Germany - Multi Tool With Glass Cutter.

[New_Windsor_NY]

Recently, my trip to the post office produced this, multi-tool with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest, multi-tool pocket knife, with a glass cutter, to be added to my collection. It is a DIXON, two blades, two tools (a corkscrew and a glass cutter), one tang stamp, 3 5/8" closed, all metal (except for the two "tortoise" scales), multi-tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "DIXON (over) CUTLERY Cᴏ̲ (over) RHINELAND" This is my fifth DIXON, multi tool with a glass cutter, pocket knife. My other four DIXON, multi-tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a WEAK half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. The secondary blade does have a WEAK half stop. The secondary blade does have an OK opening snap. The secondary blade does have an OK closing snap. The corkscrew and the glass cutter, open and close without issues. This pocket knife is in GOOD condition. This pocket knife did require cleaning.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
DIXON (over) CUTLERY Cᴏ̲ (over) RHINELAND - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1920.

[New_Windsor_NY]

Except for the ad shown below, I NEVER saw this particular, multi-tool with a glass cutter, pattern or style of pocket knife.
The closest I came was tang stamped DIXON CUTLERY Cᴏ̲ , GERMANY. Please see my post from Sunday, November 10, 2024.
I NEVER thought that I would actually find, and obtain, one of THESE, multi-tool with a glass cutter, pocket knives.
Presenting.....The WONDER KNIFE!!!

Recently, my visit to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a UTICA, eight tools (a wire stripping blade, a screwdriver, a notch for tack removal(?) or opening a cigar box(?), a cap lifter or bottle opener, a PREST-O-LIGHT key, a can opener, a corkscrew, and a glass cutter), three tool stamps, 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi-tool, pocket knife. It is also a cigar cutter. The PREST-O-LIGHT tool's square opening, measures approximately 3/16 of an inch. The main "blade" front stamp says, "UTICA CO (over) GERMANY" The main "blade" back stamp says, "D.R.G.M." The can opener tool, front stamp says, "UTICA CO (over) GERMANY" D.R.G.M. stands for Deutsches Reich Gebrauchsmuster. Basically, German Reich Registered Design. This is my third UTICA CO, multi-tool pocket knife, with a glass cutter. My other two, UTICA CO multi-tool pocket knives, with a glass cutter, have both been previously posted, under this topic or thread. The main "blade" does have a SOFT half stop. The main "blade" does have a GOOD opening snap. The main "blade" does have a GOOD closing snap. The can opener, the corkscrew, and the glass cutter, ALL open and close with no problems. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT need cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** Here Is The Link To The "Prest-O-Light. Wrench for Squares" Topic Or Thread. *****
https://www.allaboutpocketknives.com/kn ... a1a1a4332a

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
UTICA CO (over) GERMANY - Main "Blade" Front Stamp.
D.R.G.M. - Main "Blade" Back Stamp.
UTICA CO (over) GERMANY - Can Opener Tool Front Stamp.
INFORMATION: None, But Probably From The 1920's.

[New_Windsor_NY]

As of this posting, these are the tang stamps that are on my Germany, multi-tool with glass cutter, pocket knives.
Also listed, is any information pertaining to these pocket knives, obtained from GOINS (1998 edition) and other sources.
The list is in alphabetical order. ALL of these pocket knives have been previously posted under this topic or thread.

1. A (over) G & J (over) PRODUCT (Inside A Rhombus) - Main Blade Front Tang Stamp.
GERMANY - Main Blade Back Tang Stamp.
Logo Or Symbol - Glass Cutter Stamp.
INFORMATION: None.

2. ARDOBO (over) CUTLERY Cᴏ̲ (over) SOLINGEN (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per the 12th edition, "OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Ardobo Cutlery Co. (Germany) c 1930"

3. BERK CUTLERY CO (over) NEW-YORK (over) MADE IN GERMANY - Main Blade Front Tang Stamp.
Logo Or Symbol - Glass Cutter Stamp.
INFORMATION: per GOINS, g 1910-1930.

