Japanese "Sabre" Brand Knives

A place to discuss & share pictures of knives made in Japan.
rjoknife
Posts: 15
Joined: Sat Mar 30, 2024 6:17 pm
Location: Mansfield, MA

Re: Japanese "Sabre" Brand Knives

Post by rjoknife »

Sabre 678. Really love the look of this one, almost translucent.
Attachments
PXL_20240330_180301477.jpg
PXL_20240330_180308443.jpg
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 14012
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Japanese "Sabre" Brand Knives

Post by New_Windsor_NY »

rjoknife wrote: Sat Mar 30, 2024 7:32 pm Sabre.....
BEAUTY! ::tu::
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
User avatar
Madmarco
Gold Tier
Gold Tier
Posts: 12039
Joined: Wed May 20, 2020 12:09 am
Location: Smack dab in the middle of Canada

Re: Japanese "Sabre" Brand Knives

Post by Madmarco »

Very cool folder, RJO, looks real good! ::nod::
8)
8)
threesco_07
Posts: 1
Joined: Wed May 08, 2024 2:25 pm

Re: Japanese "Sabre" Brand Knives

Post by threesco_07 »

Curious about my grandfather's knife.
My grandfather's knife
My grandfather's knife
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 14012
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Japanese "Sabre" Brand Knives

Post by New_Windsor_NY »

Recently, this pocket knife arrived in a group or lot of pocket knives that I bought. It now becomes my latest example to be posted under this topic or thread. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. However, it did turn out to be a keeper and it became the latest example to be added to my general, "foreign born", pocket knife accumulation. It is a Sabre 676, two blades, one tang stamp, 3 1/4" closed, one spring, pocket knife. The main blade front tang stamp says, "Sabre (over) STAINLESS (over) JAPAN (over) 676" The shield is missing. The main blade has a SOFT half stop. The main blade does have a GOOD opening snap and a SOFT closing snap. The secondary blade also has a SOFT half stop. The secondary blade does have an OK opening snap and NO closing snap.Overall, this pocket knife is in GOOD condition. It did need a little bit of a cleaning. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Attachments
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
The Main Blade Front Tang Stamp.
The Main Blade Front Tang Stamp.
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
cxtais
Posts: 6
Joined: Fri Dec 01, 2023 6:46 pm

Re: Japanese "Sabre" Brand Knives

Post by cxtais »

I have 1 that's made in Ireland
Attachments
20240522_145243.jpg
User avatar
Madmarco
Gold Tier
Gold Tier
Posts: 12039
Joined: Wed May 20, 2020 12:09 am
Location: Smack dab in the middle of Canada

Re: Japanese "Sabre" Brand Knives

Post by Madmarco »

cxtais wrote: Wed May 22, 2024 8:01 pm I have 1 that's made in Ireland
Very nice HOK, CXT, and ::welcome:: to AAPK! ::handshake::
8)
8)
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 14012
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Japanese "Sabre" Brand Knives

Post by New_Windsor_NY »

cxtais wrote: Wed May 22, 2024 8:01 pm I.....
Would you post it here also.
viewtopic.php?t=74297
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
Gtrclktr-351
Posts: 1361
Joined: Wed Mar 06, 2024 11:03 pm
Location: Danville, VA
Contact:

Re: Japanese "Sabre" Brand Knives

Post by Gtrclktr-351 »

The first “good” knife I purchased in the late 60s or early 70s was a Japanese Sabre serpentine jack. It was my daily carry before EDC was a thing. Mid to late 70s it was lost, or I think stolen by a contractor who was remodeling a bathroom. After I started searching pocket knives on eBay, I found an identical knife that I had to purchase. Of course, that led to searching for more serpentine jack knives. I need to not be sentimental about my old knives.
128660AE-09F4-401D-8F6A-BE1CF6FE2F36.jpeg
"One man's trash is another man's treasure."
Bill
User avatar
Madmarco
Gold Tier
Gold Tier
Posts: 12039
Joined: Wed May 20, 2020 12:09 am
Location: Smack dab in the middle of Canada

Re: Japanese "Sabre" Brand Knives

Post by Madmarco »

That's a cool HOK, G-351, and nothing wrong with being sentimental about what you consider a treasure. ::tu::
8)
8)
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 14012
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Japanese "Sabre" Brand Knives

Post by New_Windsor_NY »

This morning, this pocket knife arrived in a group or lot of pocket knives that I purchased. It now becomes my most recent example to be posted under this topic or thread. I did NOT purchase the group or lot of pocket knives to obtain this particular pocket knife. But, it did turn out to be a keeper. It now becomes the most recent example to be added to my general, "foreign born", pocket knife accumulation. It is a Sabre 617, two blades, one tang stamp, 4" closed, two springs, pocket knife. The main blade front tang stamp says, "Sabre (over) JAPAN (over) 617" The main blade does NOT have a half stop. The main blade does NOT have an opening snap. The main blade does have an OK closing snap. The secondary blade does have a WEAK half stop. The secondary blade does have an OK opening snap. The secondary blade does have an OK closing snap. Overall, this pocket knife is in VERY GOOD condition. It did NOT need any cleaning at all. I just wiped it off.
I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Attachments
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
The Main Blade Front Tang Stamp.
The Main Blade Front Tang Stamp.
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
cuttindux
Posts: 39
Joined: Fri Aug 23, 2024 3:32 am
Location: Oklahoma

Re: Japanese "Sabre" Brand Knives

Post by cuttindux »

