I've made it very plain to him that any money he gets for one of these over the going price of a good, current production EDC, i.e. fifty to seventy-five dollars is fraudulently earned.

He doesn't seem to care. He is not going to stop.

I really don't think he's been around vintage knives long enough himself to understand how wrong his selling practices are.

I'm almost willing to believe that the supplier of the knives has deluded him and he frankly doesn't know any better.

I said "almost willing to believe". He's now been told by enough honest collectors such that any reasonble man or boy would have changed their ways by now.

He hasn't.

Charlie Noyes
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
road_warri0r
Posts: 120
Joined: Fri Jan 15, 2010 2:00 am

Re: He's Back--Again and Again.... How long will it last??

Post by road_warri0r »

I have been to many knife shows in the last year, is the person who makes these knives a rather large guy in his early- mid 40's?
User avatar
RobesonsRme.com
Posts: 10131
Joined: Wed Jan 28, 2009 3:44 pm
Location: The Heart of Dixie.
Contact:

Re: He's Back--Again and Again.... How long will it last??

Post by RobesonsRme.com »

If it's the one I'm thinking of, he is slim, of short stature and balding head.

His table consists mostly of boxes of parts, but there is always a scattering of what looks like very nice vintage knives in the center of the table, lying flat on the table cloth.

Charlie Noyes
DE OPPRESSO LIBER

"...Men may spurn our appeals, reject our message, oppose our arguments, despise our persons ___but they are helpless against our prayers. "

Sidlow Baxter
88case
Posts: 30
Joined: Tue Oct 21, 2008 7:07 pm

Re: He's Back--Again and Again.... How long will it last??

Post by 88case »

Charlie...you are correct. At the Parker Show in Seveirville...3rd Aisle Front table. If its not him...they share alot in common.
WildfireTommyRich
Posts: 21
Joined: Sat Jun 19, 2010 3:00 pm

Re: He's Back--Again and Again.... How long will it last??

Post by WildfireTommyRich »

Yep the fellow from Kentucky,always has them same tables at that show.
Post Reply

Return to “Counterfeit Watch”