4. CELEBRATE (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1895-1927.

5. CONTENTO (over) MADE IN (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per GOINS, g 1950-1960.

6. COSMO MFG Co (over) MADE IN (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per GOINS, "COSMO MFG. CO. GERMANY g 1900-1920 Joseph Feist (omega)
Solingen is stamped on the back of the tang. Feist made knives from about 1898-1924."
Per LEVINE, "Cosmo Mfg. Co. some by Joseph Feist Ger./Japan Importer c1920s-50s"

7. DIXON (over) CUTLERY Cᴏ̲ (over) GERMANY - Main Blade Front Tang Stamp.
DIXON (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1920.

8. DIXON (over) CUTLERY Cᴏ̲ (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1920.

9. DIXON (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

10. GERMANY - Main Blade Front Tang Stamp.
DIXON (over) Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None, But Probably c 1920's.

11. DIXON (over) CUTLERY Cᴏ̲ (over) RHINELAND - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1920.

12. FOREIGN - Main Blade Back Tang Stamp.
INFORMATION: None, But Probably c 1920's.

13. GARANTIE (over) STAHL - Main Blade Front Tang Stamp.
INFORMATION: per GOINS, g 1920-1940.

14. GELBROS Co (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per the 12th edition, "OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Gelbros. Co. (Germany) - Gellman Brothers - c 1920"

15. GELBROS Co (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per the 12th edition, "OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Gelbros. Co. (Germany) - Gellman Brothers - c 1920"

16. GERMANIA (over) CUTL. WORKS (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1896-1938.

17. LION (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

18. MADE IN (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: None.

19. MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

20. RICHARTZ - WHALE (image) (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1900-present. Variety Of Tang Stamps, Same Dates.

21. ROYAL BRAND (over) CUTLERY Cᴏ̲ (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1914-1954.

22. SAXONIA (over) CUTLERY Cᴏ̲ (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: None.

23. SAXONIA (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

24. SHEFFIELD (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

25. SOLINGEN - Main Blade Front Tang Stamp.
INFORMATION: None.

26. SOLINGEN - Secondary Blade Front Tang Stamp.
INFORMATION: None.

27. STEELEDGE (over) CUT. Cᴏ̲ (over) GERMANY - Main Blade Front Tang Stamp.
STEELEDGE (over) CUT. Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None, But Probably c 1920's.

28. SWAN WORKS (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, C 1920-present. A trademark used by Altenbach.
Per the 12th edition, "OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Swan Works (Germany) Altenbach 1901-1996"

29. SWAN WORKS (over) SOLINGEN - Secondary Blade Front Tang Stamp.
GERMANY - Secondary Blade Back Tang Stamp.
INFORMATION: per GOINS, C 1920-present. A trademark used by Altenbach.
Per the 12th edition, "OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Swan Works (Germany) Altenbach 1901-1996"

30. UNITED (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1908-1922.

31. UNITED (over) CUTLERY WORKS (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

32. UTICA Co (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

33. UTICA CO (over) GERMANY - Main "Blade" Front Tang Stamp.
D.R.G.M. - Main "Blade" Back Tang Stamp.
UTICA CO (over) GERMANY - Can Opener Tool Front Stamp.
INFORMATION: None.

34. A.W. (over) WADSWORTH (over) & SON (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per GOINS, "c 1905-1936 A trademark used by A. Kastor & Brothers"

35. A.W. (over) WADSWORTH (over) & SON (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, "c 1905-1936 A trademark used by A. Kastor & Brothers"

36. A.W. WADSWORTH (over) & SON GERMANY (over) D.R.P. - Main Blade Front Tang Stamp.
INFORMATION: per GOINS, "c 1905-1936 A trademark used by A. Kastor & Brothers"

37. WADSWORTH (over) GERMANY (over) D.R.G.M. - Main Blade Front Tang Stamp.
INFORMATION: None.

38. WINDSOR (over) CUTLERY Cᴏ̲ (over) GERMANY - Main Blade Front Tang Stamp.
WINDSOR (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1934.