IMG_2006.jpeg
IMG_2005.jpeg
IMG_2003.jpeg
This Sabre belonged to my late uncle. It was given to me by my dad recently. I cleaned it up some and started researching it just for giggles. That search led me to AAPK and sparked a new found interest in traditional pocket knives. I’ve bought a couple of old knives from folks here on AAPK and have had a wonderful time reading the forums each day. Just thought I’d share this beautiful, sentimental knife and say thanks to the group for the entertainment and information you all share.
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 14012
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Japanese "Sabre" Brand Knives

Post by New_Windsor_NY »

This morning, this scouting or camping, pattern or style of pocket knife, arrived in a very small group or lot of pocket knives that I bought. It now becomes my most recent example to be posted under this topic or thread. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. It now becomes the most recent example to be added to my general, "foreign born", pocket knife accumulation. It is a Sabre, one blade, four tools (a cap lifter or bottle opener with a screwdriver, a can opener, and a punch or awl), one tang stamp, 3 3/4" closed (not including the bail), scouting or camping, pattern or style of pocket knife. The main blade front tang stamp says, "Sabre (over) JAPAN (over) 619" The main blade does have a SOFT half stop. The main blade does have an OK opening snap. The main blade does NOT have a closing snap. The tools open and close with no problems. The main blade has a broken tip. This pocket knife is in GOOD condition. I did NOT clean this pocket knife at all. I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Attachments
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
The Main Blade Front Tang Stamp.
The Main Blade Front Tang Stamp.
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
MrJW
Posts: 37
Joined: Thu Sep 11, 2025 2:25 am

Re: Japanese "Sabre" Brand Knives

Post by MrJW »

Another Knife Collector wrote: Mon Nov 09, 2015 3:16 am They certainly aren't the best quality knives ever made, but I've recently developed an interest in collecting Japanese Sabre brand knives and decided to share what I have learned here. They are cheap and common, so they make a good affordable knife for a young collector or a collector on a tight budget. Sabre was a brand owned by Cole National Corporation, a company based in Ohio that dealt in a number of different markets. For a number of years Cole even owned Ka-Bar. The Sabre brand can be found on knives made all over the world, including Germany, Japan, USA, Pakistan, and Hong Kong. I've focused on the Japanese line as it seems to have been the most popular and longest lived of them. They were affordable knives, ones to give away, or to throw in a tool box or tackle box and not worry about. The Japanese made Sabres came in a variety of patterns and used a standard pattern number system. The earliest knives had no pattern numbers stamped on them but would fit into the standard system used later. Next, patterns began to be marked using a simple two digit number, and finally a three digit number. The three digit pattern numbers are all the same as the two digit, except with a "6" preceding the two digit number. For example, a "29" Large Barlow became a "629" Large Barlow, with no change in the actual knife. Sixes tend to look like fives on certain bad/damaged stamps they used. Japanese Sabres changed in material and manufacture through the years. They began with carbon steel blades, nickel silver bolsters, brass pins/liners and bone handles, and evolved to using all stainless blades and fittings and plastic handles.
I know this post is old but I just found 3 today in the original boxes and 2 master cartons. I believe two of the 616 and one 642 in faux pearl handles.
Attachments
1000015272.jpg
vvonder3gg
Posts: 1
Joined: Fri Dec 05, 2025 12:05 am

Re: Japanese "Sabre" Brand Knives

Post by vvonder3gg »

Stumbled on this thread looking for info on this old Sabre Japan knife I found. It’s in rough shape, but seems to be pre-stamps? Didn’t see any other photos like it in this thread so figured I’d contribute since it’s still active!
Attachments
IMG_4173.jpeg
IMG_4174.jpeg
IMG_4172.jpeg
IMG_4169.jpeg
User avatar
New_Windsor_NY
Gold Tier
Gold Tier
Posts: 14012
Joined: Thu Nov 08, 2018 4:50 pm
Location: I'm On The Far Right On The Left Coast In Commiefornia

Re: Japanese "Sabre" Brand Knives

Post by New_Windsor_NY »

Yesterday afternoon, this “stockman” pattern or style of pocket knife, arrived in a group or lot of pocket knives that I bought. It now becomes my latest example to be posted under this topic or thread. I did NOT buy the group or lot of pocket knives to obtain this particular pocket knife. But, it turned out to be a keeper. It did get added to my general, "foreign born", pocket knife accumulation. It is a Sabre, three blades, one tang stamp, 2 5/8” closed, two springs, stockman, pattern or style of pocket knife. The main blade front tang stamp says, "Sabre (over) STAINLESS (over) JAPAN (over) 638" The main blade does have a WEAK half stop. The main blade does have an OK opening snap. The main blade does NOT have a closing snap. The secondary blade does have a WEAK half stop. The secondary blade does have a GOOD opening snap. The secondary blade does have a GOOD closing snap. The third blade does have a WEAK half stop. The third blade does have an OK opening snap. The third blade does have a GOOD closing snap. This pocket knife is in EXCELLENT condition. This pocket knife did NOT need cleaning.
I just wiped it off. I took some pictures and here it is.
Caption(s), if any, are on the BOTTOM of the corresponding picture(s).
Click on a picture to ENLARGE.
Attachments
IMG_8161.jpeg
IMG_8166.jpeg
IMG_8170.jpeg
IMG_8179.jpeg
IMG_8188.jpeg
IMG_8194.jpeg
IMG_8199.jpeg
The Main Blade Front Tang Stamp.
The Main Blade Front Tang Stamp.
Kid: "Wish we had time to bury them fellas."
Josey Wales: "To hell with them fellas. Buzzards got to eat, same as worms."
Clint Eastwood-The Outlaw Josey Wales

Skip
Post Reply

Return to “Japanese-made knives”