[New_Windsor_NY]

This morning, my trip to the post office produced this multi tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also becomes the latest multi tool pocket knife, with a glass cutter, to be added to my collection. It is a BERK, two blades, one tool (a glass cutter), one tang stamp, 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "BERK CUTLERY Cᴏ̲ (over) NEW-YORK (over) GERMANY" There is NO logo, emblem, or symbol (a "Flaming Pineapple"?) on the glass cutter (or anywhere). This is my sixth BERK, multi tool pocket knife, with a glass cutter. However, this is my first BERK, multi tool pocket knife with a glass cutter, in THIS particular pattern or style. My other five BERK, multi tool pocket knives, with a glass cutter, were ALL previously posted, under and throughout, this topic or thread. The main blade does have a WEAK half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. The secondary blade does have a WEAK half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a VERY GOOD closing snap. The glass cutter tool opens and closes, without any problems. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning at all.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
BERK CUTLERY Cᴏ̲ (over) NEW-YORK (over) GERMANY - Secondary Blade Front Tang Stamp.
No Logo Or Symbol - No Glass Cutter Stamp.
INFORMATION: per GOINS, g 1910-1930.

***** UPDATE ***** UPDATE ***** UPDATE ***** UPDATE ***** UPDATE *****
This is a follow-up to my three previous posts from November 15, 16 & 17, 2023. It turns out that the BERK, multi-tool with glass cutter pocket knife that I posted on Monday, July 24, 2023, ALSO has the "Flaming Pineapple" logo or symbol stamped on the glass cutter. Also, besides being associated with "A - G & J PRODUCT" and "BERK CUTLERY Cᴏ̲" multi-tool, glass cutter pocket knives, it seems that the "Flaming Pineapple" is associated with the "COSMO MFG Co" multi-tool, glass cutter, pocket knives. See my post on Wednesday, September 3, 2025.

[Miller Bro's]

[New_Windsor_NY]

.....

I'm a bit late but, thank you Dimitri.

[New_Windsor_NY]

***** A PREVIOUS POST CORRECTION *****
Back on Thursday, October 30, 2025, I posted a BERK CUTLERY Cᴏ̲, multi tool pocket knife, with a glass cutter.
The following are two errors and two changes in my description of that pocket knife.
".....one tool (a glass cutter)" should read,
".....two tools (a glass cutter and a corkscrew)"

".....The glass cutter tool opens and closes, without any problems.", should read,
".....Both tools open and close without any problems."

Also, the caption for the picture of the tang stamp should say,
"The Secondary Blade Front Tang Stamp."
*************************************************
And After A Bit Of A Drought.....
A couple of days ago, my visit to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi-tool, pocket knife. This pocket knife is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my fortieth, MANOS multi-tool pocket knife, with a glass cutter. My other thirty-nine, MANOS multi-tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a SOFT half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. The secondary blade does have a SOFT half stop. The secondary blade does have an OK opening snap. The secondary blade does NOT have a closing snap. The corkscrew and glass cutter, both open and close with no issues. This pocket knife is in GOOD condition. This pocket knife did NOT need any cleaning at all.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None, But Probably From The 1920's.

[New_Windsor_NY]

Very recently, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (the two "tortoise" handle scales are missing), multi-tool, pocket knife. This pocket knife is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my forty-first MANOS, multi-tool pocket knife, with a glass cutter. My other forty MANOS, multi-tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a SOFT half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. The secondary blade does have a SOFT half stop. The secondary blade does NOT have an opening snap. The secondary blade does NOT have a closing snap. The corkscrew and glass cutter, both open and close with no issues. Overall, this pocket knife is in FAIR condition. This pocket knife did NOT require any cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** A PREVIOUS POST CORRECTION *****
Back on Thursday, October 30, 2025, I posted a BERK CUTLERY Cᴏ̲, multi tool pocket knife, with a glass cutter.
The following are two errors and two changes in my description of that pocket knife.
".....one tool (a glass cutter)" should read,
".....two tools (a glass cutter and a corkscrew)"

".....The glass cutter tool opens and closes, without any problems.", should read,
".....Both tools open and close without any problems."

Also, the caption for the picture of the tang stamp should say,
"The Secondary Blade Front Tang Stamp."
*************************************************

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None, But Probably From The 1920's.

[New_Windsor_NY]

Very recently, my visit to the post office produced this, multi tool with a glass cutter, pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my multi tool, with a glass cutter, pocket knife collection. It is a MADE IN GERMANY, one blade, four tools (a can opener, a punch or awl, a corkscrew, and a glass cutter), one tang stamp, 3 5/8" closed (not including the bail), multi-tool, pocket knife. The main blade front tang stamp says, "MADE IN (over) GERMANY" The main blade does have a WEAK half stop. The main blade does have an OK opening snap. The main blade does have a GOOD closing snap. ALL four tools open and close with no problems. Overall, this pocket knife is in VERY GOOD condition. This pocket knife did NOT need cleaning at all.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** A PREVIOUS POST CORRECTION *****
Back on Thursday, October 30, 2025, I posted a BERK CUTLERY Cᴏ̲, multi tool pocket knife, with a glass cutter.
The following are two errors and two changes in my description of that pocket knife.
".....one tool (a glass cutter)" should read,
".....two tools (a glass cutter and a corkscrew)"

".....The glass cutter tool opens and closes, without any problems.", should read,
".....Both tools open and close without any problems."

Also, the caption for the picture of the tang stamp should say,
"The Secondary Blade Front Tang Stamp."
*************************************************

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MADE IN (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: None, But Probably From The 1920's.

[New_Windsor_NY]

Very recently, my trip to the post office produced this multi tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest multi tool pocket knife, with a glass cutter, to be added to my collection. It is a SWAN WORKS, two blades, two tools (a corkscrew and a glass cutter), two tang stamps (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi tool, pocket knife. It is also a cigar cutter. The secondary blade front tang stamp says, "SWAN WORKS (over) SOLINGEN" The secondary blade back tang stamp says, "GERMANY " This is my fourth SWAN WORKS, multi tool with glass cutter, pocket knife. My other three SWAN WORKS, multi tool pocket knives, with a glass cutter, have ALL been previously posted under this topic or thread. The main blade does have a SOFT half stop. The main blade does have an OK opening snap. The main blade does NOT have a closing snap. The secondary blade does have a SOFT half stop. The secondary blade does have an OK opening snap. The secondary blade does NOT have a closing snap. The corkscrew and glass cutter, both open and close with no issues. The main blade has suffered some metal loss. The secondary blade seems to have been hammered. But overall, this pocket knife is still in FAIR condition. It did require a little bit of cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** A PREVIOUS POST CORRECTION *****
Back on Thursday, October 30, 2025, I posted a BERK CUTLERY Cᴏ̲, multi tool pocket knife, with a glass cutter.
The following are two errors and two changes in my description of that pocket knife.
".....one tool (a glass cutter)" should read,
".....two tools (a glass cutter and a corkscrew)"

".....The glass cutter tool opens and closes, without any problems.", should read,
".....Both tools open and close without any problems."

Also, the caption for the picture of the tang stamp should say,
"The Secondary Blade Front Tang Stamp."
*************************************************

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
SWAN WORKS (over) SOLINGEN - Secondary Blade Front Tang Stamp.
GERMANY - Secondary Blade Back Tang Stamp.
INFORMATION: per GOINS, C 1920-present. A trademark used by Altenbach.
Per the 12th edition, "OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Swan Works (Germany) Altenbach 1901-1996"

[New_Windsor_NY]

Recently, my visit to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi-tool, pocket knife. This pocket knife is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my forty-second MANOS, multi-tool pocket knife, with a glass cutter. My other forty-one MANOS, multi-tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a WEAK half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. The secondary blade does have a WEAK half stop. The secondary blade does have an OK opening snap. The secondary blade does have a GOOD closing snap. The corkscrew and glass cutter, both open and close with no issues. Overall, this pocket knife is in GOOD condition. This pocket knife did NOT need cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** A PREVIOUS POST CORRECTION *****
Back on Thursday, October 30, 2025, I posted a BERK CUTLERY Cᴏ̲, multi tool pocket knife, with a glass cutter.
The following are two errors and two changes in my description of that pocket knife.
".....one tool (a glass cutter)" should read,
".....two tools (a glass cutter and a corkscrew)"

".....The glass cutter tool opens and closes, without any problems.", should read,
".....Both tools open and close without any problems."

Also, the caption for the picture of the tang stamp should say,
"The Secondary Blade Front Tang Stamp."
*************************************************

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None, But Probably From The 1920's.

[New_Windsor_NY]

Recently, my trip to the post office produced this multi-tool, with a glass cutter, pocket "knife." It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a DIXON, seven tools (a wire stripping blade, a screwdriver, a notch for tack removal or opening a cigar box, a cap lifter or bottle opener, a can opener, a corkscrew, and a glass cutter), two tang stamps, 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi-tool, pocket "knife." It is also a cigar cutter. The main "blade" front stamp says, "DIXON (over) CUTLERY Cᴏ̲ (over) GERMANY" The main "blade" back stamp says, "D.R.G.M." The "D.R.G.M." stands for Deutsches Reich Gebrauchsmuster. Basically, German Reich Registered Design. This is my second DIXON, multi tool with a glass cutter pocket "knife", that is THIS particular pattern or style. Overall, this is my sixth DIXON, multi tool with a glass cutter, pocket knife. My other five DIXON, multi-tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main "blade" does have a SOFT half stop. The main "blade" does have a GOOD opening snap. The main "blade" does have a GOOD closing snap. The can opener, corkscrew, and glass cutter, ALL open and close with no problems. Overall, this pocket "knife" is in EXCELLENT condition. This pocket "knife" did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** A PREVIOUS POST CORRECTION *****
Back on Thursday, October 30, 2025, I posted a BERK CUTLERY Cᴏ̲, multi tool pocket knife, with a glass cutter.
The following are two errors and two changes in my description of that pocket knife.
".....one tool (a glass cutter)" should read,
".....two tools (a glass cutter and a corkscrew)"

".....The glass cutter tool opens and closes, without any problems.", should read,
".....Both tools open and close without any problems."

Also, the caption for the picture of the tang stamp should say,
"The Secondary Blade Front Tang Stamp."
*************************************************

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
DIXON (over) CUTLERY Cᴏ̲ (over) GERMANY - Main "Blade" Front Stamp.
D.R.G.M. - Main "Blade" Back Stamp.
INFORMATION: None, But Probably c 1920's.

[New_Windsor_NY]

Recently, my visit to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi-tool, pocket knife. This pocket knife is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my forty-third MANOS, multi-tool pocket knife, with a glass cutter. My other forty-two MANOS, multi-tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a WEAK half stop. The main blade does have an OK opening snap. The main blade does have an OK closing snap. The secondary blade does have a WEAK half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a GOOD closing snap. The corkscrew and glass cutter, both open and close with no issues. Overall, this pocket knife is in GOOD condition. This pocket knife did NOT need any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** A PREVIOUS POST CORRECTION *****
Back on Thursday, October 30, 2025, I posted a BERK CUTLERY Cᴏ̲, multi tool pocket knife, with a glass cutter.
The following are two errors and two changes in my description of that pocket knife.
".....one tool (a glass cutter)" should read,
".....two tools (a glass cutter and a corkscrew)"

".....The glass cutter tool opens and closes, without any problems.", should read,
".....Both tools open and close without any problems."

Also, the caption for the picture of the tang stamp should say,
"The Secondary Blade Front Tang Stamp."
*************************************************

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None, But Probably From The 1920's.

[New_Windsor_NY]

Recently, my trip to the post office produced this multi-tool with a glass cutter, smoker's pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool with a glass cutter, pocket knife collection. It is a DIXON, one blade, four tools (a pipe bowl scraper, a pipe stem reamer, a corkscrew, and a glass cutter), one tang stamp, 3 5/8" closed, all metal (except for the one "tortoise" handle scale, one is missing), multi-tool, smoker's pocket knife. It is also a cigar cutter. The main blade front tang stamp says, "DIXON (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my first DIXON, multi-tool with a glass cutter, smoker's pocket knife. Overall, this is my seventh DIXON, multi-tool with a glass cutter, pocket knife. My other six DIXON, multi-tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a SOFT half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. The bowl scraper, stem reamer, corkscrew, and the glass cutter, ALL open and close with no problems. Overall, this pocket knife is in GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** A PREVIOUS POST CORRECTION *****
Back on Thursday, October 30, 2025, I posted a BERK CUTLERY Cᴏ̲, multi tool pocket knife, with a glass cutter.
The following are two errors and two changes in my description of that pocket knife.
".....one tool (a glass cutter)" should read,
".....two tools (a glass cutter and a corkscrew)"

".....The glass cutter tool opens and closes, without any problems.", should read,
".....Both tools open and close without any problems."

Also, the caption for the picture of the tang stamp should say,
"The Secondary Blade Front Tang Stamp."
*************************************************

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
Back on Friday, September 22, 2023, under this topic or thread, I posted an UNBRANDED, multi-tool with a glass cutter, smoker's pocket knife. My posts on Sunday, September 24, 2023, on Friday, January 12, 2024, and on Tuesday, January 23, 2024, were ALL posts of three, ROYAL BRAND CUTLERY Cᴏ̲ GERMANY, multi-tool with a glass cutter, smoker's pocket knives. So, I figured that the UNBRANDED, multi-tool with a glass cutter, smoker's pocket knife, was also a ROYAL BRAND CUTLERY Cᴏ̲ GERMANY, multi-tool with a glass cutter, smoker's pocket knife. Now I'm thinking that the UNBRANDED, multi-tool with a glass cutter, smoker's pocket knife, may be a DIXON CUTLERY Cᴏ̲ GERMANY, multi-tool with a glass cutter, smoker's pocket knife. Who knows.....

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
DIXON (over) CUTLERY Cᴏ̲ (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per GOINS, c 1920.

[Miller Bro's]

I like those two

[New_Windsor_NY]

I.....

Thank you, Dimitri.

[Miller Bro's]

Berk

[New_Windsor_NY]

Berk.....

Nice BERK, Dimitri.

[Miller Bro's]

Thanks Skip

[New_Windsor_NY]

Very recently, my visit to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (the two "tortoise" handle scales are missing), multi-tool, pocket knife. This pocket knife is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my forty-fourth MANOS, multi-tool pocket knife, with a glass cutter. My other forty-three MANOS, multi-tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a WEAK half stop. The main blade does NOT have an opening snap. The main blade does NOT have a closing snap. The secondary blade does have a WEAK half stop. The secondary blade does NOT have an opening snap. The secondary blade does NOT have a closing snap. The corkscrew and glass cutter, both open and close with no issues. This pocket knife is in FAIR condition. This pocket knife did NOT need cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** A PREVIOUS POST CORRECTION *****
Back on Thursday, October 30, 2025, I posted a BERK CUTLERY Cᴏ̲, multi tool pocket knife, with a glass cutter.
The following are two errors and two changes in my description of that pocket knife.
".....one tool (a glass cutter)" should read,
".....two tools (a glass cutter and a corkscrew)"

".....The glass cutter tool opens and closes, without any problems.", should read,
".....Both tools open and close without any problems."

Also, the caption for the picture of the tang stamp should say,
"The Secondary Blade Front Tang Stamp."
*************************************************

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None, But Probably From The 1920's.

[New_Windsor_NY]

Recently, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a UTICA, two blades, two tools (a corkscrew and a glass cutter), one secondary blade tang stamp, 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi-tool, pocket knife. It is also a cigar cutter. The secondary blade front stamp says, "UTICA Co (over) GERMANY" This is my fourth UTICA CO., multi-tool pocket knife, with a glass cutter. My other three UTICA CO., multi-tool pocket knives with a glass cutter, have ALL been previously posted, under this topic or thread. The main blade does have a SOFT half stop. The main blade does have a GOOD opening snap. The main blade does have a VERY GOOD closing snap. The secondary blade does have a SOFT half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a VERY GOOD closing snap. The corkscrew and the glass cutter, open and close with no problems. This pocket knife is in VERY GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
UTICA Co (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None.

[Miller Bro's]

Two more for the till

[New_Windsor_NY]

Two.....

Thank you, Dimitri.

[New_Windsor_NY]

Very recently, my visit to the post office produced this multi tool, pocket knife, with a glass cutter. It now becomes my most recent example to be posted under this topic or thread. It also became the most recent multi tool pocket knife, with a glass cutter, to be added to my collection. It is a GELBROS Co., one blade, four tools (a cap lifter or bottle opener with a screwdriver, a corkscrew, and a glass cutter), one tang stamp, 3 5/8" closed, all metal (except for the one "tortoise" handle scale. One "tortoise" handle scale is missing), multi tool, pocket knife. It is also a cigar cutter. The main blade front tang stamp says, "GELBROS Co. (over) GERMANY" This is my twelfth GELBROS Co., multi tool pocket knife, with a glass cutter. My other eleven GELBROS Co., multi tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a SOFT half stop. The main blade does have a GOOD opening snap. This main blade does have a VERY GOOD closing snap. The tools ALL open and close without any issues. Overall, this pocket knife is in VERY GOOD condition. It did NOT need cleaning at all.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
GELBROS Co (over) GERMANY - Main Blade Front Tang Stamp.
INFORMATION: per the 12th edition
"OFFICIAL PRICE GUIDE TO COLLECTOR KNIVES"
"Gelbros. Co. (Germany) - Gellman Brothers - c 1920"

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
The GELBROS Co. multi tool pocket knife, with a glass cutter, that I posted back on Saturday,
February 10, 2024, was actually my FIFTH, GELBROS Co., multi tool pocket knife with a glass cutter.
In my description, I erroneously said that it was my THIRD, GELBROS Co., multi tool pocket knife with a glass cutter.

[New_Windsor_NY]

Recently, my trip to the post office produced this multi-tool, with a glass cutter, pocket knife. It now becomes my latest example to be posted under this topic or thread. It also became the latest example to be added to my multi-tool, with a glass cutter, pocket knife collection. It is a MANOS, two blades, two tools (a corkscrew and a glass cutter), one tang stamp (on the secondary blade), 3 5/8" closed, all metal (except for the two "tortoise" handle scales), multi-tool, pocket knife. This pocket knife is also a cigar cutter. The secondary blade front tang stamp says, "MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY" This is my forty-fifth MANOS, multi-tool pocket knife, with a glass cutter. My other forty-four MANOS, multi-tool pocket knives, with a glass cutter, have ALL been previously posted, under and throughout, this topic or thread. The main blade does have a WEAK half stop. The main blade does have a GOOD opening snap. The main blade does have a GOOD closing snap. The secondary blade does have an OK half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a VERY GOOD closing snap. Both the corkscrew and the glass cutter, open and close with no problems. This pocket knife is in GOOD condition. This pocket knife did NOT require any cleaning at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.

***** NOTE ***** NOTE ***** NOTE ***** NOTE ***** NOTE *****
MANOS (over) CUTLERY Cᴏ̲ (over) GERMANY - Secondary Blade Front Tang Stamp.
INFORMATION: None, But Probably From The 1920's.